[PATCH v2 00/15] powerpc/32s: Use BATs/LTLBs for STRICT_KERNEL_RWX
Jonathan Neuschäfer
j.neuschaefer at gmx.net
Tue Jan 15 11:33:53 AEDT 2019
On Mon, Jan 14, 2019 at 07:23:07PM +0100, Christophe Leroy wrote:
>
>
> Le 13/01/2019 à 22:02, Jonathan Neuschäfer a écrit :
> > On Sun, Jan 13, 2019 at 08:43:07PM +0100, Christophe Leroy wrote:
> > > Le 13/01/2019 à 19:16, Jonathan Neuschäfer a écrit :
> > > > I just tested the whole series on my Wii (I didn't test any intermediate
> > > > steps). Without CONFIG_STRICT_KERNEL_RWX, it seems to work fine, but
> > > > with it, I get the following error while booting:
[...]
> I can't see anything special in your setup, and this failure looks rather
> unexpected because I can't see anything done that early when
> CONFIG_STRICT_KERNEL_RWX is selected.
>
> Does CONFIG_STRICT_KERNEL_RWX works properly without my serie ?
I hadn't tried this before, but yes, without this series (on v5.0-rc2),
a kernel with CONFIG_STRICT_KERNEL_RWX boots.
I've checked it patch-by-patch now (with STRICT_KERNEL_RWX):
- patches 1 and 2 build and boot fine
- patches 3 to 6 build, but fail to boot with this error:
top of MEM2 @ 13F00000
zImage starting: loaded at 0x00e00000 (sp: 0x01588fa0)
Allocating 0x14e92c8 bytes for kernel...
Decompressing (0x00000000 <- 0x00e11000:0x01586ba7)...
Done! Decompressed 0xdc01f4 bytes
Linux/PowerPC load: root=/dev/mmcblk0p2 rootwait console=usbgecko1
Finalizing device tree... flat tree at 0x15897a0
[ 0.000000] printk: bootconsole [udbg0] enabled
[ 0.000000] Total memory = 319MB; using 1024kB for hash table (at (ptrval))
[ 0.000000] RAM mapped without BATs
[ 0.000000] RAM mapped without BATs
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] kernel BUG at arch/powerpc/mm/pgtable_32.c:223!
[ 0.000000] Oops: Exception in kernel mode, sig: 5 [#1]
[ 0.000000] BE PREEMPT
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc1-wii-00024-g596f9fe23c13 #1337
[ 0.000000] NIP: c0017c4c LR: c0a836a0 CTR: c001edc4
[ 0.000000] REGS: c0d9deb0 TRAP: 0700 Not tainted (5.0.0-rc1-wii-00024-g596f9fe23c13)
[ 0.000000] MSR: 00020030 <IR,DR> CR: 42000888 XER: 20000000
[ 0.000000]
[ 0.000000] GPR00: c0a836a0 c0d9df60 c0d2a4a0 c0d29c00 00000000 c16ff000 c0d9de28 c0dc0000
[ 0.000000] GPR08: c0d9c000 00000001 00000001 00000000 28000824 00000000 00000000 00000000
[ 0.000000] GPR16: 00000000 00000000 00000020 00000000 c0860000 c0da0000 c0000000 c0a7d000
[ 0.000000] GPR24: c0acd55c c0d487c8 13f00000 c0d29000 00000c00 00000311 c0000000 c0d487c8
[ 0.000000] NIP [c0017c4c] map_kernel_page+0x78/0xf0
[ 0.000000] LR [c0a836a0] mapin_ram+0xe0/0x14c
[ 0.000000] Call Trace:
[ 0.000000] [c0d9df60] [c0a83f54] mmu_mapin_ram+0x54/0x1a4 (unreliable)
[ 0.000000] [c0d9df90] [c0a836a0] mapin_ram+0xe0/0x14c
[ 0.000000] [c0d9dfd0] [c0a83578] MMU_init+0x158/0x1a0
[ 0.000000] [c0d9dff0] [c0003418] start_here+0x40/0x78
[ 0.000000] Instruction dump:
[ 0.000000] 55290026 57c5b53a 7ca54a14 3d204000 7f854800 3ca5c000 419e0088 81250000
[ 0.000000] 552afffe 552907fe 7d4a4b79 4082004c <0f0a0000> 54840026 7c84eb78 9081000c
[ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x34/0x6c with crng_init=0
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000]
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.000000] Rebooting in 180 seconds..
- patches 7 to 11 fail to build with this error (really a warning, but
arch/powerpc doesn't allow warnings by default):
CC arch/powerpc/mm/ppc_mmu_32.o
../arch/powerpc/mm/ppc_mmu_32.c:133:13: error: ‘clearibat’ defined but not used [-Werror=unused-function]
static void clearibat(int index)
^~~~~~~~~
../arch/powerpc/mm/ppc_mmu_32.c:115:13: error: ‘setibat’ defined but not used [-Werror=unused-function]
static void setibat(int index, unsigned long virt, phys_addr_t phys,
^~~~~~~
cc1: all warnings being treated as errors
- patches 12 to 15 build but fail to boot with this error:
top of MEM2 @ 13F00000
zImage starting: loaded at 0x01000000 (sp: 0x0178afa0)
Allocating 0x166b2c8 bytes for kernel...
Decompressing (0x00000000 <- 0x01011000:0x017880ce)...
Done! Decompressed 0xf421f4 bytes
Linux/PowerPC load: root=/dev/mmcblk0p2 rootwait console=usbgecko1
Finalizing device tree... flat tree at 0x178b7a0
[ 0.000000] printk: bootconsole [udbg0] enabled
[ 0.000000] Kernel panic - not syncing: ERROR: Failed to allocate 0x00100000 bytes below 0x00000000.
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc1-wii-00033-gc263f8162122 #1337
[ 0.000000] Call Trace:
[ 0.000000] [c0f1ff30] [c00280f0] panic+0x144/0x324 (unreliable)
[ 0.000000] [c0f1ff90] [c0c18a34] memblock_alloc_base+0x34/0x44
[ 0.000000] [c0f1ffa0] [c0c071e0] MMU_init_hw+0xcc/0x300
[ 0.000000] [c0f1ffd0] [c0c06554] MMU_init+0x12c/0x198
[ 0.000000] [c0f1fff0] [c0003418] start_here+0x40/0x78
[ 0.000000] Rebooting in 180 seconds..
I'll investigate some more tomorrow.
Jonathan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20190115/83862965/attachment.sig>
More information about the Linuxppc-dev
mailing list