[PATCH 00/18] Add FADump support on PowerNV platform

Daniel Axtens dja at axtens.net
Wed Feb 27 14:37:37 AEDT 2019


Hi Hari,

> Firmware-Assisted Dump (FADump) is currently supported only on pseries
> platform. This patch series adds support for powernv platform too.
>
> The first and third patches refactor the FADump code to make use of common
> code across multiple platforms. The fifth patch adds basic FADump support
> for powernv platform. Patches seven & eight honour reserved-ranges DT node
> while reserving/releasing memory used by FADump. The next patch processes
> CPU state data provided by firmware to create and append core notes to the
> ELF core file. The tenth patch adds support for preserving crash data for
> subsequent boots (useful in cases like petitboot). Patch twelve provides
> support to export opalcore. This is to make debugging of failures in OPAL
> code easier. The subsequent patch ensures vmcore processing is skipped
> when only OPAL core is exported by f/w. The next patch provides option to
> release the kernel memory used to export opalcore. Patch seventeen adds
> backup area (an area populated before crash and used in the capture kernel
> to setup vmcore file robustly) support on PowerNV platform. The remaining
> patches update Firmware-Assisted Dump documentation appropriately.
>
> Note that the quantam of increase in robustness due to patch seventeen may
> not be worth breaking backward compatibility for older kernel versions.
> Would like to hear thoughts from others on it.
>
> The patch series is tested with the latest firmware plus the below skiboot
> changes for MPIPL support:
>
>     https://patchwork.ozlabs.org/project/skiboot/list/?series=78497
>     ("MPIPL support")
>

If I want to test this, is there some userspace tooling that will
extract a fadump from a rebooted system and allow me to examine it as I
would with a kdump (e.g. with crash)?  I did look at
Documentation/powerpc/firmware-assisted-dump.txt but it seems to only
cover the kernel layer.

Regards,
Daniel

> ---
>
> Hari Bathini (18):
>       powerpc/fadump: move internal fadump code to a new file
>       powerpc/fadump: Improve fadump documentation
>       pseries/fadump: move out platform specific support from generic code
>       powerpc/fadump: use FADump instead of fadump for how it is pronounced
>       powerpc/fadump: enable fadump support on OPAL based POWER platform
>       powerpc/fadump: Update documentation about OPAL platform support
>       powerpc/fadump: consider reserved ranges while reserving memory
>       powerpc/fadump: consider reserved ranges while releasing memory
>       powernv/fadump: process architected register state data provided by firmware
>       powernv/fadump: add support to preserve crash data on FADUMP disabled kernel
>       powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
>       powerpc/powernv: export /proc/opalcore for analysing opal crashes
>       powernv/fadump: Skip processing /proc/vmcore when only OPAL core exists
>       powernv/opalcore: provide an option to invalidate /proc/opalcore file
>       powernv/fadump: consider f/w load area
>       powernv/fadump: update documentation about option to release opalcore
>       powernv/fadump: use backup area to map PIR to logical CPUs
>       powerpc/fadump: Update documentation about backup area support
>
>
>  Documentation/powerpc/firmware-assisted-dump.txt |  208 ++--
>  arch/powerpc/Kconfig                             |   23 
>  arch/powerpc/include/asm/fadump.h                |  190 ---
>  arch/powerpc/include/asm/opal-api.h              |   58 +
>  arch/powerpc/include/asm/opal.h                  |    1 
>  arch/powerpc/kernel/Makefile                     |    6 
>  arch/powerpc/kernel/fadump.c                     | 1199 ++++++++--------------
>  arch/powerpc/kernel/fadump_internal.c            |  297 +++++
>  arch/powerpc/kernel/fadump_internal.h            |  250 +++++
>  arch/powerpc/kernel/prom.c                       |    4 
>  arch/powerpc/platforms/powernv/Makefile          |    3 
>  arch/powerpc/platforms/powernv/opal-core.c       |  602 +++++++++++
>  arch/powerpc/platforms/powernv/opal-fadump.c     |  670 ++++++++++++
>  arch/powerpc/platforms/powernv/opal-fadump.h     |  116 ++
>  arch/powerpc/platforms/powernv/opal-wrappers.S   |    1 
>  arch/powerpc/platforms/pseries/Makefile          |    1 
>  arch/powerpc/platforms/pseries/pseries_fadump.c  |  535 ++++++++++
>  arch/powerpc/platforms/pseries/pseries_fadump.h  |   96 ++
>  18 files changed, 3252 insertions(+), 1008 deletions(-)
>  create mode 100644 arch/powerpc/kernel/fadump_internal.c
>  create mode 100644 arch/powerpc/kernel/fadump_internal.h
>  create mode 100644 arch/powerpc/platforms/powernv/opal-core.c
>  create mode 100644 arch/powerpc/platforms/powernv/opal-fadump.c
>  create mode 100644 arch/powerpc/platforms/powernv/opal-fadump.h
>  create mode 100644 arch/powerpc/platforms/pseries/pseries_fadump.c
>  create mode 100644 arch/powerpc/platforms/pseries/pseries_fadump.h
>
> --
> Signature


More information about the Linuxppc-dev mailing list