[PATCH v2 09/16] KVM: PPC: Book3S HV: XIVE: add a control to dirty the XIVE EQ pages
David Gibson
david at gibson.dropbear.id.au
Mon Feb 25 13:53:29 AEDT 2019
On Fri, Feb 22, 2019 at 12:28:33PM +0100, Cédric Le Goater wrote:
> When migration of a VM is initiated, a first copy of the RAM is
> transferred to the destination before the VM is stopped, but there is
> no guarantee that the EQ pages in which the event notification are
> queued have not been modified.
>
> To make sure migration will capture a consistent memory state, the
> XIVE device should perform a XIVE quiesce sequence to stop the flow of
> event notifications and stabilize the EQs. This is the purpose of the
> KVM_DEV_XIVE_EQ_SYNC control which will also marks the EQ pages dirty
> to force their transfer.
>
> Signed-off-by: Cédric Le Goater <clg at kaod.org>
> ---
> arch/powerpc/include/uapi/asm/kvm.h | 1 +
> arch/powerpc/kvm/book3s_xive_native.c | 67 ++++++++++++++++++++++
> Documentation/virtual/kvm/devices/xive.txt | 29 ++++++++++
> 3 files changed, 97 insertions(+)
>
> diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h
> index 289c504b7c1d..cd78ad1020fe 100644
> --- a/arch/powerpc/include/uapi/asm/kvm.h
> +++ b/arch/powerpc/include/uapi/asm/kvm.h
> @@ -678,6 +678,7 @@ struct kvm_ppc_cpu_char {
> /* POWER9 XIVE Native Interrupt Controller */
> #define KVM_DEV_XIVE_GRP_CTRL 1
> #define KVM_DEV_XIVE_RESET 1
> +#define KVM_DEV_XIVE_EQ_SYNC 2
> #define KVM_DEV_XIVE_GRP_SOURCE 2 /* 64-bit source attributes */
> #define KVM_DEV_XIVE_GRP_SOURCE_CONFIG 3 /* 64-bit source attributes */
> #define KVM_DEV_XIVE_GRP_EQ_CONFIG 4 /* 64-bit eq attributes */
> diff --git a/arch/powerpc/kvm/book3s_xive_native.c b/arch/powerpc/kvm/book3s_xive_native.c
> index dd2a9d411fe7..3debc876d5a0 100644
> --- a/arch/powerpc/kvm/book3s_xive_native.c
> +++ b/arch/powerpc/kvm/book3s_xive_native.c
> @@ -640,6 +640,70 @@ static int kvmppc_xive_reset(struct kvmppc_xive *xive)
> return 0;
> }
>
> +static void kvmppc_xive_native_sync_sources(struct kvmppc_xive_src_block *sb)
> +{
> + int j;
> +
> + for (j = 0; j < KVMPPC_XICS_IRQ_PER_ICS; j++) {
> + struct kvmppc_xive_irq_state *state = &sb->irq_state[j];
> + struct xive_irq_data *xd;
> + u32 hw_num;
> +
> + if (!state->valid)
> + continue;
> + if (state->act_priority == MASKED)
Is this correct? If you masked an irq, then immediately did a sync,
couldn't there still be some of the irqs in flight? I thought the
reason we needed a sync was that masking and other such operations
_didn't_ implicitly synchronize.
> + continue;
> +
> + arch_spin_lock(&sb->lock);
> + kvmppc_xive_select_irq(state, &hw_num, &xd);
> + xive_native_sync_source(hw_num);
> + xive_native_sync_queue(hw_num);
> + arch_spin_unlock(&sb->lock);
> + }
> +}
> +
> +static int kvmppc_xive_native_vcpu_eq_sync(struct kvm_vcpu *vcpu)
> +{
> + struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
> + unsigned int prio;
> +
> + if (!xc)
> + return -ENOENT;
> +
> + for (prio = 0; prio < KVMPPC_XIVE_Q_COUNT; prio++) {
> + struct xive_q *q = &xc->queues[prio];
> +
> + if (!q->qpage)
> + continue;
> +
> + /* Mark EQ page dirty for migration */
> + mark_page_dirty(vcpu->kvm, gpa_to_gfn(q->guest_qpage));
> + }
> + return 0;
> +}
> +
> +static int kvmppc_xive_native_eq_sync(struct kvmppc_xive *xive)
> +{
> + struct kvm *kvm = xive->kvm;
> + struct kvm_vcpu *vcpu;
> + unsigned int i;
> +
> + pr_devel("%s\n", __func__);
> +
> + for (i = 0; i <= xive->max_sbid; i++) {
> + if (xive->src_blocks[i])
> + kvmppc_xive_native_sync_sources(xive->src_blocks[i]);
> + }
> +
> + mutex_lock(&kvm->lock);
> + kvm_for_each_vcpu(i, vcpu, kvm) {
> + kvmppc_xive_native_vcpu_eq_sync(vcpu);
> + }
> + mutex_unlock(&kvm->lock);
> +
> + return 0;
> +}
> +
> static int kvmppc_xive_native_set_attr(struct kvm_device *dev,
> struct kvm_device_attr *attr)
> {
> @@ -650,6 +714,8 @@ static int kvmppc_xive_native_set_attr(struct kvm_device *dev,
> switch (attr->attr) {
> case KVM_DEV_XIVE_RESET:
> return kvmppc_xive_reset(xive);
> + case KVM_DEV_XIVE_EQ_SYNC:
> + return kvmppc_xive_native_eq_sync(xive);
> }
> break;
> case KVM_DEV_XIVE_GRP_SOURCE:
> @@ -688,6 +754,7 @@ static int kvmppc_xive_native_has_attr(struct kvm_device *dev,
> case KVM_DEV_XIVE_GRP_CTRL:
> switch (attr->attr) {
> case KVM_DEV_XIVE_RESET:
> + case KVM_DEV_XIVE_EQ_SYNC:
> return 0;
> }
> break;
> diff --git a/Documentation/virtual/kvm/devices/xive.txt b/Documentation/virtual/kvm/devices/xive.txt
> index 267634eae9e0..a26be635cff9 100644
> --- a/Documentation/virtual/kvm/devices/xive.txt
> +++ b/Documentation/virtual/kvm/devices/xive.txt
> @@ -23,6 +23,12 @@ the legacy interrupt mode, referred as XICS (POWER7/8).
> queues. To be used by kexec and kdump.
> Errors: none
>
> + 1.2 KVM_DEV_XIVE_EQ_SYNC (write only)
> + Sync all the sources and queues and mark the EQ pages dirty. This
> + to make sure that a consistent memory state is captured when
> + migrating the VM.
> + Errors: none
> +
> 2. KVM_DEV_XIVE_GRP_SOURCE (write only)
> Initializes a new source in the XIVE device and mask it.
> Attributes:
> @@ -95,3 +101,26 @@ the legacy interrupt mode, referred as XICS (POWER7/8).
> -ENOENT: Unknown source number
> -EINVAL: Not initialized source number, invalid priority or
> invalid CPU number.
> +
> +* Migration:
> +
> + Saving the state of a VM using the XIVE native exploitation mode
> + should follow a specific sequence. When the VM is stopped :
> +
> + 1. Mask all sources (PQ=01) to stop the flow of events.
> +
> + 2. Sync the XIVE device with the KVM control KVM_DEV_XIVE_EQ_SYNC to
> + flush any in-flight event notification and to stabilize the EQs. At
> + this stage, the EQ pages are marked dirty to make sure they are
> + transferred in the migration sequence.
> +
> + 3. Capture the state of the source targeting, the EQs configuration
> + and the state of thread interrupt context registers.
> +
> + Restore is similar :
> +
> + 1. Restore the EQ configuration. As targeting depends on it.
> + 2. Restore targeting
> + 3. Restore the thread interrupt contexts
> + 4. Restore the source states
> + 5. Let the vCPU run
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20190225/23dc7564/attachment-0001.sig>
More information about the Linuxppc-dev
mailing list