[PATCH v5 00/16] powerpc/32: Use BATs/LTLBs for STRICT_KERNEL_RWX
Christophe Leroy
christophe.leroy at c-s.fr
Fri Feb 22 06:08:36 AEDT 2019
The purpose of this serie is to:
- use BATs with STRICT_KERNEL_RWX on book3s (See patch 13 for details.)
- use LTLBs with STRICT_KERNEL_RWX on 8xx (See patch 15 for a few details.)
v5:
- Changed var type from unsigned long to phys_addr_t in mapin_ram()
to fix build failure due to type mismatch in min() macro (patch 4).
v4:
- Fixed mapin_ram() to only map mem below total_lowmem (patch 4)
- Fixed sparse warning by making __mmu_mapin_ram static (patch 13)
v3:
- Reordered to avoid build failure due to setibat() not being used for several steps in the serie.
Now the patch using setibat() is next to the one adding setibat().
- Fixed mmu_mapin_ram() in patch 3 to return base in all cases, thanks Jonathan for the test
- Fixed build failure on 8xx when CONFIG_PERF_EVENTS is set due to too many instructions in Exception 0x1200
- Made 8M alignment for data the default on 8xx when STRICT_KERNEL_RWX is selected.
- Added patch 1 to not set additionnal bat on the wii when requesting nobats. The only purpose of this patch
is to be backported, as this function is removed later in the series.
v2:
- Fix patch 2 (was patch 3 in v1) based on feedback from Jonathan.
- Added support for 8xx with LTLBs.
- Added systematic population of pagetables for Abatron BDI.
Christophe Leroy (16):
powerpc/wii: properly disable use of BATs when requested.
powerpc/mm/32: add base address to mmu_mapin_ram()
powerpc/mm/32s: rework mmu_mapin_ram()
powerpc/mm/32s: use generic mmu_mapin_ram() for all blocks.
powerpc/32: always populate page tables for Abatron BDI.
powerpc/wii: remove wii_mmu_mapin_mem2()
powerpc/mm/32s: use _PAGE_EXEC in setbat()
powerpc/32: add helper to write into segment registers
powerpc/mmu: add is_strict_kernel_rwx() helper
powerpc/kconfig: define PAGE_SHIFT inside Kconfig
powerpc/kconfig: define CONFIG_DATA_SHIFT and CONFIG_ETEXT_SHIFT
powerpc/mm/32s: add setibat() clearibat() and update_bats()
powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX
powerpc/kconfig: make _etext and data areas alignment configurable on
Book3s 32
powerpc/8xx: don't disable large TLBs with CONFIG_STRICT_KERNEL_RWX
powerpc/kconfig: make _etext and data areas alignment configurable on
8xx
arch/powerpc/Kconfig | 60 +++++++++
arch/powerpc/include/asm/book3s/32/mmu-hash.h | 2 +
arch/powerpc/include/asm/book3s/32/pgtable.h | 11 ++
arch/powerpc/include/asm/mmu.h | 11 ++
arch/powerpc/include/asm/nohash/32/mmu-8xx.h | 3 +-
arch/powerpc/include/asm/page.h | 13 +-
arch/powerpc/include/asm/reg.h | 5 +
arch/powerpc/kernel/head_32.S | 35 +++++
arch/powerpc/kernel/head_8xx.S | 54 ++++++--
arch/powerpc/kernel/vmlinux.lds.S | 9 +-
arch/powerpc/mm/40x_mmu.c | 2 +-
arch/powerpc/mm/44x_mmu.c | 2 +-
arch/powerpc/mm/8xx_mmu.c | 33 ++++-
arch/powerpc/mm/fsl_booke_mmu.c | 2 +-
arch/powerpc/mm/init_32.c | 6 +-
arch/powerpc/mm/mmu_decl.h | 10 +-
arch/powerpc/mm/pgtable_32.c | 42 +++---
arch/powerpc/mm/ppc_mmu_32.c | 180 ++++++++++++++++++++++----
arch/powerpc/platforms/embedded6xx/wii.c | 24 ----
19 files changed, 393 insertions(+), 111 deletions(-)
--
2.13.3
More information about the Linuxppc-dev
mailing list