[PATCHv6 3/4] pci: layerscape: Add the EP mode support.
Xiaowei Bao
xiaowei.bao at nxp.com
Wed Feb 20 14:09:01 AEDT 2019
-----Original Message-----
From: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
Sent: 2019年2月19日 19:27
To: Xiaowei Bao <xiaowei.bao at nxp.com>
Cc: bhelgaas at google.com; robh+dt at kernel.org; mark.rutland at arm.com; shawnguo at kernel.org; Leo Li <leoyang.li at nxp.com>; kishon at ti.com; arnd at arndb.de; gregkh at linuxfoundation.org; M.h. Lian <minghuan.lian at nxp.com>; Mingkai Hu <mingkai.hu at nxp.com>; Roy Zang <roy.zang at nxp.com>; kstewart at linuxfoundation.org; cyrille.pitchen at free-electrons.com; pombredanne at nexb.com; shawn.lin at rock-chips.com; linux-pci at vger.kernel.org; devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linuxppc-dev at lists.ozlabs.org
Subject: Re: [PATCHv6 3/4] pci: layerscape: Add the EP mode support.
On Tue, Jan 22, 2019 at 02:33:27PM +0800, Xiaowei Bao wrote:
> Add the PCIe EP mode support for layerscape platform.
>
> Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com>
> Reviewed-by: Minghuan Lian <minghuan.lian at nxp.com>
> Reviewed-by: Zhiqiang Hou <zhiqiang.hou at nxp.com>
> Reviewed-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
> depends on:
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpat
> chwork.kernel.org%2Fproject%2Flinux-pci%2Flist%2F%3Fseries%3D66177&
> ;data=02%7C01%7Cxiaowei.bao%40nxp.com%7C6f8772ba47c74d8ee0aa08d6965d3e
> b4%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636861724572611193&
> ;sdata=b3Acj0fu7c9vSoHe9VzeAkEMbMkpyfYPsXtf6fA8Flk%3D&reserved=0
>
> v2:
> - remove the EP mode check function.
> v3:
> - modif the return value when enter default case.
> v4:
> - no change.
> v5:
> - no change.
> v6:
> - modify the code base on the submit patch of the EP framework.
Can I apply this series to my pci/endpoint branch (where I queued Kishon's EP features rework patches) ? Can you check please ?
[Xiaowei Bao] of course, in my patch, I found a compile warning, but this series patch have approved by you, I don't know how to do, the compile warning: " struct pci_epc *epc = ep->epc;" in "ls_pcie_ep_init" function, I am so sorry, could you help me remove this code, thanks a lot.
Thanks,
Lorenzo
> drivers/pci/controller/dwc/Makefile | 2 +-
> drivers/pci/controller/dwc/pci-layerscape-ep.c | 157
> ++++++++++++++++++++++++
> 2 files changed, 158 insertions(+), 1 deletions(-) create mode
> 100644 drivers/pci/controller/dwc/pci-layerscape-ep.c
>
> diff --git a/drivers/pci/controller/dwc/Makefile
> b/drivers/pci/controller/dwc/Makefile
> index 7bcdcdf..b5f3b83 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -8,7 +8,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
> obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
> obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
> obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
> -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
> obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
> obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
> obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o diff --git
> a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> new file mode 100644
> index 0000000..ddc2dbb
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -0,0 +1,157 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe controller EP driver for Freescale Layerscape SoCs
> + *
> + * Copyright (C) 2018 NXP Semiconductor.
> + *
> + * Author: Xiaowei Bao <xiaowei.bao at nxp.com> */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/resource.h>
> +
> +#include "pcie-designware.h"
> +
> +#define PCIE_DBI2_OFFSET 0x1000 /* DBI2 base address*/
> +
> +struct ls_pcie_ep {
> + struct dw_pcie *pci;
> +};
> +
> +#define to_ls_pcie_ep(x) dev_get_drvdata((x)->dev)
> +
> +static int ls_pcie_establish_link(struct dw_pcie *pci) {
> + return 0;
> +}
> +
> +static const struct dw_pcie_ops ls_pcie_ep_ops = {
> + .start_link = ls_pcie_establish_link, };
> +
> +static const struct of_device_id ls_pcie_ep_of_match[] = {
> + { .compatible = "fsl,ls-pcie-ep",},
> + { },
> +};
> +
> +static const struct pci_epc_features ls_pcie_epc_features = {
> + .linkup_notifier = false,
> + .msi_capable = true,
> + .msix_capable = false,
> +};
> +
> +static const struct pci_epc_features* ls_pcie_ep_get_features(struct
> +dw_pcie_ep *ep) {
> + return &ls_pcie_epc_features;
> +}
> +
> +static void ls_pcie_ep_init(struct dw_pcie_ep *ep) {
> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> + struct pci_epc *epc = ep->epc;
> + enum pci_barno bar;
> +
> + for (bar = BAR_0; bar <= BAR_5; bar++)
> + dw_pcie_ep_reset_bar(pci, bar);
> +}
> +
> +static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> + enum pci_epc_irq_type type, u16 interrupt_num) {
> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +
> + switch (type) {
> + case PCI_EPC_IRQ_LEGACY:
> + return dw_pcie_ep_raise_legacy_irq(ep, func_no);
> + case PCI_EPC_IRQ_MSI:
> + return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
> + case PCI_EPC_IRQ_MSIX:
> + return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
> + default:
> + dev_err(pci->dev, "UNKNOWN IRQ type\n");
> + return -EINVAL;
> + }
> +}
> +
> +static struct dw_pcie_ep_ops pcie_ep_ops = {
> + .ep_init = ls_pcie_ep_init,
> + .raise_irq = ls_pcie_ep_raise_irq,
> + .get_features = ls_pcie_ep_get_features, };
> +
> +static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
> + struct platform_device *pdev)
> +{
> + struct dw_pcie *pci = pcie->pci;
> + struct device *dev = pci->dev;
> + struct dw_pcie_ep *ep;
> + struct resource *res;
> + int ret;
> +
> + ep = &pci->ep;
> + ep->ops = &pcie_ep_ops;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
> + if (!res)
> + return -EINVAL;
> +
> + ep->phys_base = res->start;
> + ep->addr_size = resource_size(res);
> +
> + ret = dw_pcie_ep_init(ep);
> + if (ret) {
> + dev_err(dev, "failed to initialize endpoint\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int __init ls_pcie_ep_probe(struct platform_device *pdev) {
> + struct device *dev = &pdev->dev;
> + struct dw_pcie *pci;
> + struct ls_pcie_ep *pcie;
> + struct resource *dbi_base;
> + int ret;
> +
> + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> + if (!pcie)
> + return -ENOMEM;
> +
> + pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
> + if (!pci)
> + return -ENOMEM;
> +
> + dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> + pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> + if (IS_ERR(pci->dbi_base))
> + return PTR_ERR(pci->dbi_base);
> +
> + pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> + pci->dev = dev;
> + pci->ops = &ls_pcie_ep_ops;
> + pcie->pci = pci;
> +
> + platform_set_drvdata(pdev, pcie);
> +
> + ret = ls_add_pcie_ep(pcie, pdev);
> +
> + return ret;
> +}
> +
> +static struct platform_driver ls_pcie_ep_driver = {
> + .driver = {
> + .name = "layerscape-pcie-ep",
> + .of_match_table = ls_pcie_ep_of_match,
> + .suppress_bind_attrs = true,
> + },
> +};
> +builtin_platform_driver_probe(ls_pcie_ep_driver, ls_pcie_ep_probe);
> --
> 1.7.1
>
More information about the Linuxppc-dev
mailing list