[PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode

[Xiaowei Bao]

-----Original Message-----
From: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com> 
Sent: 2019年2月6日 2:03
To: Xiaowei Bao <xiaowei.bao at nxp.com>
Cc: bhelgaas at google.com; robh+dt at kernel.org; mark.rutland at arm.com; shawnguo at kernel.org; Leo Li <leoyang.li at nxp.com>; kishon at ti.com; arnd at arndb.de; gregkh at linuxfoundation.org; M.h. Lian <minghuan.lian at nxp.com>; Mingkai Hu <mingkai.hu at nxp.com>; Roy Zang <roy.zang at nxp.com>; kstewart at linuxfoundation.org; cyrille.pitchen at free-electrons.com; pombredanne at nexb.com; shawn.lin at rock-chips.com; linux-pci at vger.kernel.org; devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linuxppc-dev at lists.ozlabs.org
Subject: Re: [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode

On Tue, Jan 22, 2019 at 02:33:25PM +0800, Xiaowei Bao wrote:
> Add the documentation for the Device Tree binding for the layerscape 
> PCIe controller with EP mode.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com>
> Reviewed-by: Minghuan Lian <minghuan.lian at nxp.com>
> Reviewed-by: Zhiqiang Hou <zhiqiang.hou at nxp.com>
> Reviewed-by: Rob Herring <robh+dt at kernel.org>
> ---
> v2:
>  - Add the SoC specific compatibles.
> v3:
>  - modify the commit message.
> v4:
>  - no change.
> v5:
>  - no change.
> v6:
>  - no change.
> 
>  .../devicetree/bindings/pci/layerscape-pci.txt     |    3 +++
>  1 files changed, 3 insertions(+), 0 deletions(-)

Applied the series to pci/layerscape for v5.1, thanks.
[Xiaowei Bao] Hi Lorenzo, thank a lot.

Lorenzo
> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt 
> b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> index 9b2b8d6..e20ceaa 100644
> --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> @@ -13,6 +13,7 @@ information.
>  
>  Required properties:
>  - compatible: should contain the platform identifier such as:
> +  RC mode:
>          "fsl,ls1021a-pcie"
>          "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
>          "fsl,ls2088a-pcie"
> @@ -20,6 +21,8 @@ Required properties:
>          "fsl,ls1046a-pcie"
>          "fsl,ls1043a-pcie"
>          "fsl,ls1012a-pcie"
> +  EP mode:
> +	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
>  - reg: base addresses and lengths of the PCIe controller register blocks.
>  - interrupts: A list of interrupt outputs of the controller. Must contain an
>    entry for each entry in the interrupt-names property.
> --
> 1.7.1
>