[PATCH 7/7] powerpc/eeh: Add eeh_force_recover to debugfs
Oliver
oohall at gmail.com
Wed Feb 13 16:18:41 AEDT 2019
On Wed, Feb 13, 2019 at 3:38 PM Sam Bobroff <sbobroff at linux.ibm.com> wrote:
>
> On Fri, Feb 08, 2019 at 02:08:02PM +1100, Oliver O'Halloran wrote:
> > This patch adds a debugfs interface to force scheduling a recovery event.
> > This can be used to recover a specific PE or schedule a "special" recovery
> > even that checks for errors at the PHB level.
> > To force a recovery of a normal PE, use:
> >
> > echo '<#pe>:<#phb>' > /sys/kernel/debug/powerpc/eeh_force_recover
>
> How about placing these in the per-PHB debugfs directory?
> echo '<#pe>' > /sys/kernel/debug/powerpc/PCI0000/eeh_force_recover
>
> > To force a scan broken PHBs:
> >
> > echo 'null' > /sys/kernel/debug/powerpc/eeh_force_recover
>
> And keep this one where it is, and just trigger with any write (or a '1'
> or whatever)?
The per-PHB directories only exist on PowerNV. I'd rather this was
merged as-is since it handles both platforms. If we want to add the
per-PHB debugfs stuff to pseries we can do it later.
>
> Sam.
>
> > Signed-off-by: Oliver O'Halloran <oohall at gmail.com>
> > ---
> > arch/powerpc/include/asm/eeh_event.h | 1 +
> > arch/powerpc/kernel/eeh.c | 60 ++++++++++++++++++++++++++++
> > arch/powerpc/kernel/eeh_event.c | 25 +++++++-----
> > 3 files changed, 76 insertions(+), 10 deletions(-)
> >
> > diff --git a/arch/powerpc/include/asm/eeh_event.h b/arch/powerpc/include/asm/eeh_event.h
> > index 9884e872686f..6d0412b846ac 100644
> > --- a/arch/powerpc/include/asm/eeh_event.h
> > +++ b/arch/powerpc/include/asm/eeh_event.h
> > @@ -33,6 +33,7 @@ struct eeh_event {
> >
> > int eeh_event_init(void);
> > int eeh_send_failure_event(struct eeh_pe *pe);
> > +int __eeh_send_failure_event(struct eeh_pe *pe);
> > void eeh_remove_event(struct eeh_pe *pe, bool force);
> > void eeh_handle_normal_event(struct eeh_pe *pe);
> > void eeh_handle_special_event(void);
> > diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
> > index 92809b137e39..63b91a4918c9 100644
> > --- a/arch/powerpc/kernel/eeh.c
> > +++ b/arch/powerpc/kernel/eeh.c
> > @@ -1805,6 +1805,63 @@ static int eeh_enable_dbgfs_get(void *data, u64 *val)
> >
> > DEFINE_DEBUGFS_ATTRIBUTE(eeh_enable_dbgfs_ops, eeh_enable_dbgfs_get,
> > eeh_enable_dbgfs_set, "0x%llx\n");
> > +
> > +static ssize_t eeh_force_recover_write(struct file *filp,
> > + const char __user *user_buf,
> > + size_t count, loff_t *ppos)
> > +{
> > + struct pci_controller *hose;
> > + uint32_t phbid, pe_no;
> > + struct eeh_pe *pe;
> > + char buf[20];
> > + int ret;
> > +
> > + ret = simple_write_to_buffer(buf, sizeof(buf), ppos, user_buf, count);
> > + if (!ret)
> > + return -EFAULT;
> > +
> > + /*
> > + * When PE is NULL the event is a "special" event. Rather than
> > + * recovering a specific PE it forces the EEH core to scan for failed
> > + * PHBs and recovers each. This needs to be done before any device
> > + * recoveries can occur.
> > + */
> > + if (!strncmp(buf, "null", 4)) {
> > + pr_err("sending failure event\n");
> > + __eeh_send_failure_event(NULL);
> > + return count;
> > + }
> > +
> > + ret = sscanf(buf, "%x:%x", &phbid, &pe_no);
> > + if (ret != 2)
> > + return -EINVAL;
> > +
> > + hose = pci_find_hose_for_domain(phbid);
> > + if (!hose)
> > + return -ENODEV;
> > +
> > + /* Retrieve PE */
> > + pe = eeh_pe_get(hose, pe_no, 0);
> > + if (!pe)
> > + return -ENODEV;
> > +
> > + /*
> > + * We don't do any state checking here since the detection
> > + * process is async to the recovery process. The recovery
> > + * thread *should* not break even if we schedule a recovery
> > + * from an odd state (e.g. PE removed, or recovery of a
> > + * non-isolated PE)
> > + */
> > + __eeh_send_failure_event(pe);
> > +
> > + return ret < 0 ? ret : count;
> > +}
> > +
> > +static const struct file_operations eeh_force_recover_fops = {
> > + .open = simple_open,
> > + .llseek = no_llseek,
> > + .write = eeh_force_recover_write,
> > +};
> > #endif
> >
> > static int __init eeh_init_proc(void)
> > @@ -1820,6 +1877,9 @@ static int __init eeh_init_proc(void)
> > debugfs_create_bool("eeh_disable_recovery", 0600,
> > powerpc_debugfs_root,
> > &eeh_debugfs_no_recover);
> > + debugfs_create_file_unsafe("eeh_force_recover", 0600,
> > + powerpc_debugfs_root, NULL,
> > + &eeh_force_recover_fops);
> > eeh_cache_debugfs_init();
> > #endif
> > }
> > diff --git a/arch/powerpc/kernel/eeh_event.c b/arch/powerpc/kernel/eeh_event.c
> > index 19837798bb1d..539aca055d70 100644
> > --- a/arch/powerpc/kernel/eeh_event.c
> > +++ b/arch/powerpc/kernel/eeh_event.c
> > @@ -121,20 +121,11 @@ int eeh_event_init(void)
> > * the actual event will be delivered in a normal context
> > * (from a workqueue).
> > */
> > -int eeh_send_failure_event(struct eeh_pe *pe)
> > +int __eeh_send_failure_event(struct eeh_pe *pe)
> > {
> > unsigned long flags;
> > struct eeh_event *event;
> >
> > - /*
> > - * If we've manually supressed recovery events via debugfs
> > - * then just drop it on the floor.
> > - */
> > - if (eeh_debugfs_no_recover) {
> > - pr_err("EEH: Event dropped due to no_recover setting\n");
> > - return 0;
> > - }
> > -
> > event = kzalloc(sizeof(*event), GFP_ATOMIC);
> > if (!event) {
> > pr_err("EEH: out of memory, event not handled\n");
> > @@ -153,6 +144,20 @@ int eeh_send_failure_event(struct eeh_pe *pe)
> > return 0;
> > }
> >
> > +int eeh_send_failure_event(struct eeh_pe *pe)
> > +{
> > + /*
> > + * If we've manually supressed recovery events via debugfs
> > + * then just drop it on the floor.
> > + */
> > + if (eeh_debugfs_no_recover) {
> > + pr_err("EEH: Event dropped due to no_recover setting\n");
> > + return 0;
> > + }
> > +
> > + return __eeh_send_failure_event(pe);
> > +}
> > +
> > /**
> > * eeh_remove_event - Remove EEH event from the queue
> > * @pe: Event binding to the PE
> > --
> > 2.20.1
> >
More information about the Linuxppc-dev
mailing list