[RFC PATCH v1 14/16] powerpc/32: implement fast entry for syscalls on non BOOKE
christophe leroy
christophe.leroy at c-s.fr
Mon Feb 11 05:05:35 AEDT 2019
Le 08/02/2019 à 13:52, Christophe Leroy a écrit :
> This patch implements a fast entry for syscalls.
>
> Syscalls don't have to preserve non volatile registers except LR.
>
> This patch then implement a fast entry for syscalls, where
> volatile registers get clobbered.
>
> As this entry is dedicated to syscall it always sets MSR_EE
> and warns in case MSR_EE was previously off
>
> It also assumes that the call is always from user, system calls are
> unexpected from kernel.
>
> The overall series improves null_syscall selftest by 12,5% on an 83xx
> and by 17% on a 8xx.
>
> Signed-off-by: Christophe Leroy <christophe.leroy at c-s.fr>
The following addition is required to avoid build failure on 40x as
global_dbcr0 is going to be accessed from head_40x.S
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 85f1fc88c237..987f0fafc999 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -1247,6 +1247,7 @@ load_dbcr0:
.section .bss
.align 4
+ .global global_dbcr0
global_dbcr0:
.space 8*NR_CPUS
.previous
Christophe
> ---
> arch/powerpc/kernel/entry_32.S | 42 +++++++++++++++++++++
> arch/powerpc/kernel/head_32.S | 3 +-
> arch/powerpc/kernel/head_32.h | 85 ++++++++++++++++++++++++++++++++++++++++--
> arch/powerpc/kernel/head_40x.S | 3 +-
> arch/powerpc/kernel/head_8xx.S | 3 +-
> 5 files changed, 126 insertions(+), 10 deletions(-)
>
> diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
> index 1e11528d45ae..137bd2103051 100644
> --- a/arch/powerpc/kernel/entry_32.S
> +++ b/arch/powerpc/kernel/entry_32.S
> @@ -335,6 +335,46 @@ stack_ovf:
> SYNC
> RFI
>
> +#ifndef CONFIG_BOOKE /* to be removed once BOOKE uses fast syscall entry */
> +#ifdef CONFIG_TRACE_IRQFLAGS
> +trace_syscall_entry_irq_off:
> + /*
> + * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
> + * If from user mode there is only one stack frame on the stack, and
> + * accessing CALLER_ADDR1 will cause oops. So we need create a dummy
> + * stack frame to make trace_hardirqs_on happy.
> + *
> + */
> + stwu r1,-32(r1)
> +
> + /*
> + * Syscall shouldn't happen while interrupts are disabled,
> + * so let's do a warning here.
> + */
> +0: trap
> + EMIT_BUG_ENTRY 0b,__FILE__,__LINE__, BUGFLAG_WARNING
> + bl trace_hardirqs_on
> +
> + addi r1,r1,32
> +
> + /* Now enable for real */
> + LOAD_MSR_KERNEL(r10, MSR_KERNEL | MSR_EE)
> + mtmsr r10
> +
> + REST_GPR(0, r1)
> + REST_4GPRS(3, r1)
> + REST_2GPRS(7, r1)
> + b DoSyscall
> +#endif /* CONFIG_TRACE_IRQFLAGS */
> +
> + .globl transfer_to_syscall
> +transfer_to_syscall:
> +#ifdef CONFIG_TRACE_IRQFLAGS
> + andi. r12,r9,MSR_EE
> + beq- trace_syscall_entry_irq_off
> +#endif /* CONFIG_TRACE_IRQFLAGS */
> +#endif /* !CONFIG_BOOKE */
> +
> /*
> * Handle a system call.
> */
> @@ -346,9 +386,11 @@ _GLOBAL(DoSyscall)
> stw r3,ORIG_GPR3(r1)
> li r12,0
> stw r12,RESULT(r1)
> +#ifdef CONFIG_BOOKE /* to be removed once BOOKE uses fast syscall entry */
> lwz r11,_CCR(r1) /* Clear SO bit in CR */
> rlwinm r11,r11,0,4,2
> stw r11,_CCR(r1)
> +#endif
>
> #ifdef CONFIG_TRACE_IRQFLAGS
> /* Make sure interrupts are enabled */
> diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
> index 3a1df9edf6da..7576e1374a69 100644
> --- a/arch/powerpc/kernel/head_32.S
> +++ b/arch/powerpc/kernel/head_32.S
> @@ -368,8 +368,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
> . = 0xc00
> DO_KVM 0xc00
> SystemCall:
> - EXCEPTION_PROLOG
> - EXC_XFER_SYS(0xc00, DoSyscall)
> + SYSCALL_ENTRY 0xc00
>
> /* Single step - not used on 601 */
> EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
> diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
> index 14cb0af2f494..4a692553651f 100644
> --- a/arch/powerpc/kernel/head_32.h
> +++ b/arch/powerpc/kernel/head_32.h
> @@ -73,6 +73,87 @@
> SAVE_2GPRS(7, r11)
> .endm
>
> +.macro SYSCALL_ENTRY trapno
> + mfspr r12,SPRN_SPRG_THREAD
> + mfcr r10
> + lwz r11,TASK_STACK-THREAD(r12)
> + mflr r9
> + addi r11,r11,THREAD_SIZE - INT_FRAME_SIZE
> + rlwinm r10,r10,0,4,2 /* Clear SO bit in CR */
> + tophys(r11,r11)
> + stw r10,_CCR(r11) /* save registers */
> + mfspr r10,SPRN_SRR0
> + stw r9,_LINK(r11)
> + mfspr r9,SPRN_SRR1
> + stw r1,GPR1(r11)
> + stw r1,0(r11)
> + tovirt(r1,r11) /* set new kernel sp */
> + stw r10,_NIP(r11)
> +#ifdef CONFIG_40x
> + rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */
> +#else
> + LOAD_MSR_KERNEL(r10, MSR_KERNEL & ~(MSR_IR|MSR_DR)) /* can take exceptions */
> + MTMSRD(r10) /* (except for mach check in rtas) */
> +#endif
> + lis r10,STACK_FRAME_REGS_MARKER at ha /* exception frame marker */
> + stw r2,GPR2(r11)
> + addi r10,r10,STACK_FRAME_REGS_MARKER at l
> + stw r9,_MSR(r11)
> + li r2, \trapno + 1
> + stw r10,8(r11)
> + stw r2,_TRAP(r11)
> + SAVE_GPR(0, r11)
> + SAVE_4GPRS(3, r11)
> + SAVE_2GPRS(7, r11)
> + addi r11,r1,STACK_FRAME_OVERHEAD
> + addi r2,r12,-THREAD
> + stw r11,PT_REGS(r12)
> +#if defined(CONFIG_40x)
> + /* Check to see if the dbcr0 register is set up to debug. Use the
> + internal debug mode bit to do this. */
> + lwz r12,THREAD_DBCR0(r12)
> + andis. r12,r12,DBCR0_IDM at h
> +#endif
> + ACCOUNT_CPU_USER_ENTRY(r2, r11, r12)
> +#if defined(CONFIG_40x)
> + beq+ 3f
> + /* From user and task is ptraced - load up global dbcr0 */
> + li r12,-1 /* clear all pending debug events */
> + mtspr SPRN_DBSR,r12
> + lis r11,global_dbcr0 at ha
> + tophys(r11,r11)
> + addi r11,r11,global_dbcr0 at l
> + lwz r12,0(r11)
> + mtspr SPRN_DBCR0,r12
> + lwz r12,4(r11)
> + addi r12,r12,-1
> + stw r12,4(r11)
> +#endif
> +
> +3:
> + tovirt(r2, r2) /* set r2 to current */
> + lis r11, transfer_to_syscall at h
> + ori r11, r11, transfer_to_syscall at l
> +#ifdef CONFIG_TRACE_IRQFLAGS
> + /*
> + * If MSR is changing we need to keep interrupts disabled at this point
> + * otherwise we might risk taking an interrupt before we tell lockdep
> + * they are enabled.
> + */
> + LOAD_MSR_KERNEL(r10, MSR_KERNEL)
> + rlwimi r10, r9, 0, MSR_EE
> +#else
> + LOAD_MSR_KERNEL(r10, MSR_KERNEL | MSR_EE)
> +#endif
> +#if defined(CONFIG_PPC_8xx) && defined(CONFIG_PERF_EVENTS)
> + mtspr SPRN_NRI, r0
> +#endif
> + mtspr SPRN_SRR1,r10
> + mtspr SPRN_SRR0,r11
> + SYNC
> + RFI /* jump to handler, enable MMU */
> +.endm
> +
> /*
> * Note: code which follows this uses cr0.eq (set if from kernel),
> * r11, r12 (SRR0), and r9 (SRR1).
> @@ -119,8 +200,4 @@
> EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, transfer_to_handler, \
> ret_from_except)
>
> -#define EXC_XFER_SYS(n, hdlr) \
> - EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL | MSR_EE, transfer_to_handler, \
> - ret_from_except)
> -
> #endif /* __HEAD_32_H__ */
> diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
> index 1afab9190147..f5704488c4fc 100644
> --- a/arch/powerpc/kernel/head_40x.S
> +++ b/arch/powerpc/kernel/head_40x.S
> @@ -348,8 +348,7 @@ _ENTRY(saved_ksp_limit)
>
> /* 0x0C00 - System Call Exception */
> START_EXCEPTION(0x0C00, SystemCall)
> - EXCEPTION_PROLOG
> - EXC_XFER_SYS(0xc00, DoSyscall)
> + SYSCALL_ENTRY 0xc00
>
> EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_STD)
> EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_STD)
> diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
> index 336b9921c0da..362b2150a3a0 100644
> --- a/arch/powerpc/kernel/head_8xx.S
> +++ b/arch/powerpc/kernel/head_8xx.S
> @@ -185,8 +185,7 @@ Alignment:
> /* System call */
> . = 0xc00
> SystemCall:
> - EXCEPTION_PROLOG
> - EXC_XFER_SYS(0xc00, DoSyscall)
> + SYSCALL_ENTRY 0xc00
>
> /* Single step - not used on 601 */
> EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
>
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus
More information about the Linuxppc-dev
mailing list