[PATCH kernel v2 2/4] powerpc/pseries: Allow not having ibm, hypertas-functions::hcall-multi-tce for DDW

Thiago Jung Bauermann bauerman at linux.ibm.com
Tue Dec 17 10:07:35 AEDT 2019


Alexey Kardashevskiy <aik at ozlabs.ru> writes:

> By default a pseries guest supports a H_PUT_TCE hypercall which maps
> a single IOMMU page in a DMA window. Additionally the hypervisor may
> support H_PUT_TCE_INDIRECT/H_STUFF_TCE which update multiple TCEs at once;
> this is advertised via the device tree /rtas/ibm,hypertas-functions
> property which Linux converts to FW_FEATURE_MULTITCE.
>
> FW_FEATURE_MULTITCE is checked when dma_iommu_ops is used; however
> the code managing the huge DMA window (DDW) ignores it and calls
> H_PUT_TCE_INDIRECT even if it is explicitly disabled via
> the "multitce=off" kernel command line parameter.
>
> This adds FW_FEATURE_MULTITCE checking to the DDW code path.
>
> This changes tce_build_pSeriesLP to take liobn and page size as
> the huge window does not have iommu_table descriptor which usually
> the place to store these numbers.
>
> Fixes: 4e8b0cf46b25 ("powerpc/pseries: Add support for dynamic dma windows")
> Signed-off-by: Alexey Kardashevskiy <aik at ozlabs.ru>

Reviewed-by: Thiago Jung Bauermann <bauerman at linux.ibm.com>
Tested-by: Thiago Jung Bauermann <bauerman at linux.ibm.com>

Some minor nits below. Feel free to ignore.

> @@ -146,25 +146,25 @@ static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
>  	int ret = 0;
>  	long tcenum_start = tcenum, npages_start = npages;
>
> -	rpn = __pa(uaddr) >> TCE_SHIFT;
> +	rpn = __pa(uaddr) >> tceshift;
>  	proto_tce = TCE_PCI_READ;
>  	if (direction != DMA_TO_DEVICE)
>  		proto_tce |= TCE_PCI_WRITE;
>
>  	while (npages--) {
> -		tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
> -		rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce);
> +		tce = proto_tce | (rpn & TCE_RPN_MASK) << tceshift;
> +		rc = plpar_tce_put((u64)liobn, (u64)tcenum << tceshift, tce);

Is it necessary to cast to u64 here? plpar_tce_put() takes unsigned long
for both arguments.

> @@ -261,16 +263,16 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
>  	return ret;
>  }
>
> -static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
> +static void tce_free_pSeriesLP(unsigned long liobn, long tcenum, long npages)
>  {
>  	u64 rc;
>
>  	while (npages--) {
> -		rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, 0);
> +		rc = plpar_tce_put((u64)liobn, (u64)tcenum << 12, 0);

Same comment regarding cast to u64.

> @@ -400,6 +402,20 @@ static int tce_setrange_multi_pSeriesLP(unsigned long start_pfn,
>  	u64 rc = 0;
>  	long l, limit;
>
> +	if (!firmware_has_feature(FW_FEATURE_MULTITCE)) {
> +		unsigned long tceshift = be32_to_cpu(maprange->tce_shift);
> +		unsigned long dmastart = (start_pfn << PAGE_SHIFT) +
> +				be64_to_cpu(maprange->dma_base);
> +		unsigned long tcenum = dmastart >> tceshift;
> +		unsigned long npages = num_pfn << PAGE_SHIFT >>
> +				be32_to_cpu(maprange->tce_shift);

Could use the tceshift variable here.

> +		void *uaddr = __va(start_pfn << PAGE_SHIFT);
> +
> +		return tce_build_pSeriesLP(be32_to_cpu(maprange->liobn),
> +				tcenum, tceshift, npages, (unsigned long) uaddr,
> +				DMA_BIDIRECTIONAL, 0);
> +	}
> +
>  	local_irq_disable();	/* to protect tcep and the page behind it */
>  	tcep = __this_cpu_read(tce_page);


--
Thiago Jung Bauermann
IBM Linux Technology Center


More information about the Linuxppc-dev mailing list