[PATCH v2 08/10] PCI: layerscape: Add EP mode support for ls1088a and ls2088a
Andrew Murray
andrew.murray at arm.com
Wed Aug 28 19:01:08 AEST 2019
On Wed, Aug 28, 2019 at 04:29:32AM +0000, Xiaowei Bao wrote:
>
>
> > -----Original Message-----
> > From: Andrew Murray <andrew.murray at arm.com>
> > Sent: 2019年8月27日 21:34
> > To: Xiaowei Bao <xiaowei.bao at nxp.com>
> > Cc: bhelgaas at google.com; robh+dt at kernel.org; mark.rutland at arm.com;
> > shawnguo at kernel.org; Leo Li <leoyang.li at nxp.com>; kishon at ti.com;
> > lorenzo.pieralisi at arm.co; arnd at arndb.de; gregkh at linuxfoundation.org; M.h.
> > Lian <minghuan.lian at nxp.com>; Mingkai Hu <mingkai.hu at nxp.com>; Roy
> > Zang <roy.zang at nxp.com>; jingoohan1 at gmail.com;
> > gustavo.pimentel at synopsys.com; linux-pci at vger.kernel.org;
> > devicetree at vger.kernel.org; linux-kernel at vger.kernel.org;
> > linux-arm-kernel at lists.infradead.org; linuxppc-dev at lists.ozlabs.org
> > Subject: Re: [PATCH v2 08/10] PCI: layerscape: Add EP mode support for
> > ls1088a and ls2088a
> >
> > On Mon, Aug 26, 2019 at 09:49:35AM +0000, Xiaowei Bao wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Andrew Murray <andrew.murray at arm.com>
> > > > Sent: 2019年8月23日 22:28
> > > > To: Xiaowei Bao <xiaowei.bao at nxp.com>
> > > > Cc: bhelgaas at google.com; robh+dt at kernel.org; mark.rutland at arm.com;
> > > > shawnguo at kernel.org; Leo Li <leoyang.li at nxp.com>; kishon at ti.com;
> > > > lorenzo.pieralisi at arm.co; arnd at arndb.de; gregkh at linuxfoundation.org;
> > M.h.
> > > > Lian <minghuan.lian at nxp.com>; Mingkai Hu <mingkai.hu at nxp.com>; Roy
> > > > Zang <roy.zang at nxp.com>; jingoohan1 at gmail.com;
> > > > gustavo.pimentel at synopsys.com; linux-pci at vger.kernel.org;
> > > > devicetree at vger.kernel.org; linux-kernel at vger.kernel.org;
> > > > linux-arm-kernel at lists.infradead.org; linuxppc-dev at lists.ozlabs.org
> > > > Subject: Re: [PATCH v2 08/10] PCI: layerscape: Add EP mode support
> > > > for ls1088a and ls2088a
> > > >
> > > > On Thu, Aug 22, 2019 at 07:22:40PM +0800, Xiaowei Bao wrote:
> > > > > Add PCIe EP mode support for ls1088a and ls2088a, there are some
> > > > > difference between LS1 and LS2 platform, so refactor the code of
> > > > > the EP driver.
> > > > >
> > > > > Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com>
> > > > > ---
> > > > > v2:
> > > > > - New mechanism for layerscape EP driver.
> > > >
> > > > Was there a v1 of this patch?
> > > >
> > > > >
> > > > > drivers/pci/controller/dwc/pci-layerscape-ep.c | 76
> > > > > ++++++++++++++++++++------
> > > > > 1 file changed, 58 insertions(+), 18 deletions(-)
> > > > >
> > > > > diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > > b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > > index 7ca5fe8..2a66f07 100644
> > > > > --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > > +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > > @@ -20,27 +20,29 @@
> > > > >
> > > > > #define PCIE_DBI2_OFFSET 0x1000 /* DBI2 base address*/
> > > > >
> > > > > -struct ls_pcie_ep {
> > > > > - struct dw_pcie *pci;
> > > > > - struct pci_epc_features *ls_epc;
> > > > > +#define to_ls_pcie_ep(x) dev_get_drvdata((x)->dev)
> > > > > +
> > > > > +struct ls_pcie_ep_drvdata {
> > > > > + u32 func_offset;
> > > > > + const struct dw_pcie_ep_ops *ops;
> > > > > + const struct dw_pcie_ops *dw_pcie_ops;
> > > > > };
> > > > >
> > > > > -#define to_ls_pcie_ep(x) dev_get_drvdata((x)->dev)
> > > > > +struct ls_pcie_ep {
> > > > > + struct dw_pcie *pci;
> > > > > + struct pci_epc_features *ls_epc;
> > > > > + const struct ls_pcie_ep_drvdata *drvdata; };
> > > > >
> > > > > static int ls_pcie_establish_link(struct dw_pcie *pci) {
> > > > > return 0;
> > > > > }
> > > > >
> > > > > -static const struct dw_pcie_ops ls_pcie_ep_ops = {
> > > > > +static const struct dw_pcie_ops dw_ls_pcie_ep_ops = {
> > > > > .start_link = ls_pcie_establish_link, };
> > > > >
> > > > > -static const struct of_device_id ls_pcie_ep_of_match[] = {
> > > > > - { .compatible = "fsl,ls-pcie-ep",},
> > > > > - { },
> > > > > -};
> > > > > -
> > > > > static const struct pci_epc_features*
> > > > > ls_pcie_ep_get_features(struct dw_pcie_ep *ep) { @@ -82,10 +84,44
> > > > > @@ static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> > > > > }
> > > > > }
> > > > >
> > > > > -static const struct dw_pcie_ep_ops pcie_ep_ops = {
> > > > > +static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep
> > *ep,
> > > > > + u8 func_no)
> > > > > +{
> > > > > + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > + struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
> > > > > + u8 header_type;
> > > > > +
> > > > > + header_type = ioread8(pci->dbi_base + PCI_HEADER_TYPE);
> > > > > +
> > > > > + if (header_type & (1 << 7))
> > > > > + return pcie->drvdata->func_offset * func_no;
> > > > > + else
> > > > > + return 0;
> > > >
> > > > It looks like there isn't a PCI define for multi function, the
> > > > nearest I could find was PCI_HEADER_TYPE_MULTIDEVICE in
> > > > hotplug/ibmphp.h. A comment above the test might be helpful to explain
> > the test.
> > >
> > > OK, I will add a comment above this code.
> > >
> > > >
> > > > As the ls_pcie_ep_drvdata structures are static, the unset
> > > > .func_offset will be initialised to 0, so you could just drop the test above.
> > >
> > > Due to the different PCIe controller have different property, e.g.
> > > PCIe controller1 support multiple function feature, but PCIe
> > > controller2 don't support this feature, so I need to check which
> > > controller support it and return the correct offset value, but each board only
> > have one ls_pcie_ep_drvdata, ^_^.
> >
> > Yes but if they don't support the feature then func_offset will be 0.
> >
> > >
> > > >
> > > > However something to the effect of the following may help spot
> > > > misconfiguration:
> > > >
> > > > WARN_ON(func_no && !pcie->drvdata->func_offset); return
> > > > pcie->drvdata->func_offset * func_no;
> > > >
> > > > The WARN is probably quite useful as if you are attempting to use
> > > > non-zero functions and func_offset isn't set - then things may
> > > > appear to work normally but actually will break horribly.
> > >
> > > As discussion before, I think the func_offset should not depends on
> > > the function number, even if other platforms of NXP may be use write
> > > registers way to access the different function config space.
> >
> > I agree that func_offset is an optional parameter. But if you are attempting to
> > determine the offset of a function and you are given a non-zero function
> > number - then something has gone wrong if func_offset is 0.
>
> I have understood you means, maybe I need to set a flag in the driver_data struct,
> because I may add other platform of NXP, these platform use the write register
> method to access different function, e.g.
> write func_num to register, then we can access this func_num config space.
>
> I will modify the code like this? Do you have better advice?
> Case1:
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> index 004a7e8..8a0d6df 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -23,6 +23,7 @@
> #define to_ls_pcie_ep(x) dev_get_drvdata((x)->dev)
>
> struct ls_pcie_ep_drvdata {
> + u8 func_config_flag;
> u32 func_offset;
> const struct dw_pcie_ep_ops *ops;
> const struct dw_pcie_ops *dw_pcie_ops;
> @@ -97,8 +98,14 @@ static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep *ep,
> * Read the Header Type register of config space to check
> * whether this PCI device support the multiple function.
> */
> - if (header_type & (1 << 7))
> - return pcie->drvdata->func_offset * func_no;
> + if (header_type & (1 << 7)) {
> + if (pcie->drvdata->func_config_flag) {
> + iowrite32((func_num << n), pci->dbi_base + PCI_XXXX_XXX);
> + } else {
> + WARN_ON(func_no && !pcie->drvdata->func_offset);
> + return pcie->drvdata->func_offset * func_no;
> + }
> + }
>
> return 0;
> }
>
> Of course, I don't need to set the flag this time, because I don't use the second method(write
> register method), so the code like this:
> case2:
> +static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep *ep,
> u8 func_no) {
> struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
> u8 header_type;
>
> of course, this code is not requied, due to the
> pcie->drvdata->func_offset is 0, but I think this is more clear
> if use this code.
> header_type = ioread8(pci->dbi_base + PCI_HEADER_TYPE);
>
> /*
> * Read the Header Type register of config space to check
> * whether this PCI device support the multiple function.
> */
> if (header_type & (1 << 7)) {
> WARN_ON(func_no && !pcie->drvdata->func_offset);
> return pcie->drvdata->func_offset * func_no;
> }
>
> return 0;
> }
>
> Or like this:
> Case3:
> +static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep *ep,
> u8 func_no) {
> struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
>
> WARN_ON(func_no && !pcie->drvdata->func_offset);
> return pcie->drvdata->func_offset * func_no;
This is better. Given there is only currently one method of calculating
an offset for layerscape, I'd recommend you add additional methods when
the need arises.
Thanks,
Andrew Murray
>
> }
> Of course, we can return a -1 by adjuring the (func_no && !pcie->drvdata->func_offset)
> Valu in case1
>
> Thanks
> Xiaowei
>
> >
> > Thanks,
> >
> > Andrew Murray
> >
> > >
> > > I have added the comments above the code, as follow, do you have any
> > advice?
> > > +static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep *ep,
> > > + u8 func_no) {
> > > + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > + struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
> > > + u8 header_type;
> > > +
> > > + header_type = ioread8(pci->dbi_base + PCI_HEADER_TYPE);
> > > +
> > > + /*
> > > + * Read the Header Type register of config space to check
> > > + * whether this PCI device support the multiple function.
> > > + */
> > > + if (header_type & (1 << 7))
> > > + return pcie->drvdata->func_offset * func_no;
> > > +
> > > + return 0;
> > > +}
> > >
> > > Thanks a lot for your detail comments.
> > >
> > > >
> > > > Thanks,
> > > >
> > > > Andrew Murray
> > > >
> > > > > +}
> > > > > +
> > > > > +static const struct dw_pcie_ep_ops ls_pcie_ep_ops = {
> > > > > .ep_init = ls_pcie_ep_init,
> > > > > .raise_irq = ls_pcie_ep_raise_irq,
> > > > > .get_features = ls_pcie_ep_get_features,
> > > > > + .func_conf_select = ls_pcie_ep_func_conf_select, };
> > > > > +
> > > > > +static const struct ls_pcie_ep_drvdata ls1_ep_drvdata = {
> > > > > + .ops = &ls_pcie_ep_ops,
> > > > > + .dw_pcie_ops = &dw_ls_pcie_ep_ops, };
> > > > > +
> > > > > +static const struct ls_pcie_ep_drvdata ls2_ep_drvdata = {
> > > > > + .func_offset = 0x20000,
> > > > > + .ops = &ls_pcie_ep_ops,
> > > > > + .dw_pcie_ops = &dw_ls_pcie_ep_ops, };
> > > > > +
> > > > > +static const struct of_device_id ls_pcie_ep_of_match[] = {
> > > > > + { .compatible = "fsl,ls1046a-pcie-ep", .data = &ls1_ep_drvdata },
> > > > > + { .compatible = "fsl,ls1088a-pcie-ep", .data = &ls2_ep_drvdata },
> > > > > + { .compatible = "fsl,ls2088a-pcie-ep", .data = &ls2_ep_drvdata },
> > > > > + { },
> > > > > };
> > > > >
> > > > > static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie, @@
> > > > > -98,7
> > > > > +134,7 @@ static int __init ls_add_pcie_ep(struct ls_pcie_ep
> > > > > +*pcie,
> > > > > int ret;
> > > > >
> > > > > ep = &pci->ep;
> > > > > - ep->ops = &pcie_ep_ops;
> > > > > + ep->ops = pcie->drvdata->ops;
> > > > >
> > > > > res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > > > "addr_space");
> > > > > if (!res)
> > > > > @@ -137,14 +173,11 @@ static int __init ls_pcie_ep_probe(struct
> > > > platform_device *pdev)
> > > > > if (!ls_epc)
> > > > > return -ENOMEM;
> > > > >
> > > > > - dbi_base = platform_get_resource_byname(pdev,
> > IORESOURCE_MEM,
> > > > "regs");
> > > > > - pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> > > > > - if (IS_ERR(pci->dbi_base))
> > > > > - return PTR_ERR(pci->dbi_base);
> > > > > + pcie->drvdata = of_device_get_match_data(dev);
> > > > >
> > > > > - pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> > > > > pci->dev = dev;
> > > > > - pci->ops = &ls_pcie_ep_ops;
> > > > > + pci->ops = pcie->drvdata->dw_pcie_ops;
> > > > > +
> > > > > pcie->pci = pci;
> > > > >
> > > > > ls_epc->linkup_notifier = false, @@ -152,6 +185,13 @@ static int
> > > > > __init ls_pcie_ep_probe(struct platform_device *pdev)
> > > > >
> > > > > pcie->ls_epc = ls_epc;
> > > > >
> > > > > + dbi_base = platform_get_resource_byname(pdev,
> > IORESOURCE_MEM,
> > > > "regs");
> > > > > + pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> > > > > + if (IS_ERR(pci->dbi_base))
> > > > > + return PTR_ERR(pci->dbi_base);
> > > > > +
> > > > > + pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> > > > > +
> > > > > platform_set_drvdata(pdev, pcie);
> > > > >
> > > > > ret = ls_add_pcie_ep(pcie, pdev);
> > > > > --
> > > > > 2.9.5
> > > > >
More information about the Linuxppc-dev
mailing list