[DOC][PATCH v2] powerpc: Provide initial documentation for PAPR hcalls
Vaibhav Jain
vaibhav at linux.ibm.com
Wed Aug 28 18:27:29 AEST 2019
This doc patch provides an initial description of the hcall op-codes
that are used by Linux kernel running as a guest (LPAR) on top of
PowerVM or any other sPAPR compliant hyper-visor (e.g qemu).
Apart from documenting the hcalls the doc-patch also provides a
rudimentary overview of how hcall ABI, how they are issued with the
Linux kernel and how information/control flows between the guest and
hypervisor.
Signed-off-by: Vaibhav Jain <vaibhav at linux.ibm.com>
---
Change-log:
v2:
* Added a section on Register conventions to be followed when invoking
hcalls. [Nick]
* Updated section on HCALL ABI to clarify that byte ordering only
matters to in/out values passed by a memory buffer. [Laurent]
* Updated a code comment in 'exceptions-64s.S' describing hypercall
register conventions to point it to 'papr_hcalls.rst' [Nick]
v1:
Initial version of this doc-patch was posted and reviewed as part of
the patch-series "[PATCH v5 0/4] powerpc/papr_scm: Workaround for
failure of drc bind after kexec"
https://patchwork.ozlabs.org/patch/1136022/. Changes introduced on top
the original patch:
* Replaced the of term PHYP with Hypervisor to indicate both
PowerVM/Qemu [Laurent]
* Emphasized that In/Out arguments to hcalls are in Big-endian format
[Laurent]
* Fixed minor word repetition, spell issues and grammatical error
[Michal, Mpe]
* Replaced various variant of term 'hcall' with a single
variant. [Mpe]
* Changed the documentation format from txt to ReST. [Mpe]
* Changed the name of documentation file to papr_hcalls.rst. [Mpe]
* Updated the section describing privileged operation by hypervisor
to be more accurate [Mpe].
* Fixed up mention of register notation used for describing
hcalls. [Mpe]
* s/NVDimm/NVDIMM [Mpe]
* Added section on return values from hcall [Mpe]
* Described H_CONTINUE return-value for long running hcalls.
---
Documentation/powerpc/papr_hcalls.rst | 248 ++++++++++++++++++++++++++
arch/powerpc/kernel/exceptions-64s.S | 19 +-
2 files changed, 251 insertions(+), 16 deletions(-)
create mode 100644 Documentation/powerpc/papr_hcalls.rst
diff --git a/Documentation/powerpc/papr_hcalls.rst b/Documentation/powerpc/papr_hcalls.rst
new file mode 100644
index 000000000000..4d270c7ae26d
--- /dev/null
+++ b/Documentation/powerpc/papr_hcalls.rst
@@ -0,0 +1,248 @@
+===========================
+Hypercall Op-codes (hcalls)
+===========================
+
+Overview
+=========
+
+Virtualization on 64-bit Power Book3S Platforms is based on the PAPR
+specification [1]_ which describes the run-time environment for a guest
+operating system and how it should interact with the hypervisor for
+privileged operations. Currently there are two PAPR compliant hypervisors:
+
+- **IBM PowerVM (PHYP)**: IBM's proprietary hypervisor that supports AIX,
+ IBM-i and Linux as supported guests (termed as Logical Partitions
+ or LPARS). It supports the full PAPR specification.
+
+- **Qemu/KVM**: Supports PPC64 linux guests running on a PPC64 linux host.
+ Though it only implements a subset of PAPR specification called LoPAPR [2]_.
+
+On PPC64 arch a guest kernel running on top of a PAPR hypervisor is called
+a *pSeries guest*. A pseries guest runs in a supervisor mode (HV=0) and must
+issue hypercalls to the hypervisor whenever it needs to perform an action
+that is hypervisor priviledged [3]_ or for other services managed by the
+hypervisor.
+
+Hence a Hypercall (hcall) is essentially a request by the pseries guest
+asking hypervisor to perform a privileged operation on behalf of the guest. The
+guest issues a with necessary input operands. The hypervisor after performing
+the privilege operation returns a status code and output operands back to the
+guest.
+
+HCALL ABI
+=========
+The ABI specification for a hcall between a pseries guest and PAPR hypervisor
+is covered in section 14.5.3 of ref [2]_. Switch to the Hypervisor context is
+done via the instruction **HVCS** that expects the Opcode for hcall is set in *r3*
+and any in-arguments for the hcall are provided in registers *r4-r12*. If values
+have to be passed through a memory buffer, the data stored in that buffer should be
+in Big-endian byte order.
+
+Once control is returns back to the guest after hypervisor has serviced the
+'HVCS' instruction the return value of the hcall is available in *r3* and any
+out values are returned in registers *r4-r12*. Again like in case of in-arguments,
+any out values stored in a memory buffer will be in Big-endian byte order.
+
+Powerpc arch code provides convenient wrappers named **plpar_hcall_xxx** defined
+in a arch specific header [4]_ to issue hcalls from the linux kernel
+running as pseries guest.
+
+Register Conventions
+====================
+
+Any hcall should follow same register convention as described in section 2.2.1.1
+of "64-Bit ELF V2 ABI Specification: Power Architecture"[5]_. Table below
+summarizes these conventions:
+
++----------+----------+-------------------------------------------+
+| Register |Volatile | Purpose |
+| Range |(Y/N) | |
++==========+==========+===========================================+
+| r0 | Y | Optional-usage |
++----------+----------+-------------------------------------------+
+| r1 | N | Stack Pointer |
++----------+----------+-------------------------------------------+
+| r2 | N | TOC |
++----------+----------+-------------------------------------------+
+| r3 | Y | hcall opcode/return value |
++----------+----------+-------------------------------------------+
+| r4-r10 | Y | in and out values |
++----------+----------+-------------------------------------------+
+| r11 | Y | Optional-usage/Environmental pointer |
++----------+----------+-------------------------------------------+
+| r12 | Y | Optional-usage/Function entry address at |
+| | | global entry point |
++----------+----------+-------------------------------------------+
+| r13 | N | Thread-Pointer |
++----------+----------+-------------------------------------------+
+| r14-r31 | N | Local Variables |
++----------+----------+-------------------------------------------+
+| LR | Y | Link Register |
++----------+----------+-------------------------------------------+
+| CTR | Y | Loop Counter |
++----------+----------+-------------------------------------------+
+| XER | Y | Fixed-point exception register. |
++----------+----------+-------------------------------------------+
+| CR0-1 | Y | Condition register fields. |
++----------+----------+-------------------------------------------+
+| CR2-4 | N | Condition register fields. |
++----------+----------+-------------------------------------------+
+| CR5-7 | Y | Condition register fields. |
++----------+----------+-------------------------------------------+
+| Others | N | |
++----------+----------+-------------------------------------------+
+
+DRC & DRC Indexes
+=================
+::
+
+ DR1 Guest
+ +--+ +------------+ +---------+
+ | | <----> | | | User |
+ +--+ DRC1 | | DRC | Space |
+ | PAPR | Index +---------+
+ DR2 | Hypervisor | | |
+ +--+ | | <-----> | Kernel |
+ | | <----> | | Hcall | |
+ +--+ DRC2 +------------+ +---------+
+
+PAPR hypervisor terms shared hardware resources like PCI devices, NVDIMMs etc
+available for use by LPARs as Dynamic Resource (DR). When a DR is allocated to
+an LPAR, PHYP creates a data-structure called Dynamic Resource Connector (DRC)
+to manage LPAR access. An LPAR refers to a DRC via an opaque 32-bit number
+called DRC-Index. The DRC-index value is provided to the LPAR via device-tree
+where its present as an attribute in the device tree node associated with the
+DR.
+
+HCALL Return-values
+===================
+
+After servicing the hcall, hypervisor sets the return-value in *r3* indicating
+success or failure of the hcall. In case of a failure an error code indicates
+the cause for error. These codes are defined and documented in arch specific
+header [4]_.
+
+In some cases a hcall can potentially take a long time and need to be issued
+multiple times in order to be completely serviced. These hcalls will usually
+accept an opaque value *continue-token* within there argument list and a
+return value of *H_CONTINUE* indicates that hypervisor hasn't still finished
+servicing the hcall yet.
+
+To make such hcalls the guest need to set *continue-token == 0* for the
+initial call and use the hypervisor returned value of *continue-token*
+for each subsequent hcall until hypervisor returns a non *H_CONTINUE*
+return value.
+
+HCALL Op-codes
+==============
+
+Below is a partial list of HCALLs that are supported by PHYP. For the
+corresponding opcode values please look into the arch specific header [4]_:
+
+**H_SCM_READ_METADATA**
+
+| Input: *drcIndex, offset, buffer-address, numBytesToRead*
+| Out: *numBytesRead*
+| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_Hardware*
+
+Given a DRC Index of an NVDIMM, read N-bytes from the the metadata area
+associated with it, at a specified offset and copy it to provided buffer.
+The metadata area stores configuration information such as label information,
+bad-blocks etc. The metadata area is located out-of-band of NVDIMM storage
+area hence a separate access semantics is provided.
+
+**H_SCM_WRITE_METADATA**
+
+| Input: *drcIndex, offset, data, numBytesToWrite*
+| Out: *None*
+| Return Value: *H_Success, H_Parameter, H_P2, H_P4, H_Hardware*
+
+Given a DRC Index of an NVDIMM, write N-bytes to the metadata area
+associated with it, at the specified offset and from the provided buffer.
+
+**H_SCM_BIND_MEM**
+
+| Input: *drcIndex, startingScmBlockIndex, numScmBlocksToBind,*
+| *targetLogicalMemoryAddress, continue-token*
+| Out: *continue-token, targetLogicalMemoryAddress, numScmBlocksToBound*
+| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_P4, H_Overlap,*
+| *H_Too_Big, H_P5, H_Busy*
+
+Given a DRC-Index of an NVDIMM, map a continuous SCM blocks range
+*(startingScmBlockIndex, startingScmBlockIndex+numScmBlocksToBind)* to the guest
+at *targetLogicalMemoryAddress* within guest physical address space. In
+case *targetLogicalMemoryAddress == 0xFFFFFFFF_FFFFFFFF* then hypervisor
+assigns a target address to the guest. The HCALL can fail if the Guest has
+an active PTE entry to the SCM block being bound.
+
+**H_SCM_UNBIND_MEM**
+| Input: drcIndex, startingScmLogicalMemoryAddress, numScmBlocksToUnbind
+| Out: numScmBlocksUnbound
+| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_In_Use, H_Overlap,*
+| *H_Busy, H_LongBusyOrder1mSec, H_LongBusyOrder10mSec*
+
+Given a DRC-Index of an NVDimm, unmap *numScmBlocksToUnbind* SCM blocks starting
+at *startingScmLogicalMemoryAddress* from guest physical address space. The
+HCALL can fail if the Guest has an active PTE entry to the SCM block being
+unbound.
+
+**H_SCM_QUERY_BLOCK_MEM_BINDING**
+
+| Input: *drcIndex, scmBlockIndex*
+| Out: *Guest-Physical-Address*
+| Return Value: *H_Success, H_Parameter, H_P2, H_NotFound*
+
+Given a DRC-Index and an SCM Block index return the guest physical address to
+which the SCM block is mapped to.
+
+**H_SCM_QUERY_LOGICAL_MEM_BINDING**
+
+| Input: *Guest-Physical-Address*
+| Out: *drcIndex, scmBlockIndex*
+| Return Value: *H_Success, H_Parameter, H_P2, H_NotFound*
+
+Given a guest physical address return which DRC Index and SCM block is mapped
+to that address.
+
+**H_SCM_UNBIND_ALL**
+
+| Input: *scmTargetScope, drcIndex*
+| Out: *None*
+| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_In_Use, H_Busy,*
+| *H_LongBusyOrder1mSec, H_LongBusyOrder10mSec*
+
+Depending on the Target scope unmap all SCM blocks belonging to all NVDIMMs
+or all SCM blocks belonging to a single NVDIMM identified by its drcIndex
+from the LPAR memory.
+
+**H_SCM_HEALTH**
+
+| Input: drcIndex
+| Out: *health-bitmap, health-bit-valid-bitmap*
+| Return Value: *H_Success, H_Parameter, H_Hardware*
+
+Given a DRC Index return the info on predictive failure and overall health of
+the NVDIMM. The asserted bits in the health-bitmap indicate a single predictive
+failure and health-bit-valid-bitmap indicate which bits in health-bitmap are
+valid.
+
+**H_SCM_PERFORMANCE_STATS**
+
+| Input: drcIndex, resultBuffer Addr
+| Out: None
+| Return Value: *H_Success, H_Parameter, H_Unsupported, H_Hardware, H_Authority, H_Privilege*
+
+Given a DRC Index collect the performance statistics for NVDIMM and copy them
+to the resultBuffer.
+
+References
+==========
+.. [1] "Power Architecture Platform Reference"
+ https://en.wikipedia.org/wiki/Power_Architecture_Platform_Reference
+.. [2] "Linux on Power Architecture Platform Reference"
+ https://members.openpowerfoundation.org/document/dl/469
+.. [3] "Definitions and Notation" Book III-Section 14.5.3
+ https://openpowerfoundation.org/?resource_lib=power-isa-version-3-0
+.. [4] arch/powerpc/include/asm/hvcall.h
+.. [5] "64-Bit ELF V2 ABI Specification: Power Architecture"
+ https://openpowerfoundation.org/?resource_lib=64-bit-elf-v2-abi-specification-power-architecture
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 6ba3cc2ef8ab..efe5d8b13a2e 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1531,22 +1531,9 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
*
* Call convention:
*
- * syscall register convention is in Documentation/powerpc/syscall64-abi.rst
- *
- * For hypercalls, the register convention is as follows:
- * r0 volatile
- * r1-2 nonvolatile
- * r3 volatile parameter and return value for status
- * r4-r10 volatile input and output value
- * r11 volatile hypercall number and output value
- * r12 volatile input and output value
- * r13-r31 nonvolatile
- * LR nonvolatile
- * CTR volatile
- * XER volatile
- * CR0-1 CR5-7 volatile
- * CR2-4 nonvolatile
- * Other registers nonvolatile
+ * syscall and hypercalls register conventions are documented in
+ * Documentation/powerpc/syscall64-abi.rst and
+ * Documentation/powerpc/papr_hcalls.rst respectively.
*
* The intersection of volatile registers that don't contain possible
* inputs is: cr0, xer, ctr. We may use these as scratch regs upon entry
--
2.21.0
More information about the Linuxppc-dev
mailing list