[PATCH v6 4/5] powerpc/powernv/pci: Hook up the writes to PCI_SECONDARY_BUS register
Sergey Miroshnichenko
s.miroshnichenko at yadro.com
Sat Aug 17 02:16:13 AEST 2019
Writing a new value to the PCI_SECONDARY_BUS register of the bridge means
that its children will become addressable on another address (new B in BDF)
or even un-addressable if the secondary bus is set to zero.
On PowerNV, device PEs are heavily BDF-dependent, so they must be updated
on every such change of its address.
Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko at yadro.com>
---
arch/powerpc/platforms/powernv/pci.c | 118 ++++++++++++++++++++++++++-
1 file changed, 116 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index a5b04410c8b4..e9b4ed0f97a3 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -717,13 +717,127 @@ int pnv_pci_cfg_read(struct pci_dn *pdn,
where, size, val);
}
+static void invalidate_children_pes(struct pci_dn *pdn)
+{
+ struct pnv_phb *phb = pdn->phb->private_data;
+ struct pci_dn *child;
+ bool found_pe = false;
+ int pe_num;
+ int pe_bus;
+
+ list_for_each_entry(child, &pdn->child_list, list) {
+ struct pnv_ioda_pe *pe = (child->pe_number != IODA_INVALID_PE) ?
+ &phb->ioda.pe_array[child->pe_number] :
+ NULL;
+
+ if (!child->busno)
+ continue;
+
+ if ((child->class_code >> 8) == PCI_CLASS_BRIDGE_PCI)
+ invalidate_children_pes(child);
+
+ if (pe) {
+ u8 rid_bus = (pe->rid >> 8) & 0xff;
+
+ if (rid_bus) {
+ pe_num = child->pe_number;
+ pe_bus = rid_bus;
+ found_pe = true;
+ }
+
+ pe->rid &= 0xff;
+ }
+
+ child->busno = 0;
+ }
+
+ if (found_pe) {
+ u16 rid = pe_bus << 8;
+
+ opal_pci_set_pe(phb->opal_id, pe_num, rid, 7, 0, 0, OPAL_UNMAP_PE);
+ }
+}
+
+static u8 pre_hook_new_sec_bus(struct pci_dn *pdn, u8 new_secondary_bus)
+{
+ u32 old_secondary_bus = 0;
+
+ if ((pdn->class_code >> 8) != PCI_CLASS_BRIDGE_PCI)
+ return 0;
+
+ pnv_pci_cfg_read(pdn, PCI_SECONDARY_BUS, 1, &old_secondary_bus);
+ old_secondary_bus &= 0xff;
+
+ if (old_secondary_bus != new_secondary_bus)
+ invalidate_children_pes(pdn);
+
+ return old_secondary_bus;
+}
+
+static void update_children_pes(struct pci_dn *pdn, u8 new_secondary_bus)
+{
+ struct pnv_phb *phb = pdn->phb->private_data;
+ struct pci_dn *child;
+ bool found_pe = false;
+ int pe_num;
+
+ if (!new_secondary_bus)
+ return;
+
+ list_for_each_entry(child, &pdn->child_list, list) {
+ struct pnv_ioda_pe *pe = (child->pe_number != IODA_INVALID_PE) ?
+ &phb->ioda.pe_array[child->pe_number] :
+ NULL;
+
+ if (child->busno)
+ continue;
+
+ child->busno = new_secondary_bus;
+
+ if (pe) {
+ pe->rid |= (child->busno << 8);
+ pe_num = child->pe_number;
+ found_pe = true;
+ }
+ }
+
+ if (found_pe) {
+ u16 rid = new_secondary_bus << 8;
+
+ opal_pci_set_pe(phb->opal_id, pe_num, rid, 7, 0, 0, OPAL_MAP_PE);
+ }
+}
+
+static void post_hook_new_sec_bus(struct pci_dn *pdn, u8 new_secondary_bus)
+{
+ if ((pdn->class_code >> 8) != PCI_CLASS_BRIDGE_PCI)
+ return;
+
+ update_children_pes(pdn, new_secondary_bus);
+}
+
int pnv_pci_cfg_write(struct pci_dn *pdn,
int where, int size, u32 val)
{
struct pnv_phb *phb = pdn->phb->private_data;
+ u8 old_secondary_bus = 0, new_secondary_bus = 0;
+ int rc;
+
+ if (where == PCI_SECONDARY_BUS) {
+ new_secondary_bus = val & 0xff;
+ old_secondary_bus = pre_hook_new_sec_bus(pdn, new_secondary_bus);
+ } else if (where == PCI_PRIMARY_BUS && size > 1) {
+ new_secondary_bus = (val >> 8) & 0xff;
+ old_secondary_bus = pre_hook_new_sec_bus(pdn, new_secondary_bus);
+ }
- return pnv_pci_cfg_write_raw(phb->opal_id, pdn->busno, pdn->devfn,
- where, size, val);
+ rc = pnv_pci_cfg_write_raw(phb->opal_id, pdn->busno, pdn->devfn,
+ where, size, val);
+
+ if (new_secondary_bus && old_secondary_bus != new_secondary_bus)
+ post_hook_new_sec_bus(pdn, new_secondary_bus);
+
+ return rc;
}
#if CONFIG_EEH
--
2.21.0
More information about the Linuxppc-dev
mailing list