[PATCH 3/6] powerpc: Convert flush_icache_range & friends to C

[Alastair D'Silva]

On Thu, 2019-08-15 at 09:29 +0200, christophe leroy wrote:
> 
> Le 15/08/2019 à 06:10, Alastair D'Silva a écrit :
> > From: Alastair D'Silva <alastair at d-silva.org>
> > 
> > Similar to commit 22e9c88d486a
> > ("powerpc/64: reuse PPC32 static inline flush_dcache_range()")
> > this patch converts flush_icache_range() to C, and reimplements the
> > following functions as wrappers around it:
> > __flush_dcache_icache
> > __flush_dcache_icache_phys
> 
> Not sure you can do that for __flush_dcache_icache_phys(), see
> detailed 
> comments below
> 
> > This was done as we discovered a long-standing bug where the length
> > of the
> > range was truncated due to using a 32 bit shift instead of a 64 bit
> > one.
> > 
> > By converting these functions to C, it becomes easier to maintain.
> > 
> > Signed-off-by: Alastair D'Silva <alastair at d-silva.org>
> > ---
> >   arch/powerpc/include/asm/cache.h      |  26 +++---
> >   arch/powerpc/include/asm/cacheflush.h |  32 ++++---
> >   arch/powerpc/kernel/misc_32.S         | 117 -------------------
> > -------
> >   arch/powerpc/kernel/misc_64.S         |  97 ---------------------
> >   arch/powerpc/mm/mem.c                 |  71 +++++++++++++++-
> >   5 files changed, 102 insertions(+), 241 deletions(-)
> > 
> > diff --git a/arch/powerpc/include/asm/cache.h
> > b/arch/powerpc/include/asm/cache.h
> > index f852d5cd746c..728f154204db 100644
> > --- a/arch/powerpc/include/asm/cache.h
> > +++ b/arch/powerpc/include/asm/cache.h
> > @@ -98,20 +98,7 @@ static inline u32 l1_icache_bytes(void)
> >   #endif
> >   #endif /* ! __ASSEMBLY__ */
> >   
> > -#if defined(__ASSEMBLY__)
> > -/*
> > - * For a snooping icache, we still need a dummy icbi to purge all
> > the
> > - * prefetched instructions from the ifetch buffers. We also need a
> > sync
> > - * before the icbi to order the the actual stores to memory that
> > might
> > - * have modified instructions with the icbi.
> > - */
> > -#define PURGE_PREFETCHED_INS	\
> > -	sync;			\
> > -	icbi	0,r3;		\
> > -	sync;			\
> > -	isync
> 
> Is this still used anywhere now ?
No, this patch removes all users of it.

> > -
> > -#else
> > +#if !defined(__ASSEMBLY__)
> >   #define __read_mostly
> > __attribute__((__section__(".data..read_mostly")))
> >   
> >   #ifdef CONFIG_PPC_BOOK3S_32
> > @@ -145,6 +132,17 @@ static inline void dcbst(void *addr)
> >   {
> >   	__asm__ __volatile__ ("dcbst %y0" : : "Z"(*(u8 *)addr) :
> > "memory");
> >   }
> > +
> > +static inline void icbi(void *addr)
> > +{
> > +	__asm__ __volatile__ ("icbi 0, %0" : : "r"(addr) : "memory");
> > +}
> > +
> > +static inline void iccci(void)
> > +{
> > +	__asm__ __volatile__ ("iccci 0, r0");
> 
> I think you need the "memory" clobber too here.
> 
Thanks, I'll add that.

> > +}
> > +
> >   #endif /* !__ASSEMBLY__ */
> >   #endif /* __KERNEL__ */
> >   #endif /* _ASM_POWERPC_CACHE_H */
> > diff --git a/arch/powerpc/include/asm/cacheflush.h
> > b/arch/powerpc/include/asm/cacheflush.h
> > index ed57843ef452..4c3377aff8ed 100644
> > --- a/arch/powerpc/include/asm/cacheflush.h
> > +++ b/arch/powerpc/include/asm/cacheflush.h
> > @@ -42,24 +42,18 @@ extern void flush_dcache_page(struct page
> > *page);
> >   #define flush_dcache_mmap_lock(mapping)		do { } while
> > (0)
> >   #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
> >   
> > -extern void flush_icache_range(unsigned long, unsigned long);
> > +void flush_icache_range(unsigned long start, unsigned long stop);
> >   extern void flush_icache_user_range(struct vm_area_struct *vma,
> >   				    struct page *page, unsigned long
> > addr,
> >   				    int len);
> > -extern void __flush_dcache_icache(void *page_va);
> >   extern void flush_dcache_icache_page(struct page *page);
> > -#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE)
> > -extern void __flush_dcache_icache_phys(unsigned long physaddr);
> > -#else
> > -static inline void __flush_dcache_icache_phys(unsigned long
> > physaddr)
> > -{
> > -	BUG();
> > -}
> > -#endif
> >   
> > -/*
> > - * Write any modified data cache blocks out to memory and
> > invalidate them.
> > +/**
> > + * flush_dcache_range(): Write any modified data cache blocks out
> > to memory and invalidate them.
> >    * Does not invalidate the corresponding instruction cache
> > blocks.
> > + *
> > + * @start: the start address
> > + * @stop: the stop address (exclusive)
> >    */
> >   static inline void flush_dcache_range(unsigned long start,
> > unsigned long stop)
> >   {
> > @@ -82,6 +76,20 @@ static inline void flush_dcache_range(unsigned
> > long start, unsigned long stop)
> >   		isync();
> >   }
> >   
> > +/**
> > + * __flush_dcache_icache(): Flush a particular page from the data
> > cache to RAM.
> > + * Note: this is necessary because the instruction cache does
> > *not*
> > + * snoop from the data cache.
> > + *
> > + * @page: the address of the page to flush
> > + */
> > +static inline void __flush_dcache_icache(void *page)
> > +{
> > +	unsigned long page_addr = (unsigned long)page;
> 
> The function is small enough to call this addr instead of page_addr 
> without ambiguity.
Ok

> 
> > +
> > +	flush_icache_range(page_addr, page_addr + PAGE_SIZE);
> 
> Finally, I think that's not so simple. For the 44x, if
> MMU_FTR_TYPE_44x 
> is set, that's just a clean_dcache_range().
> If that feature is not set, it looks like a standard 
> flush_icache_range() but without the special CONFIG_4xx handling
> with 
> iccci we have in flush_icache_range()
> 
Hmm, I'll have to hack at this a bit more.

<snip>
-- 
Alastair D'Silva
Open Source Developer
Linux Technology Centre, IBM Australia
mob: 0423 762 819