[PATCH v4 9/9] powerpc/eeh: Convert log messages to eeh_edev_* macros
Sam Bobroff
sbobroff at linux.ibm.com
Wed Aug 7 13:44:42 AEST 2019
Convert existing messages, where appropriate, to use the eeh_edev_*
logging macros.
The only effect should be minor adjustments to the log messages, apart
from:
- A new message in pseries_eeh_probe() "Probing device" to match the
powernv case.
- The "Probing device" message in pnv_eeh_probe() is now generated
slightly later, which will mean that it is no longer emitted for
devices that aren't probed due to the initial checks.
Signed-off-by: Sam Bobroff <sbobroff at linux.ibm.com>
---
v4 - Fixed compile warning when compiling without CONFIG_IOV.
arch/powerpc/include/asm/ppc-pci.h | 5 --
arch/powerpc/kernel/eeh.c | 19 +++-----
arch/powerpc/kernel/eeh_cache.c | 8 +--
arch/powerpc/kernel/eeh_driver.c | 7 +--
arch/powerpc/kernel/eeh_pe.c | 51 +++++---------------
arch/powerpc/platforms/powernv/eeh-powernv.c | 17 ++-----
arch/powerpc/platforms/pseries/eeh_pseries.c | 21 +++-----
7 files changed, 39 insertions(+), 89 deletions(-)
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 72860de205a0..7f4be5a05eb3 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -62,11 +62,6 @@ void eeh_pe_dev_mode_mark(struct eeh_pe *pe, int mode);
void eeh_sysfs_add_device(struct pci_dev *pdev);
void eeh_sysfs_remove_device(struct pci_dev *pdev);
-static inline const char *eeh_pci_name(struct pci_dev *pdev)
-{
- return pdev ? pci_name(pdev) : "<null>";
-}
-
static inline const char *eeh_driver_name(struct pci_dev *pdev)
{
return (pdev && pdev->driver) ? pdev->driver->name : "<null>";
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index c0ec1b6b1e69..b6683f367f7f 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -461,8 +461,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
/* Access to IO BARs might get this far and still not want checking. */
if (!pe) {
eeh_stats.ignored_check++;
- pr_debug("EEH: Ignored check for %s\n",
- eeh_pci_name(dev));
+ eeh_edev_dbg(edev, "Ignored check\n");
return 0;
}
@@ -502,12 +501,11 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
if (dn)
location = of_get_property(dn, "ibm,loc-code",
NULL);
- printk(KERN_ERR "EEH: %d reads ignored for recovering device at "
- "location=%s driver=%s pci addr=%s\n",
+ eeh_edev_err(edev, "%d reads ignored for recovering device at location=%s driver=%s\n",
pe->check_count,
location ? location : "unknown",
- eeh_driver_name(dev), eeh_pci_name(dev));
- printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n",
+ eeh_driver_name(dev));
+ eeh_edev_err(edev, "Might be infinite loop in %s driver\n",
eeh_driver_name(dev));
dump_stack();
}
@@ -1268,12 +1266,11 @@ void eeh_add_device_late(struct pci_dev *dev)
if (!dev)
return;
- pr_debug("EEH: Adding device %s\n", pci_name(dev));
-
pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
edev = pdn_to_eeh_dev(pdn);
+ eeh_edev_dbg(edev, "Adding device\n");
if (edev->pdev == dev) {
- pr_debug("EEH: Device %s already referenced!\n", pci_name(dev));
+ eeh_edev_dbg(edev, "Device already referenced!\n");
return;
}
@@ -1374,10 +1371,10 @@ void eeh_remove_device(struct pci_dev *dev)
edev = pci_dev_to_eeh_dev(dev);
/* Unregister the device with the EEH/PCI address search system */
- pr_debug("EEH: Removing device %s\n", pci_name(dev));
+ dev_dbg(&dev->dev, "EEH: Removing device\n");
if (!edev || !edev->pdev || !edev->pe) {
- pr_debug("EEH: Not referenced !\n");
+ dev_dbg(&dev->dev, "EEH: Device not referenced!\n");
return;
}
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
index 8c8649172e97..45360b9eab90 100644
--- a/arch/powerpc/kernel/eeh_cache.c
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -145,8 +145,8 @@ eeh_addr_cache_insert(struct pci_dev *dev, resource_size_t alo,
piar->pcidev = dev;
piar->flags = flags;
- pr_debug("PIAR: insert range=[%pap:%pap] dev=%s\n",
- &alo, &ahi, pci_name(dev));
+ eeh_edev_dbg(piar->edev, "PIAR: insert range=[%pap:%pap]\n",
+ &alo, &ahi);
rb_link_node(&piar->rb_node, parent, p);
rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root);
@@ -226,8 +226,8 @@ static inline void __eeh_addr_cache_rmv_dev(struct pci_dev *dev)
piar = rb_entry(n, struct pci_io_addr_range, rb_node);
if (piar->pcidev == dev) {
- pr_debug("PIAR: remove range=[%pap:%pap] dev=%s\n",
- &piar->addr_lo, &piar->addr_hi, pci_name(dev));
+ eeh_edev_dbg(piar->edev, "PIAR: remove range=[%pap:%pap]\n",
+ &piar->addr_lo, &piar->addr_hi);
rb_erase(n, &pci_io_addr_cache_root.rb_root);
kfree(piar);
goto restart;
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 29424d5e5fea..670b6159cef1 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -457,12 +457,9 @@ static void *eeh_add_virt_device(struct eeh_dev *edev)
{
struct pci_driver *driver;
struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
- struct pci_dn *pdn = eeh_dev_to_pdn(edev);
if (!(edev->physfn)) {
- pr_warn("%s: EEH dev %04x:%02x:%02x.%01x not for VF\n",
- __func__, pdn->phb->global_number, pdn->busno,
- PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
+ eeh_edev_warn(edev, "Not for VF\n");
return NULL;
}
@@ -476,7 +473,7 @@ static void *eeh_add_virt_device(struct eeh_dev *edev)
}
#ifdef CONFIG_PCI_IOV
- pci_iov_add_virtfn(edev->physfn, pdn->vf_index);
+ pci_iov_add_virtfn(edev->physfn, eeh_dev_to_pdn(edev)->vf_index);
#endif
return NULL;
}
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 854cef7b18f4..317a31624526 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -379,8 +379,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
/* Check if the PE number is valid */
if (!eeh_has_flag(EEH_VALID_PE_ZERO) && !edev->pe_config_addr) {
- pr_err("%s: Invalid PE#0 for edev 0x%x on PHB#%x\n",
- __func__, config_addr, pdn->phb->global_number);
+ eeh_edev_err(edev, "PE#0 is invalid for this PHB!\n");
return -EINVAL;
}
@@ -398,12 +397,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
/* Put the edev to PE */
list_add_tail(&edev->entry, &pe->edevs);
- pr_debug("EEH: Add %04x:%02x:%02x.%01x to Bus PE#%x\n",
- pdn->phb->global_number,
- pdn->busno,
- PCI_SLOT(pdn->devfn),
- PCI_FUNC(pdn->devfn),
- pe->addr);
+ eeh_edev_dbg(edev, "Added to bus PE\n");
return 0;
} else if (pe && (pe->type & EEH_PE_INVALID)) {
list_add_tail(&edev->entry, &pe->edevs);
@@ -420,13 +414,8 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
parent = parent->parent;
}
- pr_debug("EEH: Add %04x:%02x:%02x.%01x to Device "
- "PE#%x, Parent PE#%x\n",
- pdn->phb->global_number,
- pdn->busno,
- PCI_SLOT(pdn->devfn),
- PCI_FUNC(pdn->devfn),
- pe->addr, pe->parent->addr);
+ eeh_edev_dbg(edev, "Added to device PE (parent: PE#%x)\n",
+ pe->parent->addr);
return 0;
}
@@ -468,13 +457,8 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
list_add_tail(&pe->child, &parent->child_list);
list_add_tail(&edev->entry, &pe->edevs);
edev->pe = pe;
- pr_debug("EEH: Add %04x:%02x:%02x.%01x to "
- "Device PE#%x, Parent PE#%x\n",
- pdn->phb->global_number,
- pdn->busno,
- PCI_SLOT(pdn->devfn),
- PCI_FUNC(pdn->devfn),
- pe->addr, pe->parent->addr);
+ eeh_edev_dbg(edev, "Added to device PE (parent: PE#%x)\n",
+ pe->parent->addr);
return 0;
}
@@ -492,15 +476,10 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
{
struct eeh_pe *pe, *parent, *child;
int cnt;
- struct pci_dn *pdn = eeh_dev_to_pdn(edev);
pe = eeh_dev_to_pe(edev);
if (!pe) {
- pr_debug("%s: No PE found for device %04x:%02x:%02x.%01x\n",
- __func__, pdn->phb->global_number,
- pdn->busno,
- PCI_SLOT(pdn->devfn),
- PCI_FUNC(pdn->devfn));
+ eeh_edev_dbg(edev, "No PE found for device.\n");
return -EEXIST;
}
@@ -717,17 +696,13 @@ static void eeh_bridge_check_link(struct eeh_dev *edev)
if (!(edev->mode & (EEH_DEV_ROOT_PORT | EEH_DEV_DS_PORT)))
return;
- pr_debug("%s: Check PCIe link for %04x:%02x:%02x.%01x ...\n",
- __func__, pdn->phb->global_number,
- pdn->busno,
- PCI_SLOT(pdn->devfn),
- PCI_FUNC(pdn->devfn));
+ eeh_edev_dbg(edev, "Checking PCIe link...\n");
/* Check slot status */
cap = edev->pcie_cap;
eeh_ops->read_config(pdn, cap + PCI_EXP_SLTSTA, 2, &val);
if (!(val & PCI_EXP_SLTSTA_PDS)) {
- pr_debug(" No card in the slot (0x%04x) !\n", val);
+ eeh_edev_dbg(edev, "No card in the slot (0x%04x) !\n", val);
return;
}
@@ -736,7 +711,7 @@ static void eeh_bridge_check_link(struct eeh_dev *edev)
if (val & PCI_EXP_SLTCAP_PCP) {
eeh_ops->read_config(pdn, cap + PCI_EXP_SLTCTL, 2, &val);
if (val & PCI_EXP_SLTCTL_PCC) {
- pr_debug(" In power-off state, power it on ...\n");
+ eeh_edev_dbg(edev, "In power-off state, power it on ...\n");
val &= ~(PCI_EXP_SLTCTL_PCC | PCI_EXP_SLTCTL_PIC);
val |= (0x0100 & PCI_EXP_SLTCTL_PIC);
eeh_ops->write_config(pdn, cap + PCI_EXP_SLTCTL, 2, val);
@@ -752,7 +727,7 @@ static void eeh_bridge_check_link(struct eeh_dev *edev)
/* Check link */
eeh_ops->read_config(pdn, cap + PCI_EXP_LNKCAP, 4, &val);
if (!(val & PCI_EXP_LNKCAP_DLLLARC)) {
- pr_debug(" No link reporting capability (0x%08x) \n", val);
+ eeh_edev_dbg(edev, "No link reporting capability (0x%08x) \n", val);
msleep(1000);
return;
}
@@ -769,10 +744,10 @@ static void eeh_bridge_check_link(struct eeh_dev *edev)
}
if (val & PCI_EXP_LNKSTA_DLLLA)
- pr_debug(" Link up (%s)\n",
+ eeh_edev_dbg(edev, "Link up (%s)\n",
(val & PCI_EXP_LNKSTA_CLS_2_5GB) ? "2.5GB" : "5GB");
else
- pr_debug(" Link not ready (0x%04x)\n", val);
+ eeh_edev_dbg(edev, "Link not ready (0x%04x)\n", val);
}
#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 7ee0df9ba2c8..43c3b7d81794 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -46,7 +46,7 @@ void pnv_pcibios_bus_add_device(struct pci_dev *pdev)
if (eeh_has_flag(EEH_FORCE_DISABLED))
return;
- pr_debug("%s: EEH: Setting up device %s.\n", __func__, pci_name(pdev));
+ dev_dbg(&pdev->dev, "EEH: Setting up device\n");
eeh_add_device_early(pdn);
eeh_add_device_late(pdev);
eeh_sysfs_add_device(pdev);
@@ -399,10 +399,6 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
int ret;
int config_addr = (pdn->busno << 8) | (pdn->devfn);
- pr_debug("%s: probing %04x:%02x:%02x.%01x\n",
- __func__, hose->global_number, pdn->busno,
- PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
-
/*
* When probing the root bridge, which doesn't have any
* subordinate PCI devices. We don't have OF node for
@@ -416,6 +412,8 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
return NULL;
+ eeh_edev_dbg(edev, "Probing device\n");
+
/* Initialize eeh device */
edev->class_code = pdn->class_code;
edev->mode &= 0xFFFFFF00;
@@ -441,9 +439,7 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
/* Create PE */
ret = eeh_add_to_parent_pe(edev);
if (ret) {
- pr_warn("%s: Can't add PCI dev %04x:%02x:%02x.%01x to parent PE (%x)\n",
- __func__, hose->global_number, pdn->busno,
- PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn), ret);
+ eeh_edev_warn(edev, "Failed to add device to PE (code %d)\n", ret);
return NULL;
}
@@ -501,10 +497,7 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
/* Save memory bars */
eeh_save_bars(edev);
- pr_debug("%s: EEH enabled on %02x:%02x.%01x PHB#%x-PE#%x\n",
- __func__, pdn->busno, PCI_SLOT(pdn->devfn),
- PCI_FUNC(pdn->devfn), edev->pe->phb->global_number,
- edev->pe->addr);
+ eeh_edev_dbg(edev, "EEH enabled on device\n");
return NULL;
}
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 96ad41fbf96b..517982197451 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -49,7 +49,7 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
if (eeh_has_flag(EEH_FORCE_DISABLED))
return;
- pr_debug("%s: EEH: Setting up device %s.\n", __func__, pci_name(pdev));
+ dev_dbg(&pdev->dev, "EEH: Setting up device\n");
#ifdef CONFIG_PCI_IOV
if (pdev->is_virtfn) {
struct pci_dn *physfn_pdn;
@@ -238,10 +238,6 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
int enable = 0;
int ret;
- pr_debug("%s: probing %04x:%02x:%02x.%01x\n",
- __func__, pdn->phb->global_number, pdn->busno,
- PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
-
/* Retrieve OF node and eeh device */
edev = pdn_to_eeh_dev(pdn);
if (!edev || edev->pe)
@@ -255,6 +251,8 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
return NULL;
+ eeh_edev_dbg(edev, "Probing device\n");
+
/*
* Update class code and mode of eeh device. We need
* correctly reflects that current device is root port
@@ -284,12 +282,10 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
pe.config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
/* Enable EEH on the device */
+ eeh_edev_dbg(edev, "Enabling EEH on device\n");
ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
if (ret) {
- pr_debug("%s: EEH failed to enable on %02x:%02x.%01x PHB#%x-PE#%x (code %d)\n",
- __func__, pdn->busno, PCI_SLOT(pdn->devfn),
- PCI_FUNC(pdn->devfn), pe.phb->global_number,
- pe.addr, ret);
+ eeh_edev_dbg(edev, "EEH failed to enable on device (code %d)\n", ret);
} else {
/* Retrieve PE address */
edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
@@ -314,11 +310,8 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
edev->pe_config_addr = pdn_to_eeh_dev(pdn->parent)->pe_config_addr;
eeh_add_to_parent_pe(edev);
}
- pr_debug("%s: EEH %s on %02x:%02x.%01x PHB#%x-PE#%x (code %d)\n",
- __func__, (enable ? "enabled" : "unsupported"),
- pdn->busno, PCI_SLOT(pdn->devfn),
- PCI_FUNC(pdn->devfn), pe.phb->global_number,
- pe.addr, ret);
+ eeh_edev_dbg(edev, "EEH is %s on device (code %d)\n",
+ (enable ? "enabled" : "unsupported"), ret);
}
/* Save memory bars */
--
2.22.0.216.g00a2a96fc9
More information about the Linuxppc-dev
mailing list