[PATCH 3/8] powerpc/eeh: Convert PNV_PHB_FLAG_EEH to global flag

Sam Bobroff sbobroff at linux.ibm.com
Tue Apr 30 15:30:33 AEST 2019


On Thu, Apr 18, 2019 at 07:51:40PM +1000, Oliver O'Halloran wrote:
> On Wed, 2019-03-20 at 13:58 +1100, Sam Bobroff wrote:
> > The PHB flag, PNV_PHB_FLAG_EEH, is set (on PowerNV) individually on
> > each PHB once the EEH subsystem is ready. It is the only use of the
> > flags member of the phb struct.
> > 
> > However there is no need to store this separately on each PHB, so
> > convert it to a global flag. For symmetry, the flag is now also set
> > for pSeries; although it is currently unused it may be useful in the
> > future.
> 
> I'd drop this patch and keep it as a seperate flag. Making this a
> global flag doesn't really buy us anything either. It's also worth
> remembering that we do have virtual PHBs, like the NVLink ones, that
> don't have real EEH support and we should be doing something more
> intelligent about that.
> 
> If you are going to remove the PNV_PHB flag then i would look at moving
> that flag into the generic pci_controller structure that we use for
> tracking PHBs since that would give us a way to toggle EEH support on a
> per PHB basis on pseries and powernv.

OK. I want to keep these changes as small as possible, so I'll try a
simpler approach and use the exsiting flag. (I only touched this area
because it's now necessary to set the EEH_ENABLED flag both at boot time
and after it.)

> > Signed-off-by: Sam Bobroff <sbobroff at linux.ibm.com>
> > ---
> >  arch/powerpc/include/asm/eeh.h               | 11 +++++++++++
> >  arch/powerpc/platforms/powernv/eeh-powernv.c | 14 +++-----------
> >  arch/powerpc/platforms/powernv/pci.c         |  7 +++----
> >  arch/powerpc/platforms/powernv/pci.h         |  2 --
> >  arch/powerpc/platforms/pseries/pci.c         |  4 ++++
> >  5 files changed, 21 insertions(+), 17 deletions(-)
> > 
> > diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
> > index 3613a56281f2..fe4cf7208890 100644
> > --- a/arch/powerpc/include/asm/eeh.h
> > +++ b/arch/powerpc/include/asm/eeh.h
> > @@ -43,6 +43,7 @@ struct pci_dn;
> >  #define EEH_VALID_PE_ZERO	0x10	/* PE#0 is valid		     */
> >  #define EEH_ENABLE_IO_FOR_LOG	0x20	/* Enable IO for log		     */
> >  #define EEH_EARLY_DUMP_LOG	0x40	/* Dump log immediately		     */
> > +#define EEH_PHB_ENABLED		0x80	/* PHB recovery uses EEH	     */
> >  
> >  /*
> >   * Delay for PE reset, all in ms
> > @@ -245,6 +246,11 @@ static inline bool eeh_enabled(void)
> >  	return eeh_has_flag(EEH_ENABLED) && !eeh_has_flag(EEH_FORCE_DISABLED);
> >  }
> >  
> > +static inline bool eeh_phb_enabled(void)
> > +{
> > +	return eeh_has_flag(EEH_PHB_ENABLED);
> > +}
> > +
> >  static inline void eeh_serialize_lock(unsigned long *flags)
> >  {
> >  	raw_spin_lock_irqsave(&confirm_error_lock, *flags);
> > @@ -332,6 +338,11 @@ static inline bool eeh_enabled(void)
> >          return false;
> >  }
> >  
> > +static inline bool eeh_phb_enabled(void)
> > +{
> > +	return false;
> > +}
> > +
> >  static inline void eeh_probe_devices(void) { }
> >  
> >  static inline void *eeh_dev_init(struct pci_dn *pdn, void *data)
> > diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
> > index 6fc1a463b796..f0a95f663810 100644
> > --- a/arch/powerpc/platforms/powernv/eeh-powernv.c
> > +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
> > @@ -264,22 +264,14 @@ int pnv_eeh_post_init(void)
> >  		return ret;
> >  	}
> >  
> > -	if (!eeh_enabled())
> > +	if (eeh_enabled())
> > +		eeh_add_flag(EEH_PHB_ENABLED);
> > +	else
> >  		disable_irq(eeh_event_irq);
> >  
> >  	list_for_each_entry(hose, &hose_list, list_node) {
> >  		phb = hose->private_data;
> >  
> > -		/*
> > -		 * If EEH is enabled, we're going to rely on that.
> > -		 * Otherwise, we restore to conventional mechanism
> > -		 * to clear frozen PE during PCI config access.
> > -		 */
> > -		if (eeh_enabled())
> > -			phb->flags |= PNV_PHB_FLAG_EEH;
> > -		else
> > -			phb->flags &= ~PNV_PHB_FLAG_EEH;
> > -
> >  		/* Create debugfs entries */
> >  #ifdef CONFIG_DEBUG_FS
> >  		if (phb->has_dbgfs || !phb->dbgfs)
> > diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
> > index 307181fd8a17..d2b50f3bf6b1 100644
> > --- a/arch/powerpc/platforms/powernv/pci.c
> > +++ b/arch/powerpc/platforms/powernv/pci.c
> > @@ -717,10 +717,9 @@ int pnv_pci_cfg_write(struct pci_dn *pdn,
> >  static bool pnv_pci_cfg_check(struct pci_dn *pdn)
> >  {
> >  	struct eeh_dev *edev = NULL;
> > -	struct pnv_phb *phb = pdn->phb->private_data;
> >  
> >  	/* EEH not enabled ? */
> > -	if (!(phb->flags & PNV_PHB_FLAG_EEH))
> > +	if (!eeh_phb_enabled())
> >  		return true;
> >  
> >  	/* PE reset or device removed ? */
> > @@ -761,7 +760,7 @@ static int pnv_pci_read_config(struct pci_bus *bus,
> >  
> >  	ret = pnv_pci_cfg_read(pdn, where, size, val);
> >  	phb = pdn->phb->private_data;
> > -	if (phb->flags & PNV_PHB_FLAG_EEH && pdn->edev) {
> > +	if (eeh_phb_enabled() && pdn->edev) {
> >  		if (*val == EEH_IO_ERROR_VALUE(size) &&
> >  		    eeh_dev_check_failure(pdn->edev))
> >                          return PCIBIOS_DEVICE_NOT_FOUND;
> > @@ -789,7 +788,7 @@ static int pnv_pci_write_config(struct pci_bus *bus,
> >  
> >  	ret = pnv_pci_cfg_write(pdn, where, size, val);
> >  	phb = pdn->phb->private_data;
> > -	if (!(phb->flags & PNV_PHB_FLAG_EEH))
> > +	if (!eeh_phb_enabled())
> >  		pnv_pci_config_check_eeh(pdn);
> >  
> >  	return ret;
> > diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
> > index 8e36da379252..eb0add61397b 100644
> > --- a/arch/powerpc/platforms/powernv/pci.h
> > +++ b/arch/powerpc/platforms/powernv/pci.h
> > @@ -85,8 +85,6 @@ struct pnv_ioda_pe {
> >  	struct list_head	list;
> >  };
> >  
> > -#define PNV_PHB_FLAG_EEH	(1 << 0)
> > -
> >  struct pnv_phb {
> >  	struct pci_controller	*hose;
> >  	enum pnv_phb_type	type;
> > diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
> > index 37a77e57893e..7be80882c08d 100644
> > --- a/arch/powerpc/platforms/pseries/pci.c
> > +++ b/arch/powerpc/platforms/pseries/pci.c
> > @@ -244,6 +244,10 @@ void __init pSeries_final_fixup(void)
> >  
> >  	eeh_probe_devices();
> >  	eeh_addr_cache_build();
> > +#ifdef CONFIG_EEH
> > +	if (eeh_enabled())
> > +		eeh_add_flag(EEH_PHB_ENABLED);
> > +#endif
> >  
> >  #ifdef CONFIG_PCI_IOV
> >  	ppc_md.pcibios_sriov_enable = pseries_pcibios_sriov_enable;
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20190430/4a52e6c0/attachment.sig>


More information about the Linuxppc-dev mailing list