[PATCH 31/41] drivers: tty: serial: ioc4_serial: use pr_*() instead of printk()
Enrico Weigelt, metux IT consult
info at metux.net
Sat Apr 27 22:52:12 AEST 2019
This fixes a bunch of checkpatch warnings:
WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
#930: FILE: drivers/tty/serial/ioc4_serial.c:930:
+ printk(KERN_ERR
WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
#945: FILE: drivers/tty/serial/ioc4_serial.c:945:
+ printk(KERN_ERR
WARNING: printk() should include KERN_<LEVEL> facility level
#1028: FILE: drivers/tty/serial/ioc4_serial.c:1028:
+ printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x "
WARNING: space prohibited between function name and open parenthesis '('
#1028: FILE: drivers/tty/serial/ioc4_serial.c:1028:
+ printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x "
WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
#1064: FILE: drivers/tty/serial/ioc4_serial.c:1064:
+ printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid);
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
#1066: FILE: drivers/tty/serial/ioc4_serial.c:1066:
+ printk(KERN_WARNING
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
#1080: FILE: drivers/tty/serial/ioc4_serial.c:1080:
+ printk(KERN_WARNING
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
#1870: FILE: drivers/tty/serial/ioc4_serial.c:1870:
+ printk(KERN_WARNING "IOC4 serial: "
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
#2170: FILE: drivers/tty/serial/ioc4_serial.c:2170:
+ printk(KERN_WARNING "IOC4 serial: "
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
#2796: FILE: drivers/tty/serial/ioc4_serial.c:2796:
+ printk(KERN_WARNING
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
#2804: FILE: drivers/tty/serial/ioc4_serial.c:2804:
+ printk(KERN_WARNING
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
#2818: FILE: drivers/tty/serial/ioc4_serial.c:2818:
+ printk(KERN_WARNING "ioc4_attach_one"
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
#2828: FILE: drivers/tty/serial/ioc4_serial.c:2828:
+ printk(KERN_WARNING
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
#2861: FILE: drivers/tty/serial/ioc4_serial.c:2861:
+ printk(KERN_WARNING
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
#2917: FILE: drivers/tty/serial/ioc4_serial.c:2917:
+ printk(KERN_WARNING
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
#2923: FILE: drivers/tty/serial/ioc4_serial.c:2923:
+ printk(KERN_WARNING
Signed-off-by: Enrico Weigelt <info at metux.net>
---
drivers/tty/serial/ioc4_serial.c | 39 +++++++++++++++------------------------
1 file changed, 15 insertions(+), 24 deletions(-)
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c
index 21c1b8f..4ab67f1 100644
--- a/drivers/tty/serial/ioc4_serial.c
+++ b/drivers/tty/serial/ioc4_serial.c
@@ -927,8 +927,7 @@ static void handle_dma_error_intr(void *arg, uint32_t other_ir)
writel(hooks->intr_dma_error, &port->ip_mem->other_ir.raw);
if (readl(&port->ip_mem->pci_err_addr_l.raw) & IOC4_PCI_ERR_ADDR_VLD) {
- printk(KERN_ERR
- "PCI error address is 0x%llx, "
+ pr_err("PCI error address is 0x%llx, "
"master is serial port %c %s\n",
(((uint64_t)readl(&port->ip_mem->pci_err_addr_h)
<< 32)
@@ -942,8 +941,7 @@ static void handle_dma_error_intr(void *arg, uint32_t other_ir)
if (readl(&port->ip_mem->pci_err_addr_l.raw)
& IOC4_PCI_ERR_ADDR_MUL_ERR) {
- printk(KERN_ERR
- "Multiple errors occurred\n");
+ pr_err("Multiple errors occurred\n");
}
}
spin_unlock_irqrestore(&port->ip_lock, flags);
@@ -1025,7 +1023,7 @@ static irqreturn_t ioc4_intr(int irq, void *arg)
unsigned long flag;
spin_lock_irqsave(&soft->is_ir_lock, flag);
- printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x "
+ pr_debug("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x "
"other_ir 0x%x other_ies 0x%x mask 0x%x\n",
__func__, __LINE__,
(void *)mem, readl(&mem->sio_ir.raw),
@@ -1061,9 +1059,9 @@ static inline int ioc4_attach_local(struct ioc4_driver_data *idd)
/* IOC4 firmware must be at least rev 62 */
pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid);
- printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid);
+ pr_info("IOC4 firmware revision %d\n", ioc4_revid);
if (ioc4_revid < ioc4_revid_min) {
- printk(KERN_WARNING
+ pr_warn(
"IOC4 serial not supported on firmware rev %d, "
"please upgrade to rev %d or higher\n",
ioc4_revid, ioc4_revid_min);
@@ -1077,8 +1075,7 @@ static inline int ioc4_attach_local(struct ioc4_driver_data *idd)
port_number++) {
port = kzalloc(sizeof(struct ioc4_port), GFP_KERNEL);
if (!port) {
- printk(KERN_WARNING
- "IOC4 serial memory not available for port\n");
+ pr_warn("IOC4 serial memory not available for port\n");
goto free;
}
spin_lock_init(&port->ip_lock);
@@ -1867,7 +1864,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
uint32_t shadow;
if ( loop_counter-- <= 0 ) {
- printk(KERN_WARNING "IOC4 serial: "
+ pr_warn("IOC4 serial: "
"possible hang condition/"
"port stuck on interrupt.\n");
break;
@@ -2167,7 +2164,7 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf,
entry = (struct ring_entry *)((caddr_t)inring + cons_ptr);
if ( loop_counter-- <= 0 ) {
- printk(KERN_WARNING "IOC4 serial: "
+ pr_warn("IOC4 serial: "
"possible hang condition/"
"port stuck on read.\n");
break;
@@ -2793,16 +2790,14 @@ static int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
if (!request_mem_region(tmp_addr1, sizeof(struct ioc4_serial),
"sioc4_uart")) {
- printk(KERN_WARNING
- "ioc4 (%p): unable to get request region for "
+ pr_warn("ioc4 (%p): unable to get request region for "
"uart space\n", (void *)idd->idd_pdev);
ret = -ENODEV;
goto out1;
}
serial = ioremap(tmp_addr1, sizeof(struct ioc4_serial));
if (!serial) {
- printk(KERN_WARNING
- "ioc4 (%p) : unable to remap ioc4 serial register\n",
+ pr_warn("ioc4 (%p) : unable to remap ioc4 serial register\n",
(void *)idd->idd_pdev);
ret = -ENODEV;
goto out2;
@@ -2815,7 +2810,7 @@ static int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
control = kzalloc(sizeof(struct ioc4_control), GFP_KERNEL);
if (!control) {
- printk(KERN_WARNING "ioc4_attach_one"
+ pr_warn("ioc4_attach_one"
": unable to get memory for the IOC4\n");
ret = -ENOMEM;
goto out2;
@@ -2825,8 +2820,7 @@ static int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
/* Allocate the soft structure */
soft = kzalloc(sizeof(struct ioc4_soft), GFP_KERNEL);
if (!soft) {
- printk(KERN_WARNING
- "ioc4 (%p): unable to get memory for the soft struct\n",
+ pr_warn("ioc4 (%p): unable to get memory for the soft struct\n",
(void *)idd->idd_pdev);
ret = -ENOMEM;
goto out3;
@@ -2858,8 +2852,7 @@ static int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
"sgi-ioc4serial", soft)) {
control->ic_irq = idd->idd_pdev->irq;
} else {
- printk(KERN_WARNING
- "%s : request_irq fails for IRQ 0x%x\n ",
+ pr_warn("%s : request_irq fails for IRQ 0x%x\n ",
__func__, idd->idd_pdev->irq);
}
ret = ioc4_attach_local(idd);
@@ -2914,14 +2907,12 @@ static int __init ioc4_serial_init(void)
/* register with serial core */
if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) {
- printk(KERN_WARNING
- "%s: Couldn't register rs232 IOC4 serial driver\n",
+ pr_warn("%s: Couldn't register rs232 IOC4 serial driver\n",
__func__);
goto out;
}
if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) {
- printk(KERN_WARNING
- "%s: Couldn't register rs422 IOC4 serial driver\n",
+ pr_warn("%s: Couldn't register rs422 IOC4 serial driver\n",
__func__);
goto out_uart_rs232;
}
--
1.9.1
More information about the Linuxppc-dev
mailing list