[PATCH v2 6/9] dpaa_eth: base dma mappings on the fman rx port

laurentiu.tudor at nxp.com laurentiu.tudor at nxp.com
Sat Apr 27 17:10:28 AEST 2019


From: Laurentiu Tudor <laurentiu.tudor at nxp.com>

The dma transactions initiator is the rx fman port so that's the device
that the dma mappings should be done. Previously the mappings were done
through the MAC device which makes no sense because it's neither dma-able
nor connected in any way to smmu.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor at nxp.com>
Acked-by: Madalin Bucur <madalin.bucur at nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 647e90e7434f..cdc7e6d83f77 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2805,8 +2805,15 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	mac_dev = dpaa_mac_dev_get(pdev);
+	if (IS_ERR(mac_dev)) {
+		dev_err(&pdev->dev, "dpaa_mac_dev_get() failed\n");
+		err = PTR_ERR(mac_dev);
+		goto probe_err;
+	}
+
 	/* device used for DMA mapping */
-	dev = pdev->dev.parent;
+	dev = fman_port_get_device(mac_dev->port[RX]);
 	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
 	if (err) {
 		dev_err(dev, "dma_coerce_mask_and_coherent() failed\n");
@@ -2831,13 +2838,6 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 
 	priv->msg_enable = netif_msg_init(debug, DPAA_MSG_DEFAULT);
 
-	mac_dev = dpaa_mac_dev_get(pdev);
-	if (IS_ERR(mac_dev)) {
-		dev_err(dev, "dpaa_mac_dev_get() failed\n");
-		err = PTR_ERR(mac_dev);
-		goto free_netdev;
-	}
-
 	/* If fsl_fm_max_frm is set to a higher value than the all-common 1500,
 	 * we choose conservatively and let the user explicitly set a higher
 	 * MTU via ifconfig. Otherwise, the user may end up with different MTUs
@@ -2973,9 +2973,9 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	qman_release_cgrid(priv->cgr_data.cgr.cgrid);
 free_dpaa_bps:
 	dpaa_bps_free(priv);
-free_netdev:
 	dev_set_drvdata(dev, NULL);
 	free_netdev(net_dev);
+probe_err:
 
 	return err;
 }
-- 
2.17.1



More information about the Linuxppc-dev mailing list