[PATCH v4 0/5] powerpc/perf: IMC trace-mode support

Anju T Sudhakar anju at linux.vnet.ibm.com
Tue Apr 16 19:44:49 AEST 2019


Hi,

Kindly ignore this series, since patch 5/5 in this series doesn't 
incorporate the event-format change

that I've done in v4 of this series.


Apologies for the inconvenience. I will post the updated v5 soon.


Thanks,

Anju

On 4/15/19 3:41 PM, Anju T Sudhakar wrote:
> IMC (In-Memory collection counters) is a hardware monitoring facility
> that collects large number of hardware performance events.
> POWER9 support two modes for IMC which are the Accumulation mode and
> Trace mode. In Accumulation mode, event counts are accumulated in system
> Memory. Hypervisor then reads the posted counts periodically or when
> requested. In IMC Trace mode, the 64 bit trace scom value is initialized
> with the event information. The CPMC*SEL and CPMC_LOAD in the trace scom, specifies
> the event to be monitored and the sampling duration. On each overflow in the
> CPMC*SEL, hardware snapshots the program counter along with event counts
> and writes into memory pointed by LDBAR. LDBAR has bits to indicate whether
> hardware is configured for accumulation or trace mode.
> Currently the event monitored for trace-mode is fixed as cycle.
>
> Trace-IMC Implementation:
> --------------------------
> To enable trace-imc, we need to
> 								
> * Add trace node in the DTS file for power9, so that the new trace node can
> be discovered by the kernel.
> 								
> Information included in the DTS file are as follows, (a snippet from
> the ima-catalog)
> 								
> TRACE_IMC: trace-events {
>       #address-cells = <0x1>;
>       #size-cells = <0x1>;
>       event at 10200000 {
> 	 event-name = "cycles" ;
> 	 reg = <0x10200000 0x8>;
> 	 desc = "Reference cycles" ;
>       };
>   };
>   trace at 0 {
> 	 compatible = "ibm,imc-counters";
> 	 events-prefix = "trace_";
> 	 reg = <0x0 0x8>;
> 	 events = < &TRACE_IMC >;
> 	 type = <0x2>;
> 	 size = <0x40000>;
>   };
> 								
> OP-BUILD changes needed to include the "trace node" is already pulled in
> to the ima-catalog repo.
> 								
> ps://github.com/open-power/op-build/commit/d3e75dc26d1283d7d5eb444bff1ec9e40d5dfc07
> 								
> * Enchance the opal_imc_counters_* calls to support this new trace mode
> in imc. Add support to initialize the trace-mode scom.
> 								
> TRACE_IMC_SCOM bit representation:
> 								
> 0:1     : SAMPSEL
> 2:33    : CPMC_LOAD
> 34:40   : CPMC1SEL
> 41:47   : CPMC2SEL
> 48:50   : BUFFERSIZE
> 51:63   : RESERVED
> 								
> CPMC_LOAD contains the sampling duration. SAMPSEL and CPMC*SEL determines
> the event to count. BUFFRSIZE indicates the memory range. On each overflow,
> hardware snapshots program counter along with event counts and update the
> memory and reloads the CMPC_LOAD value for the next sampling duration.
> IMC hardware does not support exceptions, so it quietly wraps around if
> memory buffer reaches the end.
>
> OPAL support for IMC trace mode is already upstream.
>
> * Set LDBAR spr to enable imc-trace mode.
>                                                                               
>    LDBAR Layout:
>                                                                               
>    0     : Enable/Disable
>    1     : 0 -> Accumulation Mode
>            1 -> Trace Mode
>    2:3   : Reserved
>    4-6   : PB scope
>    7     : Reserved
>    8:50  : Counter Address
>    51:63 : Reserved
>
> ----------------------
>
> PMI interrupt handling is avoided, since IMC trace mode snapshots the
> program counter and update to the memory. And this also provide a way for
> the operating system to do instruction sampling in real time without
> PMI(Performance Monitoring Interrupts) processing overhead.          								    					
> Performance data using 'perf top' with and without trace-imc event:
> 								
> PMI interrupts count when `perf top` command is executed without trace-imc event.
> 								
> # cat /proc/interrupts  (a snippet from the output)
> 9944      1072        804        804       1644        804       1306
> 804        804        804        804        804        804        804
> 804        804       1961       1602        804        804       1258
> [-----------------------------------------------------------------]
> 803        803        803        803        803        803        803
> 803        803        803        803        804        804        804
> 804        804        804        804        804        804        803
> 803        803        803        803        803       1306        803
> 803   Performance monitoring interrupts
> 								
> 								
> `perf top` with trace-imc (executed right after 'perf top' without trace-imc event):
> 								
> # perf top -e trace_imc/trace_cycles/
> 12.50%  [kernel]          [k] arch_cpu_idle
> 11.81%  [kernel]          [k] __next_timer_interrupt
> 11.22%  [kernel]          [k] rcu_idle_enter
> 10.25%  [kernel]          [k] find_next_bit
>   7.91%  [kernel]          [k] do_idle
>   7.69%  [kernel]          [k] rcu_dynticks_eqs_exit
>   5.20%  [kernel]          [k] tick_nohz_idle_stop_tick
>       [-----------------------]
> 								
> # cat /proc/interrupts (a snippet from the output)
> 								
> 9944      1072        804        804       1644        804       1306
> 804        804        804        804        804        804        804
> 804        804       1961       1602        804        804       1258
> [-----------------------------------------------------------------]
> 803        803        803        803        803        803        803
> 803        803        803        804        804        804        804
> 804        804        804        804        804        804        803
> 803        803        803        803        803       1306        803
> 803   Performance monitoring interrupts
> 								
> The PMI interrupts count remains the same.
>
>
> Changelog:
> ----------
>  From v3 -> v4:
>
> * trace_imc_refc is introduced. So that even if, core-imc
> is disabled, trace-imc can be used.
>
> * trace_imc_pmu_sched_task is removed and opal start/stop
> is invoked in trace_imc_event_add/del function.
>
>
> Suggestions/comments are welcome.
>
> Anju T Sudhakar (4):
>    powerpc/include: Add data structures and macros for IMC trace mode
>    powerpc/perf: Rearrange setting of ldbar for thread-imc
>    powerpc/perf: Trace imc events detection and cpuhotplug
>    powerpc/perf: Trace imc PMU functions
>
> Madhavan Srinivasan (1):
>    powerpc/perf: Add privileged access check for thread_imc
>
>   arch/powerpc/include/asm/imc-pmu.h        |  39 +++
>   arch/powerpc/include/asm/opal-api.h       |   1 +
>   arch/powerpc/perf/imc-pmu.c               | 318 +++++++++++++++++++++-
>   arch/powerpc/platforms/powernv/opal-imc.c |   3 +
>   include/linux/cpuhotplug.h                |   1 +
>   5 files changed, 351 insertions(+), 11 deletions(-)
>



More information about the Linuxppc-dev mailing list