[PATCH kernel v3] powerpc/powernv: Isolate NVLinks between GV100GL on Witherspoon

Alexey Kardashevskiy aik at ozlabs.ru
Thu Apr 11 16:48:44 AEST 2019


The NVIDIA V100 SXM2 GPUs are connected to the CPU via PCIe links and
(on POWER9) NVLinks. In addition to that, GPUs themselves have direct
peer-to-peer NVLinks in groups of 2 to 4 GPUs with no buffers/latches
between GPUs.

Because of these interconnected NVLinks, the POWERNV platform puts such
interconnected GPUs to the same IOMMU group. However users want to pass
GPUs through individually which requires separate IOMMU groups.

Thankfully V100 GPUs implement an interface to disable arbitrary links
by programming link disabling mask via the GPU's BAR0. Once a link is
disabled, it only can be enabled after performing the secondary bus reset
(SBR) on the GPU. Since these GPUs do not advertise any other type of
reset, it is reset by the platform's SBR handler.

This adds an extra step to the POWERNV's SBR handler to block NVLinks to
GPUs which do not belong to the same group as the GPU being reset.

This adds a new "isolate_nvlink" kernel parameter to force GPU isolation;
when enabled, every GPU gets placed in its own IOMMU group. The new
parameter is off by default to preserve the existing behaviour.

Before isolating:
[nvdbg ~]$ nvidia-smi topo -m
        GPU0    GPU1    GPU2    CPU Affinity
GPU0     X      NV2     NV2     0-0
GPU1    NV2      X      NV2     0-0
GPU2    NV2     NV2      X      0-0

After isolating:
[nvdbg ~]$ nvidia-smi topo -m
        GPU0    GPU1    GPU2    CPU Affinity
GPU0     X      PHB     PHB     0-0
GPU1    PHB      X      PHB     0-0
GPU2    PHB     PHB      X      0-0

Where:
  X    = Self
  PHB  = Connection traversing PCIe as well as a PCIe Host Bridge (typically the CPU)
  NV#  = Connection traversing a bonded set of # NVLinks

Signed-off-by: Alexey Kardashevskiy <aik at ozlabs.ru>
---
Changes:
v3:
* added pci_err() for failed ioremap
* reworked commit log

v2:
* this is rework of [PATCH kernel RFC 0/2] vfio, powerpc/powernv: Isolate GV100GL
but this time it is contained in the powernv platform
---
 arch/powerpc/platforms/powernv/Makefile      |   2 +-
 arch/powerpc/platforms/powernv/pci.h         |   1 +
 arch/powerpc/platforms/powernv/eeh-powernv.c |   1 +
 arch/powerpc/platforms/powernv/npu-dma.c     |  24 +++-
 arch/powerpc/platforms/powernv/nvlinkgpu.c   | 137 +++++++++++++++++++
 5 files changed, 162 insertions(+), 3 deletions(-)
 create mode 100644 arch/powerpc/platforms/powernv/nvlinkgpu.c

diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index da2e99efbd04..60a10d3b36eb 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -6,7 +6,7 @@ obj-y			+= opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o
 obj-y			+= opal-kmsg.o opal-powercap.o opal-psr.o opal-sensor-groups.o
 
 obj-$(CONFIG_SMP)	+= smp.o subcore.o subcore-asm.o
-obj-$(CONFIG_PCI)	+= pci.o pci-ioda.o npu-dma.o pci-ioda-tce.o
+obj-$(CONFIG_PCI)	+= pci.o pci-ioda.o npu-dma.o pci-ioda-tce.o nvlinkgpu.o
 obj-$(CONFIG_CXL_BASE)	+= pci-cxl.o
 obj-$(CONFIG_EEH)	+= eeh-powernv.o
 obj-$(CONFIG_PPC_SCOM)	+= opal-xscom.o
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 8e36da379252..9fd3f391482c 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -250,5 +250,6 @@ extern void pnv_pci_unlink_table_and_group(struct iommu_table *tbl,
 extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
 		void *tce_mem, u64 tce_size,
 		u64 dma_offset, unsigned int page_shift);
+extern void pnv_try_isolate_nvidia_v100(struct pci_dev *gpdev);
 
 #endif /* __POWERNV_PCI_H */
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index f38078976c5d..464b097d9635 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -937,6 +937,7 @@ void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
 		pnv_eeh_bridge_reset(dev, EEH_RESET_HOT);
 		pnv_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE);
 	}
+	pnv_try_isolate_nvidia_v100(dev);
 }
 
 static void pnv_eeh_wait_for_pending(struct pci_dn *pdn, const char *type,
diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
index dc23d9d2a7d9..d4f9ee6222b5 100644
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ b/arch/powerpc/platforms/powernv/npu-dma.c
@@ -22,6 +22,23 @@
 
 #include "pci.h"
 
+static bool isolate_nvlink;
+
+static int __init parse_isolate_nvlink(char *p)
+{
+	bool val;
+
+	if (!p)
+		val = true;
+	else if (kstrtobool(p, &val))
+		return -EINVAL;
+
+	isolate_nvlink = val;
+
+	return 0;
+}
+early_param("isolate_nvlink", parse_isolate_nvlink);
+
 /*
  * spinlock to protect initialisation of an npu_context for a particular
  * mm_struct.
@@ -549,7 +566,7 @@ struct iommu_table_group *pnv_try_setup_npu_table_group(struct pnv_ioda_pe *pe)
 
 	hose = pci_bus_to_host(npdev->bus);
 
-	if (hose->npu) {
+	if (hose->npu && !isolate_nvlink) {
 		table_group = &hose->npu->npucomp.table_group;
 
 		if (!table_group->group) {
@@ -559,7 +576,10 @@ struct iommu_table_group *pnv_try_setup_npu_table_group(struct pnv_ioda_pe *pe)
 					pe->pe_number);
 		}
 	} else {
-		/* Create a group for 1 GPU and attached NPUs for POWER8 */
+		/*
+		 * Create a group for 1 GPU and attached NPUs for
+		 * POWER8 (always) or POWER9 (when isolate_nvlink).
+		 */
 		pe->npucomp = kzalloc(sizeof(*pe->npucomp), GFP_KERNEL);
 		table_group = &pe->npucomp->table_group;
 		table_group->ops = &pnv_npu_peers_ops;
diff --git a/arch/powerpc/platforms/powernv/nvlinkgpu.c b/arch/powerpc/platforms/powernv/nvlinkgpu.c
new file mode 100644
index 000000000000..2a97cb15b6d0
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/nvlinkgpu.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * A helper to disable NVLinks between GPUs on IBM Withersponn platform.
+ *
+ * Copyright (C) 2019 IBM Corp.  All rights reserved.
+ *     Author: Alexey Kardashevskiy <aik at ozlabs.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/iommu.h>
+#include <linux/pci.h>
+
+static int nvlinkgpu_is_ph_in_group(struct device *dev, void *data)
+{
+	return dev->of_node->phandle == *(phandle *) data;
+}
+
+static u32 nvlinkgpu_get_disable_mask(struct device *dev)
+{
+	int npu, peer;
+	u32 mask;
+	struct device_node *dn;
+	struct iommu_group *group;
+
+	dn = dev->of_node;
+	if (!of_find_property(dn, "ibm,nvlink-peers", NULL))
+		return 0;
+
+	group = iommu_group_get(dev);
+	if (!group)
+		return 0;
+
+	/*
+	 * Collect links to keep which includes links to NPU and links to
+	 * other GPUs in the same IOMMU group.
+	 */
+	for (npu = 0, mask = 0; ; ++npu) {
+		u32 npuph = 0;
+
+		if (of_property_read_u32_index(dn, "ibm,npu", npu, &npuph))
+			break;
+
+		for (peer = 0; ; ++peer) {
+			u32 peerph = 0;
+
+			if (of_property_read_u32_index(dn, "ibm,nvlink-peers",
+					peer, &peerph))
+				break;
+
+			if (peerph != npuph &&
+				!iommu_group_for_each_dev(group, &peerph,
+					nvlinkgpu_is_ph_in_group))
+				continue;
+
+			mask |= 1 << (peer + 16);
+		}
+	}
+	iommu_group_put(group);
+
+	/* Disabling mechanism takes links to disable so invert it here */
+	mask = ~mask & 0x3F0000;
+
+	return mask;
+}
+
+void pnv_try_isolate_nvidia_v100(struct pci_dev *bridge)
+{
+	u32 mask, val;
+	void __iomem *bar0_0, *bar0_120000, *bar0_a00000;
+	struct pci_dev *pdev;
+	u16 cmd = 0, cmdmask = PCI_COMMAND_MEMORY;
+
+	if (!bridge->subordinate)
+		return;
+
+	pdev = list_first_entry_or_null(&bridge->subordinate->devices,
+			struct pci_dev, bus_list);
+	if (!pdev)
+		return;
+
+	if (pdev->vendor != PCI_VENDOR_ID_NVIDIA)
+		return;
+
+	mask = nvlinkgpu_get_disable_mask(&pdev->dev);
+	if (!mask)
+		return;
+
+	bar0_0 = pci_iomap_range(pdev, 0, 0, 0x10000);
+	if (!bar0_0) {
+		pci_err(pdev, "Error mapping BAR0 @0\n");
+		return;
+	}
+	bar0_120000 = pci_iomap_range(pdev, 0, 0x120000, 0x10000);
+	if (!bar0_120000) {
+		pci_err(pdev, "Error mapping BAR0 @120000\n");
+		goto bar0_0_unmap;
+	}
+	bar0_a00000 = pci_iomap_range(pdev, 0, 0xA00000, 0x10000);
+	if (!bar0_a00000) {
+		pci_err(pdev, "Error mapping BAR0 @A00000\n");
+		goto bar0_120000_unmap;
+	}
+
+	pci_restore_state(pdev);
+	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+	if ((cmd & cmdmask) != cmdmask)
+		pci_write_config_word(pdev, PCI_COMMAND, cmd | cmdmask);
+
+	/*
+	 * The sequence is from "Tesla P100 and V100 SXM2 NVLink Isolation on
+	 * Multi-Tenant Systems".
+	 * The register names are not provided there either, hence raw values.
+	 */
+	iowrite32(0x4, bar0_120000 + 0x4C);
+	iowrite32(0x2, bar0_120000 + 0x2204);
+	val = ioread32(bar0_0 + 0x200);
+	val |= 0x02000000;
+	iowrite32(val, bar0_0 + 0x200);
+	val = ioread32(bar0_a00000 + 0x148);
+	val |= mask;
+	iowrite32(val, bar0_a00000 + 0x148);
+
+	if ((cmd | cmdmask) != cmd)
+		pci_write_config_word(pdev, PCI_COMMAND, cmd);
+
+	pci_iounmap(pdev, bar0_a00000);
+bar0_120000_unmap:
+	pci_iounmap(pdev, bar0_120000);
+bar0_0_unmap:
+	pci_iounmap(pdev, bar0_0);
+}
-- 
2.17.1



More information about the Linuxppc-dev mailing list