[PATCH RFC/RFT 3/6] clk: divider: make endian aware
Jonas Gorski
jonas.gorski at gmail.com
Mon Apr 8 20:20:36 AEST 2019
Switch clk-divider to the endianness aware accessors to allow big endian
divider clocks on a per device level.
Signed-off-by: Jonas Gorski <jonas.gorski at gmail.com>
---
drivers/clk/clk-divider.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index e5a17265cfaf..63cb8617a007 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -135,7 +135,7 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
struct clk_divider *divider = to_clk_divider(hw);
unsigned int val;
- val = clk_readl(divider->reg) >> divider->shift;
+ val = clk_hw_readl(hw, divider->reg) >> divider->shift;
val &= clk_div_mask(divider->width);
return divider_recalc_rate(hw, parent_rate, val, divider->table,
@@ -370,7 +370,7 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
if (divider->flags & CLK_DIVIDER_READ_ONLY) {
u32 val;
- val = clk_readl(divider->reg) >> divider->shift;
+ val = clk_hw_readl(hw, divider->reg) >> divider->shift;
val &= clk_div_mask(divider->width);
return divider_ro_round_rate(hw, rate, prate, divider->table,
@@ -420,11 +420,11 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
if (divider->flags & CLK_DIVIDER_HIWORD_MASK) {
val = clk_div_mask(divider->width) << (divider->shift + 16);
} else {
- val = clk_readl(divider->reg);
+ val = clk_hw_readl(hw, divider->reg);
val &= ~(clk_div_mask(divider->width) << divider->shift);
}
val |= (u32)value << divider->shift;
- clk_writel(val, divider->reg);
+ clk_hw_writel(hw, val, divider->reg);
if (divider->lock)
spin_unlock_irqrestore(divider->lock, flags);
--
2.13.2
More information about the Linuxppc-dev
mailing list