[PATCH 02/13] soc/fsl/bman: map FBPR area in the iommu

[Laurentiu Tudor]

Hi Leo,

> -----Original Message-----
> From: Li Yang [mailto:leoyang.li at nxp.com]
> Sent: Friday, March 29, 2019 11:16 PM
> 
> On Fri, Mar 29, 2019 at 9:03 AM <laurentiu.tudor at nxp.com> wrote:
> >
> > From: Laurentiu Tudor <laurentiu.tudor at nxp.com>
> >
> > Add a one-to-one iommu mapping for bman private data memory (FBPR).
> > This is required for BMAN to work without faults behind an iommu.
> >
> > Signed-off-by: Laurentiu Tudor <laurentiu.tudor at nxp.com>
> > ---
> >  drivers/soc/fsl/qbman/bman_ccsr.c | 11 +++++++++++
> >  1 file changed, 11 insertions(+)
> >
> > diff --git a/drivers/soc/fsl/qbman/bman_ccsr.c
> b/drivers/soc/fsl/qbman/bman_ccsr.c
> > index 7c3cc968053c..b209c79511bb 100644
> > --- a/drivers/soc/fsl/qbman/bman_ccsr.c
> > +++ b/drivers/soc/fsl/qbman/bman_ccsr.c
> > @@ -29,6 +29,7 @@
> >   */
> >
> >  #include "bman_priv.h"
> > +#include <linux/iommu.h>
> >
> >  u16 bman_ip_rev;
> >  EXPORT_SYMBOL(bman_ip_rev);
> > @@ -178,6 +179,7 @@ static int fsl_bman_probe(struct platform_device
> *pdev)
> >         int ret, err_irq;
> >         struct device *dev = &pdev->dev;
> >         struct device_node *node = dev->of_node;
> > +       struct iommu_domain *domain;
> >         struct resource *res;
> >         u16 id, bm_pool_cnt;
> >         u8 major, minor;
> > @@ -225,6 +227,15 @@ static int fsl_bman_probe(struct platform_device
> *pdev)
> >
> >         dev_dbg(dev, "Allocated FBPR 0x%llx 0x%zx\n", fbpr_a, fbpr_sz);
> >
> > +       /* Create an 1-to-1 iommu mapping for FBPR area */
> > +       domain = iommu_get_domain_for_dev(dev);
> > +       if (domain) {
> > +               ret = iommu_map(domain, fbpr_a, fbpr_a, fbpr_sz,
> > +                               IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE);
> > +               if (ret)
> > +                       dev_warn(dev, "failed to iommu_map() %d\n",
> ret);
> > +       }
> 
> Like Robin has pointed out, could you explain why the mapping in this
> patch and other similar patches cannot be dealt with the dma APIs
> automatically?  If the current bqman driver doesn't use the dma APIs
> correctly, we need to fix that instead of doing the mapping
> explicitly.

Please see my reply to Robin.
As a side comment, if we want to convert to dma api it will be interesting to see how we'll deal with the qman portal devices as they require a smmu mapping for an area of their register block (where stashing goes). Problem is they treated as distinct devices, the address where they should dma cannot be configured independently for each one of them. I think I can came up with a proposal but probably will not look very pretty.

---
Best Regards, Laurentiu

> > +
> >         bm_set_memory(fbpr_a, fbpr_sz);
> >
> >         err_irq = platform_get_irq(pdev, 0);
> > --
> > 2.17.1
> >