[PATCH v2 7/7] net: stmmac: dwmac-meson8b: use xxxsetbits32
Corentin Labbe
clabbe at baylibre.com
Tue Sep 25 05:04:16 AEST 2018
This patch convert meson stmmac glue driver to use all xxxsetbits32 functions.
Signed-off-by: Corentin Labbe <clabbe at baylibre.com>
---
.../net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 56 +++++++++-------------
1 file changed, 22 insertions(+), 34 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index c5979569fd60..abcf65588576 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -23,6 +23,7 @@
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/stmmac.h>
+#include <linux/setbits.h>
#include "stmmac_platform.h"
@@ -75,18 +76,6 @@ struct meson8b_dwmac_clk_configs {
struct clk_gate rgmii_tx_en;
};
-static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
- u32 mask, u32 value)
-{
- u32 data;
-
- data = readl(dwmac->regs + reg);
- data &= ~mask;
- data |= (value & mask);
-
- writel(data, dwmac->regs + reg);
-}
-
static struct clk *meson8b_dwmac_register_clk(struct meson8b_dwmac *dwmac,
const char *name_suffix,
const char **parent_names,
@@ -192,14 +181,13 @@ static int meson8b_set_phy_mode(struct meson8b_dwmac *dwmac)
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
/* enable RGMII mode */
- meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
- PRG_ETH0_RGMII_MODE,
- PRG_ETH0_RGMII_MODE);
+ clrsetbits_le32(dwmac->regs + PRG_ETH0, PRG_ETH0_RGMII_MODE,
+ PRG_ETH0_RGMII_MODE);
break;
case PHY_INTERFACE_MODE_RMII:
/* disable RGMII mode -> enables RMII mode */
- meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
- PRG_ETH0_RGMII_MODE, 0);
+ clrsetbits_le32(dwmac->regs + PRG_ETH0, PRG_ETH0_RGMII_MODE,
+ 0);
break;
default:
dev_err(dwmac->dev, "fail to set phy-mode %s\n",
@@ -218,15 +206,15 @@ static int meson_axg_set_phy_mode(struct meson8b_dwmac *dwmac)
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
/* enable RGMII mode */
- meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
- PRG_ETH0_EXT_PHY_MODE_MASK,
- PRG_ETH0_EXT_RGMII_MODE);
+ clrsetbits_le32(dwmac->regs + PRG_ETH0,
+ PRG_ETH0_EXT_PHY_MODE_MASK,
+ PRG_ETH0_EXT_RGMII_MODE);
break;
case PHY_INTERFACE_MODE_RMII:
/* disable RGMII mode -> enables RMII mode */
- meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
- PRG_ETH0_EXT_PHY_MODE_MASK,
- PRG_ETH0_EXT_RMII_MODE);
+ clrsetbits_le32(dwmac->regs + PRG_ETH0,
+ PRG_ETH0_EXT_PHY_MODE_MASK,
+ PRG_ETH0_EXT_RMII_MODE);
break;
default:
dev_err(dwmac->dev, "fail to set phy-mode %s\n",
@@ -255,11 +243,11 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
/* only relevant for RMII mode -> disable in RGMII mode */
- meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
- PRG_ETH0_INVERTED_RMII_CLK, 0);
+ clrsetbits_le32(dwmac->regs + PRG_ETH0,
+ PRG_ETH0_INVERTED_RMII_CLK, 0);
- meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
- tx_dly_val << PRG_ETH0_TXDLY_SHIFT);
+ clrsetbits_le32(dwmac->regs + PRG_ETH0, PRG_ETH0_TXDLY_MASK,
+ tx_dly_val << PRG_ETH0_TXDLY_SHIFT);
/* Configure the 125MHz RGMII TX clock, the IP block changes
* the output automatically (= without us having to configure
@@ -287,13 +275,13 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
case PHY_INTERFACE_MODE_RMII:
/* invert internal clk_rmii_i to generate 25/2.5 tx_rx_clk */
- meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
- PRG_ETH0_INVERTED_RMII_CLK,
- PRG_ETH0_INVERTED_RMII_CLK);
+ clrsetbits_le32(dwmac->regs + PRG_ETH0,
+ PRG_ETH0_INVERTED_RMII_CLK,
+ PRG_ETH0_INVERTED_RMII_CLK);
/* TX clock delay cannot be configured in RMII mode */
- meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
- 0);
+ clrsetbits_le32(dwmac->regs + PRG_ETH0, PRG_ETH0_TXDLY_MASK,
+ 0);
break;
@@ -304,8 +292,8 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
}
/* enable TX_CLK and PHY_REF_CLK generator */
- meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TX_AND_PHY_REF_CLK,
- PRG_ETH0_TX_AND_PHY_REF_CLK);
+ clrsetbits_le32(dwmac->regs + PRG_ETH0, PRG_ETH0_TX_AND_PHY_REF_CLK,
+ PRG_ETH0_TX_AND_PHY_REF_CLK);
return 0;
}
--
2.16.4
More information about the Linuxppc-dev
mailing list