[PATCH] powerpc/mpc85xx: fix issues in clock node

[Scott Wood]

On Tue, 2018-09-11 at 10:12 +0800, andy.tang at nxp.com wrote:
> From: Yuantian Tang <andy.tang at nxp.com>
> 
> The compatible string is not correct in the clock node.
> The clocks property refers to the wrong node too.
> This patch is to fix them.
> 
> Signed-off-by: Tang Yuantian <andy.tang at nxp.com>
> ---
>  arch/powerpc/boot/dts/fsl/t1023si-post.dtsi |    8 ++++----
>  1 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
> b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
> index 4908af5..763caf4 100644
> --- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
> @@ -348,7 +348,7 @@
>  		mux0: mux0 at 0 {
>  			#clock-cells = <0>;
>  			reg = <0x0 4>;
> -			compatible = "fsl,core-mux-clock";
> +			compatible = "fsl,qoriq-core-mux-2.0";
>  			clocks = <&pll0 0>, <&pll0 1>;
>  			clock-names = "pll0_0", "pll0_1";
>  			clock-output-names = "cmux0";
> @@ -356,9 +356,9 @@
>  		mux1: mux1 at 20 {
>  			#clock-cells = <0>;
>  			reg = <0x20 4>;
> -			compatible = "fsl,core-mux-clock";
> -			clocks = <&pll0 0>, <&pll0 1>;
> -			clock-names = "pll0_0", "pll0_1";
> +			compatible = "fsl,qoriq-core-mux-2.0";
> +			clocks = <&pll1 0>, <&pll1 1>;
> +			clock-names = "pll1_0", "pll1_1";
>  			clock-output-names = "cmux1";
>  		};
>  	};

These are the legacy nodes.  Why not just remove them instead of fixing them? 
Now that the cpufreq driver is fixed we could get rid of the legacy nodes for
all the chips.

-Scott