[PATCH 14/14] powerpc/eeh: Cleanup control flow in eeh_handle_normal_event()
Sam Bobroff
sbobroff at linux.ibm.com
Wed Sep 12 11:23:33 AEST 2018
Rather than mixing "if (state)" blocks and gotos, convert entirely to
"if (state)" blocks to make the state machine behaviour clearer.
Signed-off-by: Sam Bobroff <sbobroff at linux.ibm.com>
---
arch/powerpc/kernel/eeh_driver.c | 196 +++++++++++++++----------------
1 file changed, 94 insertions(+), 102 deletions(-)
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index e7f757cd839b..9446248eb6b8 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -808,10 +808,8 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
pr_err("EEH: PHB#%x-PE#%x has failed %d times in the last hour and has been permanently disabled.\n",
pe->phb->global_number, pe->addr,
pe->freeze_count);
- goto hard_fail;
+ result = PCI_ERS_RESULT_DISCONNECT;
}
- pr_warn("EEH: This PCI device has failed %d times in the last hour and will be permanently disabled after %d failures.\n",
- pe->freeze_count, eeh_max_freezes);
/* Walk the various device drivers attached to this slot through
* a reset sequence, giving each an opportunity to do what it needs
@@ -823,31 +821,39 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
* the error. Override the result if necessary to have partially
* hotplug for this case.
*/
- pr_info("EEH: Notify device drivers to shutdown\n");
- eeh_set_channel_state(pe, pci_channel_io_frozen);
- eeh_set_irq_state(pe, false);
- eeh_pe_report("error_detected(IO frozen)", pe, eeh_report_error,
- &result);
- if ((pe->type & EEH_PE_PHB) &&
- result != PCI_ERS_RESULT_NONE &&
- result != PCI_ERS_RESULT_NEED_RESET)
- result = PCI_ERS_RESULT_NEED_RESET;
+ if (result != PCI_ERS_RESULT_DISCONNECT) {
+ pr_warn("EEH: This PCI device has failed %d times in the last hour and will be permanently disabled after %d failures.\n",
+ pe->freeze_count, eeh_max_freezes);
+ pr_info("EEH: Notify device drivers to shutdown\n");
+ eeh_set_channel_state(pe, pci_channel_io_frozen);
+ eeh_set_irq_state(pe, false);
+ eeh_pe_report("error_detected(IO frozen)", pe,
+ eeh_report_error, &result);
+ if ((pe->type & EEH_PE_PHB) &&
+ result != PCI_ERS_RESULT_NONE &&
+ result != PCI_ERS_RESULT_NEED_RESET)
+ result = PCI_ERS_RESULT_NEED_RESET;
+ }
/* Get the current PCI slot state. This can take a long time,
* sometimes over 300 seconds for certain systems.
*/
- rc = eeh_wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000);
- if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) {
- pr_warn("EEH: Permanent failure\n");
- goto hard_fail;
+ if (result != PCI_ERS_RESULT_DISCONNECT) {
+ rc = eeh_wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000);
+ if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) {
+ pr_warn("EEH: Permanent failure\n");
+ result = PCI_ERS_RESULT_DISCONNECT;
+ }
}
/* Since rtas may enable MMIO when posting the error log,
* don't post the error log until after all dev drivers
* have been informed.
*/
- pr_info("EEH: Collect temporary log\n");
- eeh_slot_error_detail(pe, EEH_LOG_TEMP);
+ if (result != PCI_ERS_RESULT_DISCONNECT) {
+ pr_info("EEH: Collect temporary log\n");
+ eeh_slot_error_detail(pe, EEH_LOG_TEMP);
+ }
/* If all device drivers were EEH-unaware, then shut
* down all of the device drivers, and hope they
@@ -859,7 +865,7 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
if (rc) {
pr_warn("%s: Unable to reset, err=%d\n",
__func__, rc);
- goto hard_fail;
+ result = PCI_ERS_RESULT_DISCONNECT;
}
}
@@ -868,9 +874,9 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
pr_info("EEH: Enable I/O for affected devices\n");
rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
- if (rc < 0)
- goto hard_fail;
- if (rc) {
+ if (rc < 0) {
+ result = PCI_ERS_RESULT_DISCONNECT;
+ } else if (rc) {
result = PCI_ERS_RESULT_NEED_RESET;
} else {
pr_info("EEH: Notify device drivers to resume I/O\n");
@@ -884,9 +890,9 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
pr_info("EEH: Enabled DMA for affected devices\n");
rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA);
- if (rc < 0)
- goto hard_fail;
- if (rc) {
+ if (rc < 0) {
+ result = PCI_ERS_RESULT_DISCONNECT;
+ } else if (rc) {
result = PCI_ERS_RESULT_NEED_RESET;
} else {
/*
@@ -899,12 +905,6 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
}
}
- /* If any device has a hard failure, then shut off everything. */
- if (result == PCI_ERS_RESULT_DISCONNECT) {
- pr_warn("EEH: Device driver gave up\n");
- goto hard_fail;
- }
-
/* If any device called out for a reset, then reset the slot */
if (result == PCI_ERS_RESULT_NEED_RESET) {
pr_info("EEH: Reset without hotplug activity\n");
@@ -912,89 +912,81 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
if (rc) {
pr_warn("%s: Cannot reset, err=%d\n",
__func__, rc);
- goto hard_fail;
+ result = PCI_ERS_RESULT_DISCONNECT;
+ } else {
+ result = PCI_ERS_RESULT_NONE;
+ eeh_set_channel_state(pe, pci_channel_io_normal);
+ eeh_set_irq_state(pe, true);
+ eeh_pe_report("slot_reset", pe, eeh_report_reset,
+ &result);
}
-
- pr_info("EEH: Notify device drivers "
- "the completion of reset\n");
- result = PCI_ERS_RESULT_NONE;
- eeh_set_channel_state(pe, pci_channel_io_normal);
- eeh_set_irq_state(pe, true);
- eeh_pe_report("slot_reset", pe, eeh_report_reset, &result);
}
- /* All devices should claim they have recovered by now. */
- if ((result != PCI_ERS_RESULT_RECOVERED) &&
- (result != PCI_ERS_RESULT_NONE)) {
- pr_warn("EEH: Not recovered\n");
- goto hard_fail;
- }
-
- /*
- * For those hot removed VFs, we should add back them after PF get
- * recovered properly.
- */
- list_for_each_entry_safe(edev, tmp, &rmv_data.removed_vf_list,
- rmv_entry) {
- eeh_add_virt_device(edev);
- list_del(&edev->rmv_entry);
- }
-
- /* Tell all device drivers that they can resume operations */
- pr_info("EEH: Notify device driver to resume\n");
- eeh_set_channel_state(pe, pci_channel_io_normal);
- eeh_set_irq_state(pe, true);
- eeh_pe_report("resume", pe, eeh_report_resume, NULL);
- eeh_for_each_pe(pe, tmp_pe) {
- eeh_pe_for_each_dev(tmp_pe, edev, tmp) {
- edev->mode &= ~EEH_DEV_NO_HANDLER;
- edev->in_error = false;
+ if ((result == PCI_ERS_RESULT_RECOVERED) ||
+ (result == PCI_ERS_RESULT_NONE)) {
+ /*
+ * For those hot removed VFs, we should add back them after PF
+ * get recovered properly.
+ */
+ list_for_each_entry_safe(edev, tmp, &rmv_data.removed_vf_list,
+ rmv_entry) {
+ eeh_add_virt_device(edev);
+ list_del(&edev->rmv_entry);
}
- }
- pr_info("EEH: Recovery successful.\n");
- goto final;
+ /* Tell all device drivers that they can resume operations */
+ pr_info("EEH: Notify device driver to resume\n");
+ eeh_set_channel_state(pe, pci_channel_io_normal);
+ eeh_set_irq_state(pe, true);
+ eeh_pe_report("resume", pe, eeh_report_resume, NULL);
+ eeh_for_each_pe(pe, tmp_pe) {
+ eeh_pe_for_each_dev(tmp_pe, edev, tmp) {
+ edev->mode &= ~EEH_DEV_NO_HANDLER;
+ edev->in_error = false;
+ }
+ }
-hard_fail:
- /*
- * About 90% of all real-life EEH failures in the field
- * are due to poorly seated PCI cards. Only 10% or so are
- * due to actual, failed cards.
- */
- pr_err("EEH: Unable to recover from failure from PHB#%x-PE#%x.\n"
- "Please try reseating or replacing it\n",
- pe->phb->global_number, pe->addr);
+ pr_info("EEH: Recovery successful.\n");
+ } else {
+ /*
+ * About 90% of all real-life EEH failures in the field
+ * are due to poorly seated PCI cards. Only 10% or so are
+ * due to actual, failed cards.
+ */
+ pr_err("EEH: Unable to recover from failure from PHB#%x-PE#%x.\n"
+ "Please try reseating or replacing it\n",
+ pe->phb->global_number, pe->addr);
- eeh_slot_error_detail(pe, EEH_LOG_PERM);
+ eeh_slot_error_detail(pe, EEH_LOG_PERM);
- /* Notify all devices that they're about to go down. */
- eeh_set_channel_state(pe, pci_channel_io_perm_failure);
- eeh_set_irq_state(pe, false);
- eeh_pe_report("error_detected(permanent failure)", pe,
- eeh_report_failure, NULL);
+ /* Notify all devices that they're about to go down. */
+ eeh_set_channel_state(pe, pci_channel_io_perm_failure);
+ eeh_set_irq_state(pe, false);
+ eeh_pe_report("error_detected(permanent failure)", pe,
+ eeh_report_failure, NULL);
- /* Mark the PE to be removed permanently */
- eeh_pe_state_mark(pe, EEH_PE_REMOVED);
+ /* Mark the PE to be removed permanently */
+ eeh_pe_state_mark(pe, EEH_PE_REMOVED);
- /*
- * Shut down the device drivers for good. We mark
- * all removed devices correctly to avoid access
- * the their PCI config any more.
- */
- if (pe->type & EEH_PE_VF) {
- eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL);
- eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
- } else {
- eeh_pe_state_clear(pe, EEH_PE_PRI_BUS);
- eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+ /*
+ * Shut down the device drivers for good. We mark
+ * all removed devices correctly to avoid access
+ * the their PCI config any more.
+ */
+ if (pe->type & EEH_PE_VF) {
+ eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL);
+ eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+ } else {
+ eeh_pe_state_clear(pe, EEH_PE_PRI_BUS);
+ eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
- pci_lock_rescan_remove();
- pci_hp_remove_devices(bus);
- pci_unlock_rescan_remove();
- /* The passed PE should no longer be used */
- return;
+ pci_lock_rescan_remove();
+ pci_hp_remove_devices(bus);
+ pci_unlock_rescan_remove();
+ /* The passed PE should no longer be used */
+ return;
+ }
}
-final:
eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
}
--
2.19.0.2.gcad72f5712
More information about the Linuxppc-dev
mailing list