[PATCH 5/6] pci: layerscape: Add the EP mode support.

Kishon Vijay Abraham I kishon at ti.com
Wed Oct 31 15:15:21 AEDT 2018


Hi,

On 31/10/18 8:03 AM, Xiaowei Bao wrote:
> 
> 
> -----Original Message-----
> From: Xiaowei Bao 
> Sent: 2018年10月26日 17:19
> To: 'Kishon Vijay Abraham I' <kishon at ti.com>; bhelgaas at google.com; robh+dt at kernel.org; mark.rutland at arm.com; shawnguo at kernel.org; Leo Li <leoyang.li at nxp.com>; lorenzo.pieralisi at arm.com; arnd at arndb.de; gregkh at linuxfoundation.org; M.h. Lian <minghuan.lian at nxp.com>; Mingkai Hu <mingkai.hu at nxp.com>; Roy Zang <roy.zang at nxp.com>; kstewart at linuxfoundation.org; cyrille.pitchen at free-electrons.com; pombredanne at nexb.com; shawn.lin at rock-chips.com; niklas.cassel at axis.com; linux-pci at vger.kernel.org; devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linuxppc-dev at lists.ozlabs.org
> Cc: Jiafei Pan <jiafei.pan at nxp.com>
> Subject: RE: [PATCH 5/6] pci: layerscape: Add the EP mode support.
> 
> 
> 
> -----Original Message-----
> From: Kishon Vijay Abraham I <kishon at ti.com>
> Sent: 2018年10月26日 13:29
> To: Xiaowei Bao <xiaowei.bao at nxp.com>; bhelgaas at google.com; robh+dt at kernel.org; mark.rutland at arm.com; shawnguo at kernel.org; Leo Li <leoyang.li at nxp.com>; lorenzo.pieralisi at arm.com; arnd at arndb.de; gregkh at linuxfoundation.org; M.h. Lian <minghuan.lian at nxp.com>; Mingkai Hu <mingkai.hu at nxp.com>; Roy Zang <roy.zang at nxp.com>; kstewart at linuxfoundation.org; cyrille.pitchen at free-electrons.com; pombredanne at nexb.com; shawn.lin at rock-chips.com; niklas.cassel at axis.com; linux-pci at vger.kernel.org; devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linuxppc-dev at lists.ozlabs.org
> Subject: Re: [PATCH 5/6] pci: layerscape: Add the EP mode support.
> 
> Hi,
> 
> On Thursday 25 October 2018 04:39 PM, Xiaowei Bao wrote:
>> Add the PCIe EP mode support for layerscape platform.
>>
>> Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com>
>> ---
>>  drivers/pci/controller/dwc/Makefile            |    2 +-
>>  drivers/pci/controller/dwc/pci-layerscape-ep.c |  161
>> ++++++++++++++++++++++++
>>  2 files changed, 162 insertions(+), 1 deletions(-)  create mode
>> 100644 drivers/pci/controller/dwc/pci-layerscape-ep.c
>>
>> diff --git a/drivers/pci/controller/dwc/Makefile
>> b/drivers/pci/controller/dwc/Makefile
>> index 5d2ce72..b26d617 100644
>> --- a/drivers/pci/controller/dwc/Makefile
>> +++ b/drivers/pci/controller/dwc/Makefile
>> @@ -8,7 +8,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
>>  obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
>>  obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
>>  obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
>> -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
>> +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
>>  obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
>>  obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
>>  obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o diff --git 
>> a/drivers/pci/controller/dwc/pci-layerscape-ep.c
>> b/drivers/pci/controller/dwc/pci-layerscape-ep.c
>> new file mode 100644
>> index 0000000..3b33bbc
>> --- /dev/null
>> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
>> @@ -0,0 +1,161 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * PCIe controller EP driver for Freescale Layerscape SoCs
>> + *
>> + * Copyright (C) 2018 NXP Semiconductor.
>> + *
>> + * Author: Xiaowei Bao <xiaowei.bao at nxp.com>  */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/init.h>
>> +#include <linux/of_pci.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/of_address.h>
>> +#include <linux/pci.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/resource.h>
>> +
>> +#include "pcie-designware.h"
>> +
>> +#define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
> 
> The base address should come from dt.
>> +
>> +struct ls_pcie_ep {
>> +	struct dw_pcie		*pci;
>> +};
>> +
>> +#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
>> +
>> +static bool ls_pcie_is_bridge(struct ls_pcie_ep *pcie) {
>> +	struct dw_pcie *pci = pcie->pci;
>> +	u32 header_type;
>> +
>> +	header_type = ioread8(pci->dbi_base + PCI_HEADER_TYPE);
>> +	header_type &= 0x7f;
>> +
>> +	return header_type == PCI_HEADER_TYPE_BRIDGE; }
>> +
>> +static int ls_pcie_establish_link(struct dw_pcie *pci) {
>> +	return 0;
>> +}
> 
> There should be some way by which EP should tell RC that it is not configured yet. Are there no bits to control LTSSM state initialization or Configuration retry status enabling?
> [Xiaowei Bao] There have not bits to control LTSSM state to tell the RC it is configured. The start link is auto completed.
> [Xiaowei Bao] Hi Kishon, is there any advice?

If there is no HW support, I don't think anything could be done here. This
could result in RC reading configuration space even before EP is fully initialized.
>> +
>> +static const struct dw_pcie_ops ls_pcie_ep_ops = {
>> +	.start_link = ls_pcie_establish_link, };
>> +
>> +static const struct of_device_id ls_pcie_ep_of_match[] = {
>> +	{ .compatible = "fsl,ls-pcie-ep",},
>> +	{ },
>> +};
>> +
>> +static void ls_pcie_ep_init(struct dw_pcie_ep *ep) {
>> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
>> +	struct pci_epc *epc = ep->epc;
>> +	enum pci_barno bar;
>> +
>> +	for (bar = BAR_0; bar <= BAR_5; bar++)
>> +		dw_pcie_ep_reset_bar(pci, bar);
>> +
>> +	epc->features |= EPC_FEATURE_NO_LINKUP_NOTIFIER; }
>> +
>> +static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
>> +				  enum pci_epc_irq_type type, u16 interrupt_num) {
>> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
>> +
>> +	switch (type) {
>> +	case PCI_EPC_IRQ_LEGACY:
>> +		return dw_pcie_ep_raise_legacy_irq(ep, func_no);
>> +	case PCI_EPC_IRQ_MSI:
>> +		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
>> +	case PCI_EPC_IRQ_MSIX:
>> +		return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
>> +	default:
>> +		dev_err(pci->dev, "UNKNOWN IRQ type\n");
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static struct dw_pcie_ep_ops pcie_ep_ops = {
>> +	.ep_init = ls_pcie_ep_init,
>> +	.raise_irq = ls_pcie_ep_raise_irq,
>> +};
>> +
>> +static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
>> +					struct platform_device *pdev)
>> +{
>> +	struct dw_pcie *pci = pcie->pci;
>> +	struct device *dev = pci->dev;
>> +	struct dw_pcie_ep *ep;
>> +	struct resource *res;
>> +	int ret;
>> +
>> +	ep = &pci->ep;
>> +	ep->ops = &pcie_ep_ops;
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
>> +	if (!res)
>> +		return -EINVAL;
>> +
>> +	ep->phys_base = res->start;
>> +	ep->addr_size = resource_size(res);
>> +
>> +	ret = dw_pcie_ep_init(ep);
>> +	if (ret) {
>> +		dev_err(dev, "failed to initialize endpoint\n");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int __init ls_pcie_ep_probe(struct platform_device *pdev) {
>> +	struct device *dev = &pdev->dev;
>> +	struct dw_pcie *pci;
>> +	struct ls_pcie_ep *pcie;
>> +	struct resource *dbi_base;
>> +	int ret;
>> +
>> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
>> +	if (!pcie)
>> +		return -ENOMEM;
>> +
>> +	pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
>> +	if (!pci)
>> +		return -ENOMEM;
>> +
>> +	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
>> +	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
>> +	if (IS_ERR(pci->dbi_base))
>> +		return PTR_ERR(pci->dbi_base);
>> +
>> +	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
>> +	pci->dev = dev;
>> +	pci->ops = &ls_pcie_ep_ops;
>> +	pcie->pci = pci;
>> +
>> +	if (ls_pcie_is_bridge(pcie))
>> +		return -ENODEV;
> 
> For an endpoint this condition should never occur. This should only mean, a wrong compatible has been used in dt.
> [Xiaowei Bao] This function is a way that can check the PCI controller whether work in EP mode, I think it is more safer. Of course, it can be removed.
> [Xiaowei Bao] Hi Kishon, is there any advice?

IMHO this check is not required.

Thanks
Kishon


More information about the Linuxppc-dev mailing list