[PATCH 0/8] add generic builtin command line

Maksym Kokhan maksym.kokhan at globallogic.com
Wed Oct 24 01:43:18 AEDT 2018


On Mon, Oct 8, 2018 at 9:01 PM Maksym Kokhan
<maksym.kokhan at globallogic.com> wrote:
>
> Hi, Daniel
>
> On Sat, Sep 29, 2018 at 9:17 PM <dwalker at fifo99.com> wrote:
> >
> > On Thu, Sep 27, 2018 at 07:55:08PM +0300, Maksym Kokhan wrote:
> > > Daniel Walker (7):
> > >   add generic builtin command line
> > >   drivers: of: ifdef out cmdline section
> > >   x86: convert to generic builtin command line
> > >   arm: convert to generic builtin command line
> > >   arm64: convert to generic builtin command line
> > >   mips: convert to generic builtin command line
> > >   powerpc: convert to generic builtin command line
> > >
> >
> > When I originally submitted these I had a very good conversion with Rob Herring
> > on the device tree changes. It seemed fairly clear that my approach in these
> > changes could be done better. It effected specifically arm64, but a lot of other
> > platforms use the device tree integrally. With arm64 you can reduce the changes
> > down to only Kconfig changes, and that would likely be the case for many of the
> > other architecture. I made patches to do this a while back, but have not had
> > time to test them and push them out.
>
> Can you please share this patches? I could test them and use to improve this
> generic command line implementation.
>
> > In terms of mips I think there's a fair amount of work needed to pull out their
> > architecture specific mangling into something generic. Part of my motivation for
> > these was to take the architecture specific feature and open that up for all the
> > architecture. So it makes sense that the mips changes should become part of
> > that.
>
> This is really makes sense, and we have intentions to implement it
> afterward. It would be easier to initially merge this simple
> implementation and then develop it step by step.
>
> > The only changes which have no comments are the generic changes, x86, and
> > powerpc. Those patches have been used at Cisco for years with no issues.
> > I added those changes into my -next tree for a round of testing. Assuming there
> > are no issues I can work out the merging with the architecture maintainers.
> > As for the other changes I think they can be done in time, as long as the
> > generic parts of upstream the rest can be worked on by any of the architecture
> > developers.
>
> Thanks,
> Maksym

We still have no response to patches for x86, arm, arm64 and powerpc.
Is current generic command line implementation appropriate for these
architectures?
Is it possible to merge these patches in the current form (for x86,
arm, arm64 and powerpc)?

Thanks,
Maksym


More information about the Linuxppc-dev mailing list