[PATCH kernel v2] powerpc/ioda/npu: Call skiboot's hot reset hook when disabling NPU2

[Alistair Popple]

> >>> wouldn't you also need to do that somewhere? Unless the driver
> >>> does it at startup?
> >> 
> >> VFIO performs GPU reset so I'd expect the GPUs to flush its caches
> >> without any software interactions. Am I hoping for too much here?
> > 
> > Sadly you are. It's not the GPU caches that need flushing, it's the CPU
> > caches. This needs to happen as part of the reset sequence, so I guess
> > you would need to add it to the VFIO driver.
> 
> Well, ok. Caches need flushing, will look into this but this fencing is
> still needed, is not it?

Yes. Although without the flushing I think you may get HMI's on any subsequent 
driver loads.

So from the point of view of what happens on the Skiboot/HW side this looks ok 
so long as all links on an NPU are assigned to the same guest (as this call 
resets every link on a given NPU).

Acked-by: Alistair Popple <alistair at popple.id.au>
 
> > - Alistair
> > 
> >>> - Alistair
> >>> 
> >>>>> - Alistair
> >>>>> 
> >>>>>>> - Alistair
> >>>>>>> 
> >>>>>>>>> - Alistair
> >>>>>>>>> 
> >>>>>>>>> On Monday, 15 October 2018 6:17:51 PM AEDT Alexey Kardashevskiy
> > 
> > wrote:
> >>>>>>>>>> Ping?
> >>>>>>>>>> 
> >>>>>>>>>> On 02/10/2018 13:20, Alexey Kardashevskiy wrote:
> >>>>>>>>>>> The skiboot firmware has a hot reset handler which fences the
> >>>>>>>>>>> NVIDIA V100
> >>>>>>>>>>> GPU RAM on Witherspoons and makes accesses no-op instead of
> >>>>>>>>>>> throwing HMIs:
> >>>>>>>>>>> https://github.com/open-power/skiboot/commit/fca2b2b839a67
> >>>>>>>>>>> 
> >>>>>>>>>>> Now we are going to pass V100 via VFIO which most certainly
> >>>>>>>>>>> involves
> >>>>>>>>>>> KVM guests which are often terminated without getting a chance
> >>>>>>>>>>> to
> >>>>>>>>>>> offline
> >>>>>>>>>>> GPU RAM so we end up with a running machine with misconfigured
> >>>>>>>>>>> memory.
> >>>>>>>>>>> Accessing this memory produces hardware management interrupts
> >>>>>>>>>>> (HMI)
> >>>>>>>>>>> which bring the host down.
> >>>>>>>>>>> 
> >>>>>>>>>>> To suppress HMIs, this wires up this hot reset hook to
> >>>>>>>>>>> vfio_pci_disable()
> >>>>>>>>>>> via pci_disable_device() which switches NPU2 to a safe mode and
> >>>>>>>>>>> prevents
> >>>>>>>>>>> HMIs.
> >>>>>>>>>>> 
> >>>>>>>>>>> Signed-off-by: Alexey Kardashevskiy <aik at ozlabs.ru>
> >>>>>>>>>>> ---
> >>>>>>>>>>> Changes:
> >>>>>>>>>>> v2:
> >>>>>>>>>>> * updated the commit log
> >>>>>>>>>>> ---
> >>>>>>>>>>> 
> >>>>>>>>>>>  arch/powerpc/platforms/powernv/pci-ioda.c | 10 ++++++++++
> >>>>>>>>>>>  1 file changed, 10 insertions(+)
> >>>>>>>>>>> 
> >>>>>>>>>>> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c
> >>>>>>>>>>> b/arch/powerpc/platforms/powernv/pci-ioda.c index
> >>>>>>>>>>> cde7102..e37b9cc 100644
> >>>>>>>>>>> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> >>>>>>>>>>> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> >>>>>>>>>>> @@ -3688,6 +3688,15 @@ static void pnv_pci_release_device(struct
> >>>>>>>>>>> pci_dev *pdev)>>>>>>>>>
> >>>>>>>>>>> 
> >>>>>>>>>>>  		pnv_ioda_release_pe(pe);
> >>>>>>>>>>>  
> >>>>>>>>>>>  }
> >>>>>>>>>>> 
> >>>>>>>>>>> +static void pnv_npu_disable_device(struct pci_dev *pdev)
> >>>>>>>>>>> +{
> >>>>>>>>>>> +	struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
> >>>>>>>>>>> +	struct eeh_pe *eehpe = edev ? edev->pe : NULL;
> >>>>>>>>>>> +
> >>>>>>>>>>> +	if (eehpe && eeh_ops && eeh_ops->reset)
> >>>>>>>>>>> +		eeh_ops->reset(eehpe, EEH_RESET_HOT);
> >>>>>>>>>>> +}
> >>>>>>>>>>> +
> >>>>>>>>>>> 
> >>>>>>>>>>>  static void pnv_pci_ioda_shutdown(struct pci_controller *hose)
> >>>>>>>>>>>  {
> >>>>>>>>>>>  
> >>>>>>>>>>>  	struct pnv_phb *phb = hose->private_data;
> >>>>>>>>>>> 
> >>>>>>>>>>> @@ -3732,6 +3741,7 @@ static const struct pci_controller_ops
> >>>>>>>>>>> pnv_npu_ioda_controller_ops = {>>>>>>>>>
> >>>>>>>>>>> 
> >>>>>>>>>>>  	.reset_secondary_bus	= pnv_pci_reset_secondary_bus,
> >>>>>>>>>>>  	.dma_set_mask		= pnv_npu_dma_set_mask,
> >>>>>>>>>>>  	.shutdown		= pnv_pci_ioda_shutdown,
> >>>>>>>>>>> 
> >>>>>>>>>>> +	.disable_device		= pnv_npu_disable_device,
> >>>>>>>>>>> 
> >>>>>>>>>>>  };
> >>>>>>>>>>>  
> >>>>>>>>>>>  static const struct pci_controller_ops
> >>>>>>>>>>>  pnv_npu_ocapi_ioda_controller_ops = {