[PATCH kernel v2] powerpc/ioda/npu: Call skiboot's hot reset hook when disabling NPU2

[Alistair Popple]

Hi Alexey,

On Tuesday, 16 October 2018 12:37:49 PM AEDT Alexey Kardashevskiy wrote:
> 
> On 16/10/2018 11:38, Alistair Popple wrote:
> > Hi Alexey,
> > 
> > Looking at the skiboot side I think we only fence the NVLink bricks as part of a
> > PCIe function level reset (FLR) rather than a PCI Hot or Fundamental reset which
> > I believe is what the code here does. So to fence the bricks you would need to
> > do either a FLR on the given link or alter Skiboot to fence a given link as part
> > of a hot reset.
> 
> The code here calls OPAL to execute this code:
> 
> https://github.com/open-power/skiboot/commit/fca2b2b839a673a1e52fc6b19ee6d33b2dfbc003
> 
> This resets all links on an NPU which is fine for now as we pass GPUs in
> groups only. Or I missed something?

>From what I can see in
https://github.com/open-power/skiboot/commit/2947eaa14e771e572d4e84bf003318c590c1c7d4
we only fence the bricks in npu2_dev_procedure_reset()
(https://github.com/open-power/skiboot/blob/master/hw/npu2-hw-procedures.c#L937)
which itself is only called from the FLR path and not the code path you point
out above.

The code path above only resets the NTL which I don't believe is sufficient to
prevent HMIs.

- Alistair

>
> 
> 
> > 
> > - Alistair
> > 
> > On Monday, 15 October 2018 6:17:51 PM AEDT Alexey Kardashevskiy wrote:
> >> Ping?
> >>
> >>
> >> On 02/10/2018 13:20, Alexey Kardashevskiy wrote:
> >>> The skiboot firmware has a hot reset handler which fences the NVIDIA V100
> >>> GPU RAM on Witherspoons and makes accesses no-op instead of throwing HMIs:
> >>> https://github.com/open-power/skiboot/commit/fca2b2b839a67
> >>>
> >>> Now we are going to pass V100 via VFIO which most certainly involves
> >>> KVM guests which are often terminated without getting a chance to offline
> >>> GPU RAM so we end up with a running machine with misconfigured memory.
> >>> Accessing this memory produces hardware management interrupts (HMI)
> >>> which bring the host down.
> >>>
> >>> To suppress HMIs, this wires up this hot reset hook to vfio_pci_disable()
> >>> via pci_disable_device() which switches NPU2 to a safe mode and prevents
> >>> HMIs.
> >>>
> >>> Signed-off-by: Alexey Kardashevskiy <aik at ozlabs.ru>
> >>> ---
> >>> Changes:
> >>> v2:
> >>> * updated the commit log
> >>> ---
> >>>  arch/powerpc/platforms/powernv/pci-ioda.c | 10 ++++++++++
> >>>  1 file changed, 10 insertions(+)
> >>>
> >>> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> >>> index cde7102..e37b9cc 100644
> >>> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> >>> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> >>> @@ -3688,6 +3688,15 @@ static void pnv_pci_release_device(struct pci_dev *pdev)
> >>>  		pnv_ioda_release_pe(pe);
> >>>  }
> >>>  
> >>> +static void pnv_npu_disable_device(struct pci_dev *pdev)
> >>> +{
> >>> +	struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
> >>> +	struct eeh_pe *eehpe = edev ? edev->pe : NULL;
> >>> +
> >>> +	if (eehpe && eeh_ops && eeh_ops->reset)
> >>> +		eeh_ops->reset(eehpe, EEH_RESET_HOT);
> >>> +}
> >>> +
> >>>  static void pnv_pci_ioda_shutdown(struct pci_controller *hose)
> >>>  {
> >>>  	struct pnv_phb *phb = hose->private_data;
> >>> @@ -3732,6 +3741,7 @@ static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
> >>>  	.reset_secondary_bus	= pnv_pci_reset_secondary_bus,
> >>>  	.dma_set_mask		= pnv_npu_dma_set_mask,
> >>>  	.shutdown		= pnv_pci_ioda_shutdown,
> >>> +	.disable_device		= pnv_npu_disable_device,
> >>>  };
> >>>  
> >>>  static const struct pci_controller_ops pnv_npu_ocapi_ioda_controller_ops = {
> >>>
> >>
> >>
> > 
> > 
> 
>