[PATCH 03/36] dt-bindings: arm: atmel: Move various sys registers out of SoC binding doc
Rob Herring
robh at kernel.org
Sat Oct 6 02:58:15 AEST 2018
In preparation to convert board-level bindings to json-schema, move
various misc SoC bindings out to their own file.
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: Nicolas Ferre <nicolas.ferre at microchip.com>
Cc: Alexandre Belloni <alexandre.belloni at bootlin.com>
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Signed-off-by: Rob Herring <robh at kernel.org>
---
.../devicetree/bindings/arm/atmel-at91.txt | 170 -----------------
.../devicetree/bindings/arm/atmel-sysregs.txt | 171 ++++++++++++++++++
2 files changed, 171 insertions(+), 170 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/atmel-sysregs.txt
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 31220b54d85d..4bf1b4da7659 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -70,173 +70,3 @@ compatible: must be one of:
- "atmel,samv71q19"
- "atmel,samv71q20"
- "atmel,samv71q21"
-
-Chipid required properties:
-- compatible: Should be "atmel,sama5d2-chipid"
-- reg : Should contain registers location and length
-
-PIT Timer required properties:
-- compatible: Should be "atmel,at91sam9260-pit"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt for the PIT which is the IRQ line
- shared across all System Controller members.
-
-System Timer (ST) required properties:
-- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt for the ST which is the IRQ line
- shared across all System Controller members.
-- clocks: phandle to input clock.
-Its subnodes can be:
-- watchdog: compatible should be "atmel,at91rm9200-wdt"
-
-RSTC Reset Controller required properties:
-- compatible: Should be "atmel,<chip>-rstc".
- <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-Example:
-
- rstc at fffffd00 {
- compatible = "atmel,at91sam9260-rstc";
- reg = <0xfffffd00 0x10>;
- clocks = <&clk32k>;
- };
-
-RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
- "atmel,at91sam9260-sdramc",
- "atmel,at91sam9g45-ddramc",
- "atmel,sama5d3-ddramc",
-- reg: Should contain registers location and length
-
-Examples:
-
- ramc0: ramc at ffffe800 {
- compatible = "atmel,at91sam9g45-ddramc";
- reg = <0xffffe800 0x200>;
- };
-
-SHDWC Shutdown Controller
-
-required properties:
-- compatible: Should be "atmel,<chip>-shdwc".
- <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-optional properties:
-- atmel,wakeup-mode: String, operation mode of the wakeup mode.
- Supported values are: "none", "high", "low", "any".
-- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
-
-optional at91sam9260 properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9rl properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9x5 properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-
-Example:
-
- shdwc at fffffd10 {
- compatible = "atmel,at91sam9260-shdwc";
- reg = <0xfffffd10 0x10>;
- clocks = <&clk32k>;
- };
-
-SHDWC SAMA5D2-Compatible Shutdown Controller
-
-1) shdwc node
-
-required properties:
-- compatible: should be "atmel,sama5d2-shdwc".
-- reg: should contain registers location and length
-- clocks: phandle to input clock.
-- #address-cells: should be one. The cell is the wake-up input index.
-- #size-cells: should be zero.
-
-optional properties:
-
-- debounce-delay-us: minimum wake-up inputs debouncer period in
- microseconds. It's usually a board-related property.
-- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
-
-The node contains child nodes for each wake-up input that the platform uses.
-
-2) input nodes
-
-Wake-up input nodes are usually described in the "board" part of the Device
-Tree. Note also that input 0 is linked to the wake-up pin and is frequently
-used.
-
-Required properties:
-- reg: should contain the wake-up input index [0 - 15].
-
-Optional properties:
-- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
- by the child, forces the wake-up of the core power supply on a high level.
- The default is to be active low.
-
-Example:
-
-On the SoC side:
- shdwc at f8048010 {
- compatible = "atmel,sama5d2-shdwc";
- reg = <0xf8048010 0x10>;
- clocks = <&clk32k>;
- #address-cells = <1>;
- #size-cells = <0>;
- atmel,wakeup-rtc-timer;
- };
-
-On the board side:
- shdwc at f8048010 {
- debounce-delay-us = <976>;
-
- input at 0 {
- reg = <0>;
- };
-
- input at 1 {
- reg = <1>;
- atmel,wakeup-active-high;
- };
- };
-
-Special Function Registers (SFR)
-
-Special Function Registers (SFR) manage specific aspects of the integrated
-memory, bridge implementations, processor and other functionality not controlled
-elsewhere.
-
-required properties:
-- compatible: Should be "atmel,<chip>-sfr", "syscon" or
- "atmel,<chip>-sfrbu", "syscon"
- <chip> can be "sama5d3", "sama5d4" or "sama5d2".
-- reg: Should contain registers location and length
-
- sfr at f0038000 {
- compatible = "atmel,sama5d3-sfr", "syscon";
- reg = <0xf0038000 0x60>;
- };
-
-Security Module (SECUMOD)
-
-The Security Module macrocell provides all necessary secure functions to avoid
-voltage, temperature, frequency and mechanical attacks on the chip. It also
-embeds secure memories that can be scrambled
-
-required properties:
-- compatible: Should be "atmel,<chip>-secumod", "syscon".
- <chip> can be "sama5d2".
-- reg: Should contain registers location and length
-
- secumod at fc040000 {
- compatible = "atmel,sama5d2-secumod", "syscon";
- reg = <0xfc040000 0x100>;
- };
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
new file mode 100644
index 000000000000..4b96608ad692
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -0,0 +1,171 @@
+Atmel system registers
+
+Chipid required properties:
+- compatible: Should be "atmel,sama5d2-chipid"
+- reg : Should contain registers location and length
+
+PIT Timer required properties:
+- compatible: Should be "atmel,at91sam9260-pit"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the PIT which is the IRQ line
+ shared across all System Controller members.
+
+System Timer (ST) required properties:
+- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the ST which is the IRQ line
+ shared across all System Controller members.
+- clocks: phandle to input clock.
+Its subnodes can be:
+- watchdog: compatible should be "atmel,at91rm9200-wdt"
+
+RSTC Reset Controller required properties:
+- compatible: Should be "atmel,<chip>-rstc".
+ <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
+- reg: Should contain registers location and length
+- clocks: phandle to input clock.
+
+Example:
+
+ rstc at fffffd00 {
+ compatible = "atmel,at91sam9260-rstc";
+ reg = <0xfffffd00 0x10>;
+ clocks = <&clk32k>;
+ };
+
+RAMC SDRAM/DDR Controller required properties:
+- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
+ "atmel,at91sam9260-sdramc",
+ "atmel,at91sam9g45-ddramc",
+ "atmel,sama5d3-ddramc",
+- reg: Should contain registers location and length
+
+Examples:
+
+ ramc0: ramc at ffffe800 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffe800 0x200>;
+ };
+
+SHDWC Shutdown Controller
+
+required properties:
+- compatible: Should be "atmel,<chip>-shdwc".
+ <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
+- reg: Should contain registers location and length
+- clocks: phandle to input clock.
+
+optional properties:
+- atmel,wakeup-mode: String, operation mode of the wakeup mode.
+ Supported values are: "none", "high", "low", "any".
+- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
+
+optional at91sam9260 properties:
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
+optional at91sam9rl properties:
+- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
+optional at91sam9x5 properties:
+- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
+
+Example:
+
+ shdwc at fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ clocks = <&clk32k>;
+ };
+
+SHDWC SAMA5D2-Compatible Shutdown Controller
+
+1) shdwc node
+
+required properties:
+- compatible: should be "atmel,sama5d2-shdwc".
+- reg: should contain registers location and length
+- clocks: phandle to input clock.
+- #address-cells: should be one. The cell is the wake-up input index.
+- #size-cells: should be zero.
+
+optional properties:
+
+- debounce-delay-us: minimum wake-up inputs debouncer period in
+ microseconds. It's usually a board-related property.
+- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
+
+The node contains child nodes for each wake-up input that the platform uses.
+
+2) input nodes
+
+Wake-up input nodes are usually described in the "board" part of the Device
+Tree. Note also that input 0 is linked to the wake-up pin and is frequently
+used.
+
+Required properties:
+- reg: should contain the wake-up input index [0 - 15].
+
+Optional properties:
+- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
+ by the child, forces the wake-up of the core power supply on a high level.
+ The default is to be active low.
+
+Example:
+
+On the SoC side:
+ shdwc at f8048010 {
+ compatible = "atmel,sama5d2-shdwc";
+ reg = <0xf8048010 0x10>;
+ clocks = <&clk32k>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,wakeup-rtc-timer;
+ };
+
+On the board side:
+ shdwc at f8048010 {
+ debounce-delay-us = <976>;
+
+ input at 0 {
+ reg = <0>;
+ };
+
+ input at 1 {
+ reg = <1>;
+ atmel,wakeup-active-high;
+ };
+ };
+
+Special Function Registers (SFR)
+
+Special Function Registers (SFR) manage specific aspects of the integrated
+memory, bridge implementations, processor and other functionality not controlled
+elsewhere.
+
+required properties:
+- compatible: Should be "atmel,<chip>-sfr", "syscon" or
+ "atmel,<chip>-sfrbu", "syscon"
+ <chip> can be "sama5d3", "sama5d4" or "sama5d2".
+- reg: Should contain registers location and length
+
+ sfr at f0038000 {
+ compatible = "atmel,sama5d3-sfr", "syscon";
+ reg = <0xf0038000 0x60>;
+ };
+
+Security Module (SECUMOD)
+
+The Security Module macrocell provides all necessary secure functions to avoid
+voltage, temperature, frequency and mechanical attacks on the chip. It also
+embeds secure memories that can be scrambled
+
+required properties:
+- compatible: Should be "atmel,<chip>-secumod", "syscon".
+ <chip> can be "sama5d2".
+- reg: Should contain registers location and length
+
+ secumod at fc040000 {
+ compatible = "atmel,sama5d2-secumod", "syscon";
+ reg = <0xfc040000 0x100>;
+ };
--
2.17.1
More information about the Linuxppc-dev
mailing list