[PATCH v4 28/32] KVM: PPC: Book3S HV: Sanitise hv_regs on nested guest entry

Paul Mackerras paulus at ozlabs.org
Thu Oct 4 21:56:05 AEST 2018


From: Suraj Jitindar Singh <sjitindarsingh at gmail.com>

restore_hv_regs() is used to copy the hv_regs L1 wants to set to run the
nested (L2) guest into the vcpu structure. We need to sanitise these
values to ensure we don't let the L1 guest hypervisor do things we don't
want it to.

We don't let data address watchpoints or completed instruction address
breakpoints be set to match in hypervisor state.

We also don't let L1 enable features in the hypervisor facility status
and control register (HFSCR) for L2 which we have disabled for L1. That
is L2 will get the subset of features which the L0 hypervisor has
enabled for L1 and the features L1 wants to enable for L2. This could
mean we give L1 a hypervisor facility unavailable interrupt for a
facility it thinks it has enabled, however it shouldn't have enabled a
facility it itself doesn't have for the L2 guest.

We sanitise the registers when copying in the L2 hv_regs. We don't need
to sanitise when copying back the L1 hv_regs since these shouldn't be
able to contain invalid values as they're just what was copied out.

Reviewed-by: David Gibson <david at gibson.dropbear.id.au>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh at gmail.com>
Signed-off-by: Paul Mackerras <paulus at ozlabs.org>
---
 arch/powerpc/include/asm/reg.h      |  1 +
 arch/powerpc/kvm/book3s_hv_nested.c | 17 +++++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 6fda746..c9069897 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -415,6 +415,7 @@
 #define   HFSCR_DSCR	__MASK(FSCR_DSCR_LG)
 #define   HFSCR_VECVSX	__MASK(FSCR_VECVSX_LG)
 #define   HFSCR_FP	__MASK(FSCR_FP_LG)
+#define   HFSCR_INTR_CAUSE (ASM_CONST(0xFF) << 56)	/* interrupt cause */
 #define SPRN_TAR	0x32f	/* Target Address Register */
 #define SPRN_LPCR	0x13E	/* LPAR Control Register */
 #define   LPCR_VPM0		ASM_CONST(0x8000000000000000)
diff --git a/arch/powerpc/kvm/book3s_hv_nested.c b/arch/powerpc/kvm/book3s_hv_nested.c
index 1a8c40d..f54f779 100644
--- a/arch/powerpc/kvm/book3s_hv_nested.c
+++ b/arch/powerpc/kvm/book3s_hv_nested.c
@@ -85,6 +85,22 @@ static void save_hv_return_state(struct kvm_vcpu *vcpu, int trap,
 	}
 }
 
+static void sanitise_hv_regs(struct kvm_vcpu *vcpu, struct hv_guest_state *hr)
+{
+	/*
+	 * Don't let L1 enable features for L2 which we've disabled for L1,
+	 * but preserve the interrupt cause field.
+	 */
+	hr->hfscr &= (HFSCR_INTR_CAUSE | vcpu->arch.hfscr);
+
+	/* Don't let data address watchpoint match in hypervisor state */
+	hr->dawrx0 &= ~DAWRX_HYP;
+
+	/* Don't let completed instruction address breakpt match in HV state */
+	if ((hr->ciabr & CIABR_PRIV) == CIABR_PRIV_HYPER)
+		hr->ciabr &= ~CIABR_PRIV;
+}
+
 static void restore_hv_regs(struct kvm_vcpu *vcpu, struct hv_guest_state *hr)
 {
 	struct kvmppc_vcore *vc = vcpu->arch.vcore;
@@ -197,6 +213,7 @@ long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
 	mask = LPCR_DPFD | LPCR_ILE | LPCR_TC | LPCR_AIL | LPCR_LD |
 		LPCR_LPES | LPCR_MER;
 	lpcr = (vc->lpcr & ~mask) | (l2_hv.lpcr & mask);
+	sanitise_hv_regs(vcpu, &l2_hv);
 	restore_hv_regs(vcpu, &l2_hv);
 
 	vcpu->arch.ret = RESUME_GUEST;
-- 
2.7.4



More information about the Linuxppc-dev mailing list