[PATCHv2 3/6] PCI: layerscape: Add the EP mode support

[Lorenzo Pieralisi]

On Mon, Nov 05, 2018 at 04:46:50PM +0800, Xiaowei Bao wrote:
> Add the EP mode support.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com>
> ---
> v2:
>  - Add the SoC specific compatibles.
> 
>  .../devicetree/bindings/pci/layerscape-pci.txt     |    3 +++
>  1 files changed, 3 insertions(+), 0 deletions(-)

Wrong commit $SUBJECT, this is not PCI code, it is a DT binding
update, I will have a look at the rest of the series to see if I
can update this patch or you will do it with the next respin.

Lorenzo

> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> index 66df1e8..9c090c7 100644
> --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> @@ -13,12 +13,15 @@ information.
>  
>  Required properties:
>  - compatible: should contain the platform identifier such as:
> +  RC mode:
>          "fsl,ls1021a-pcie", "snps,dw-pcie"
>          "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
>          "fsl,ls2088a-pcie"
>          "fsl,ls1088a-pcie"
>          "fsl,ls1046a-pcie"
>          "fsl,ls1012a-pcie"
> +  EP mode:
> +        "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
>  - reg: base addresses and lengths of the PCIe controller register blocks.
>  - interrupts: A list of interrupt outputs of the controller. Must contain an
>    entry for each entry in the interrupt-names property.
> -- 
> 1.7.1
>