[PATCH v8 19/20] powerpc/8xx: don't use r12/SPRN_SPRG_SCRATCH2 in TLB Miss handlers

Christophe Leroy christophe.leroy at c-s.fr
Thu Nov 29 19:10:42 AEDT 2018 

This patch reworks the TLB Miss handler in order to not use r12
register, hence avoiding having to save it into SPRN_SPRG_SCRATCH2.

In the DAR Fixup code we can now use SPRN_M_TW, freeing
SPRN_SPRG_SCRATCH2.

Then SPRN_SPRG_SCRATCH2 may be used for something else in the future.

Signed-off-by: Christophe Leroy <christophe.leroy at c-s.fr>
---
 arch/powerpc/kernel/head_8xx.S | 110 ++++++++++++++++++-----------------------
 1 file changed, 49 insertions(+), 61 deletions(-)

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 85fb4b8bf6c7..0a4f8a9c85ff 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -302,90 +302,87 @@ SystemCall:
  */
 
 #ifdef CONFIG_8xx_CPU15
-#define INVALIDATE_ADJACENT_PAGES_CPU15(tmp, addr)	\
-	addi	tmp, addr, PAGE_SIZE;	\
-	tlbie	tmp;			\
-	addi	tmp, addr, -PAGE_SIZE;	\
-	tlbie	tmp
+#define INVALIDATE_ADJACENT_PAGES_CPU15(addr)	\
+	addi	addr, addr, PAGE_SIZE;	\
+	tlbie	addr;			\
+	addi	addr, addr, -(PAGE_SIZE << 1);	\
+	tlbie	addr;			\
+	addi	addr, addr, PAGE_SIZE
 #else
-#define INVALIDATE_ADJACENT_PAGES_CPU15(tmp, addr)
+#define INVALIDATE_ADJACENT_PAGES_CPU15(addr)
 #endif
 
 InstructionTLBMiss:
 	mtspr	SPRN_SPRG_SCRATCH0, r10
+#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP)
 	mtspr	SPRN_SPRG_SCRATCH1, r11
-#ifdef ITLB_MISS_KERNEL
-	mtspr	SPRN_SPRG_SCRATCH2, r12
 #endif
 
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
 	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
-	INVALIDATE_ADJACENT_PAGES_CPU15(r11, r10)
+	INVALIDATE_ADJACENT_PAGES_CPU15(r10)
 	mtspr	SPRN_MD_EPN, r10
 	/* Only modules will cause ITLB Misses as we always
 	 * pin the first 8MB of kernel memory */
 #ifdef ITLB_MISS_KERNEL
-	mfcr	r12
+	mfcr	r11
 #if defined(SIMPLE_KERNEL_ADDRESS) && defined(CONFIG_PIN_TLB_TEXT)
-	andis.	r11, r10, 0x8000	/* Address >= 0x80000000 */
+	cmpi	cr0, r10, 0	/* Address >= 0x80000000 */
 #else
-	rlwinm	r11, r10, 16, 0xfff8
-	cmpli	cr0, r11, PAGE_OFFSET at h
+	rlwinm	r10, r10, 16, 0xfff8
+	cmpli	cr0, r10, PAGE_OFFSET at h
 #ifndef CONFIG_PIN_TLB_TEXT
 	/* It is assumed that kernel code fits into the first 8M page */
-0:	cmpli	cr7, r11, (PAGE_OFFSET + 0x0800000)@h
+0:	cmpli	cr7, r10, (PAGE_OFFSET + 0x0800000)@h
 	patch_site	0b, patch__itlbmiss_linmem_top
 #endif
 #endif
 #endif
-	mfspr	r11, SPRN_M_TWB	/* Get level 1 table */
+	mfspr	r10, SPRN_M_TWB	/* Get level 1 table */
 #ifdef ITLB_MISS_KERNEL
 #if defined(SIMPLE_KERNEL_ADDRESS) && defined(CONFIG_PIN_TLB_TEXT)
-	beq+	3f
+	bge+	3f
 #else
 	blt+	3f
 #endif
 #ifndef CONFIG_PIN_TLB_TEXT
 	blt	cr7, ITLBMissLinear
 #endif
-	rlwinm	r11, r11, 0, 20, 31
-	oris	r11, r11, (swapper_pg_dir - PAGE_OFFSET)@ha
+	rlwinm	r10, r10, 0, 20, 31
+	oris	r10, r10, (swapper_pg_dir - PAGE_OFFSET)@ha
 3:
 #endif
-	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
+	lwz	r10, (swapper_pg_dir-PAGE_OFFSET)@l(r10)	/* Get level 1 entry */
+	mtspr	SPRN_MI_TWC, r10	/* Set segment attributes */
 
-	mtspr	SPRN_MD_TWC, r11
+	mtspr	SPRN_MD_TWC, r10
 	mfspr	r10, SPRN_MD_TWC
 	lwz	r10, 0(r10)	/* Get the pte */
 #ifdef ITLB_MISS_KERNEL
-	mtcr	r12
+	mtcr	r11
 #endif
-	/* Load the MI_TWC with the attributes for this "segment." */
-	mtspr	SPRN_MI_TWC, r11	/* Set segment attributes */
-
 #ifdef CONFIG_SWAP
 	rlwinm	r11, r10, 32-5, _PAGE_PRESENT
 	and	r11, r11, r10
 	rlwimi	r10, r11, 0, _PAGE_PRESENT
 #endif
-	li	r11, RPN_PATTERN | 0x200
 	/* The Linux PTE won't go exactly into the MMU TLB.
 	 * Software indicator bits 20 and 23 must be clear.
 	 * Software indicator bits 22, 24, 25, 26, and 27 must be
 	 * set.  All other Linux PTE bits control the behavior
 	 * of the MMU.
 	 */
-	rlwimi	r11, r10, 4, 0x0400	/* Copy _PAGE_EXEC into bit 21 */
-	rlwimi	r10, r11, 0, 0x0ff0	/* Set 22, 24-27, clear 20,23 */
+	rlwimi	r10, r10, 0, 0x0f00	/* Clear bits 20-23 */
+	rlwimi	r10, r10, 4, 0x0400	/* Copy _PAGE_EXEC into bit 21 */
+	ori	r10, r10, RPN_PATTERN | 0x200 /* Set 22 and 24-27 */
 	mtspr	SPRN_MI_RPN, r10	/* Update TLB entry */
 
 	/* Restore registers */
 0:	mfspr	r10, SPRN_SPRG_SCRATCH0
+#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP)
 	mfspr	r11, SPRN_SPRG_SCRATCH1
-#ifdef ITLB_MISS_KERNEL
-	mfspr	r12, SPRN_SPRG_SCRATCH2
 #endif
 	rfi
 	patch_site	0b, patch__itlbmiss_exit_1
@@ -396,9 +393,8 @@ InstructionTLBMiss:
 	addi	r10, r10, 1
 	stw	r10, (itlb_miss_counter - PAGE_OFFSET)@l(0)
 	mfspr	r10, SPRN_SPRG_SCRATCH0
+#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP)
 	mfspr	r11, SPRN_SPRG_SCRATCH1
-#ifdef ITLB_MISS_KERNEL
-	mfspr	r12, SPRN_SPRG_SCRATCH2
 #endif
 	rfi
 #endif
@@ -407,40 +403,37 @@ InstructionTLBMiss:
 DataStoreTLBMiss:
 	mtspr	SPRN_SPRG_SCRATCH0, r10
 	mtspr	SPRN_SPRG_SCRATCH1, r11
-	mtspr	SPRN_SPRG_SCRATCH2, r12
-	mfcr	r12
+	mfcr	r11
 
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
 	mfspr	r10, SPRN_MD_EPN
-	rlwinm	r11, r10, 16, 0xfff8
-	cmpli	cr0, r11, PAGE_OFFSET at h
-	mfspr	r11, SPRN_M_TWB	/* Get level 1 table */
-	blt+	3f
-	rlwinm	r11, r10, 16, 0xfff8
+	rlwinm	r10, r10, 16, 0xfff8
+	cmpli	cr0, r10, PAGE_OFFSET at h
 #ifndef CONFIG_PIN_TLB_IMMR
-	cmpli	cr0, r11, VIRT_IMMR_BASE at h
+	cmpli	cr6, r10, VIRT_IMMR_BASE at h
 #endif
-0:	cmpli	cr7, r11, (PAGE_OFFSET + 0x1800000)@h
+0:	cmpli	cr7, r10, (PAGE_OFFSET + 0x1800000)@h
 	patch_site	0b, patch__dtlbmiss_linmem_top
+
+	mfspr	r10, SPRN_M_TWB	/* Get level 1 table */
+	blt+	3f
 #ifndef CONFIG_PIN_TLB_IMMR
-0:	beq-	DTLBMissIMMR
+0:	beq-	cr6, DTLBMissIMMR
 	patch_site	0b, patch__dtlbmiss_immr_jmp
 #endif
 	blt	cr7, DTLBMissLinear
-	mfspr	r11, SPRN_M_TWB	/* Get level 1 table */
-	rlwinm	r11, r11, 0, 20, 31
-	oris	r11, r11, (swapper_pg_dir - PAGE_OFFSET)@ha
+	rlwinm	r10, r10, 0, 20, 31
+	oris	r10, r10, (swapper_pg_dir - PAGE_OFFSET)@ha
 3:
-	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
+	mtcr	r11
+	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r10)	/* Get level 1 entry */
 
 	mtspr	SPRN_MD_TWC, r11
 	mfspr	r10, SPRN_MD_TWC
 	lwz	r10, 0(r10)	/* Get the pte */
 
-	mtcr	r12
-
 	/* Insert the Guarded flag into the TWC from the Linux PTE.
 	 * It is bit 27 of both the Linux PTE and the TWC (at least
 	 * I got that right :-).  It will be better when we can put
@@ -478,7 +471,6 @@ DataStoreTLBMiss:
 
 0:	mfspr	r10, SPRN_SPRG_SCRATCH0
 	mfspr	r11, SPRN_SPRG_SCRATCH1
-	mfspr	r12, SPRN_SPRG_SCRATCH2
 	rfi
 	patch_site	0b, patch__dtlbmiss_exit_1
 
@@ -489,7 +481,6 @@ DataStoreTLBMiss:
 	stw	r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0)
 	mfspr	r10, SPRN_SPRG_SCRATCH0
 	mfspr	r11, SPRN_SPRG_SCRATCH1
-	mfspr	r12, SPRN_SPRG_SCRATCH2
 	rfi
 #endif
 
@@ -597,7 +588,7 @@ InstructionBreakpoint:
  * not enough space in the DataStoreTLBMiss area.
  */
 DTLBMissIMMR:
-	mtcr	r12
+	mtcr	r11
 	/* Set 512k byte guarded page and mark it valid */
 	li	r10, MD_PS512K | MD_GUARDED | MD_SVALID
 	mtspr	SPRN_MD_TWC, r10
@@ -612,16 +603,15 @@ DTLBMissIMMR:
 
 0:	mfspr	r10, SPRN_SPRG_SCRATCH0
 	mfspr	r11, SPRN_SPRG_SCRATCH1
-	mfspr	r12, SPRN_SPRG_SCRATCH2
 	rfi
 	patch_site	0b, patch__dtlbmiss_exit_2
 
 DTLBMissLinear:
-	mtcr	r12
+	mtcr	r11
 	/* Set 8M byte page and mark it valid */
 	li	r11, MD_PS8MEG | MD_SVALID
 	mtspr	SPRN_MD_TWC, r11
-	rlwinm	r10, r10, 0, 0x0f800000	/* 8xx supports max 256Mb RAM */
+	rlwinm	r10, r10, 20, 0x0f800000	/* 8xx supports max 256Mb RAM */
 	ori	r10, r10, 0xf0 | MD_SPS16K | _PAGE_SH | _PAGE_DIRTY | \
 			  _PAGE_PRESENT
 	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
@@ -631,24 +621,22 @@ DTLBMissLinear:
 
 0:	mfspr	r10, SPRN_SPRG_SCRATCH0
 	mfspr	r11, SPRN_SPRG_SCRATCH1
-	mfspr	r12, SPRN_SPRG_SCRATCH2
 	rfi
 	patch_site	0b, patch__dtlbmiss_exit_3
 
 #ifndef CONFIG_PIN_TLB_TEXT
 ITLBMissLinear:
-	mtcr	r12
+	mtcr	r11
 	/* Set 8M byte page and mark it valid */
 	li	r11, MI_PS8MEG | MI_SVALID
 	mtspr	SPRN_MI_TWC, r11
-	rlwinm	r10, r10, 0, 0x0f800000	/* 8xx supports max 256Mb RAM */
+	rlwinm	r10, r10, 20, 0x0f800000	/* 8xx supports max 256Mb RAM */
 	ori	r10, r10, 0xf0 | MI_SPS16K | _PAGE_SH | _PAGE_DIRTY | \
 			  _PAGE_PRESENT
 	mtspr	SPRN_MI_RPN, r10	/* Update TLB entry */
 
 0:	mfspr	r10, SPRN_SPRG_SCRATCH0
 	mfspr	r11, SPRN_SPRG_SCRATCH1
-	mfspr	r12, SPRN_SPRG_SCRATCH2
 	rfi
 	patch_site	0b, patch__itlbmiss_exit_2
 #endif
@@ -660,7 +648,7 @@ ITLBMissLinear:
  /* define if you don't want to use self modifying code */
 #define NO_SELF_MODIFYING_CODE
 FixupDAR:/* Entry point for dcbx workaround. */
-	mtspr	SPRN_SPRG_SCRATCH2, r10
+	mtspr	SPRN_M_TW, r10
 	/* fetch instruction from memory. */
 	mfspr	r10, SPRN_SRR0
 	mtspr	SPRN_MD_EPN, r10
@@ -705,7 +693,7 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	beq+	142f
 	cmpwi	cr0, r10, 1964	/* Is icbi? */
 	beq+	142f
-141:	mfspr	r10,SPRN_SPRG_SCRATCH2
+141:	mfspr	r10,SPRN_M_TW
 	b	DARFixed	/* Nope, go back to normal TLB processing */
 
 200:
@@ -740,7 +728,7 @@ modified_instr:
 	bne+	143f
 	subf	r10,r0,r10	/* r10=r10-r0, only if reg RA is r0 */
 143:	mtdar	r10		/* store faulting EA in DAR */
-	mfspr	r10,SPRN_SPRG_SCRATCH2
+	mfspr	r10,SPRN_M_TW
 	b	DARFixed	/* Go back to normal TLB handling */
 #else
 	mfctr	r10
@@ -794,7 +782,7 @@ modified_instr:
 	mfdar	r11
 	mtctr	r11			/* restore ctr reg from DAR */
 	mtdar	r10			/* save fault EA to DAR */
-	mfspr	r10,SPRN_SPRG_SCRATCH2
+	mfspr	r10,SPRN_M_TW
 	b	DARFixed		/* Go back to normal TLB handling */
 
 	/* special handling for r10,r11 since these are modified already */
-- 
2.13.3

More information about the Linuxppc-dev mailing list