[PATCH kernel v3 14/22] powerpc/iommu_api: Move IOMMU groups setup to a single place
David Gibson
david at gibson.dropbear.id.au
Mon Nov 19 11:15:29 AEDT 2018
On Tue, Nov 13, 2018 at 07:28:15PM +1100, Alexey Kardashevskiy wrote:
> Registering new IOMMU groups and adding devices to them are separated in
> code and the latter is dug in the DMA setup code which it does not
> really belong to.
>
> This moved IOMMU groups setup to a separate helper which registers a group
> and adds devices as before. This does not make a difference as IOMMU
> groups are not used anyway; the only dependency here is that
> iommu_add_device() requires a valid pointer to an iommu_table
> (set by set_iommu_table_base()).
>
> To keep the old behaviour, this does not add new IOMMU groups for PEs
> with no DMA weigth and also skips NVLINK bridges which do not have
> pci_controller_ops::setup_bridge (the normal way of adding PEs).
>
> Signed-off-by: Alexey Kardashevskiy <aik at ozlabs.ru>
Reviewed-by: David Gibson <david at gibson.dropbear.id.au>
> ---
> arch/powerpc/platforms/powernv/pci-ioda.c | 80 +++++++++++++++++++----
> 1 file changed, 66 insertions(+), 14 deletions(-)
>
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index f36a802..7f4904a 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -1269,6 +1269,8 @@ static void pnv_ioda_setup_npu_PEs(struct pci_bus *bus)
> pnv_ioda_setup_npu_PE(pdev);
> }
>
> +static void pnv_ioda_setup_bus_iommu_group(struct pnv_ioda_pe *pe);
> +
> static void pnv_pci_ioda_setup_PEs(void)
> {
> struct pci_controller *hose;
> @@ -1591,6 +1593,7 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
> mutex_unlock(&phb->ioda.pe_list_mutex);
>
> pnv_pci_ioda2_setup_dma_pe(phb, pe);
> + pnv_ioda_setup_bus_iommu_group(pe);
> }
> }
>
> @@ -1930,21 +1933,16 @@ static u64 pnv_pci_ioda_dma_get_required_mask(struct pci_dev *pdev)
> return mask;
> }
>
> -static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe,
> - struct pci_bus *bus,
> - bool add_to_group)
> +static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
> {
> struct pci_dev *dev;
>
> list_for_each_entry(dev, &bus->devices, bus_list) {
> set_iommu_table_base(&dev->dev, pe->table_group.tables[0]);
> set_dma_offset(&dev->dev, pe->tce_bypass_base);
> - if (add_to_group)
> - iommu_add_device(&pe->table_group, &dev->dev);
>
> if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate)
> - pnv_ioda_setup_bus_dma(pe, dev->subordinate,
> - add_to_group);
> + pnv_ioda_setup_bus_dma(pe, dev->subordinate);
> }
> }
>
> @@ -2374,7 +2372,7 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
> iommu_init_table(tbl, phb->hose->node);
>
> if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))
> - pnv_ioda_setup_bus_dma(pe, pe->pbus, true);
> + pnv_ioda_setup_bus_dma(pe, pe->pbus);
>
> return;
> fail:
> @@ -2607,7 +2605,7 @@ static void pnv_ioda2_take_ownership(struct iommu_table_group *table_group)
> pnv_pci_ioda2_set_bypass(pe, false);
> pnv_pci_ioda2_unset_window(&pe->table_group, 0);
> if (pe->pbus)
> - pnv_ioda_setup_bus_dma(pe, pe->pbus, false);
> + pnv_ioda_setup_bus_dma(pe, pe->pbus);
> iommu_tce_table_put(tbl);
> }
>
> @@ -2618,7 +2616,7 @@ static void pnv_ioda2_release_ownership(struct iommu_table_group *table_group)
>
> pnv_pci_ioda2_setup_default_config(pe);
> if (pe->pbus)
> - pnv_ioda_setup_bus_dma(pe, pe->pbus, false);
> + pnv_ioda_setup_bus_dma(pe, pe->pbus);
> }
>
> static struct iommu_table_group_ops pnv_pci_ioda2_ops = {
> @@ -2735,12 +2733,68 @@ static struct iommu_table_group_ops pnv_pci_ioda2_npu_ops = {
> .release_ownership = pnv_ioda2_release_ownership,
> };
>
> +static void pnv_ioda_setup_bus_iommu_group_add_devices(struct pnv_ioda_pe *pe,
> + struct pci_bus *bus)
> +{
> + struct pci_dev *dev;
> +
> + list_for_each_entry(dev, &bus->devices, bus_list) {
> + iommu_add_device(&pe->table_group, &dev->dev);
> +
> + if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate)
> + pnv_ioda_setup_bus_iommu_group_add_devices(pe,
> + dev->subordinate);
> + }
> +}
> +
> +static void pnv_ioda_setup_bus_iommu_group(struct pnv_ioda_pe *pe)
> +{
> + if (!pnv_pci_ioda_pe_dma_weight(pe))
> + return;
> +
> + iommu_register_group(&pe->table_group, pe->phb->hose->global_number,
> + pe->pe_number);
> +
> + /*
> + * set_iommu_table_base(&pe->pdev->dev, tbl) should have been called
> + * by now
> + */
> + if (pe->flags & PNV_IODA_PE_DEV)
> + iommu_add_device(&pe->table_group, &pe->pdev->dev);
> + else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))
> + pnv_ioda_setup_bus_iommu_group_add_devices(pe, pe->pbus);
> +}
> +
> static void pnv_pci_ioda_setup_iommu_api(void)
> {
> struct pci_controller *hose, *tmp;
> struct pnv_phb *phb;
> struct pnv_ioda_pe *pe, *gpe;
>
> + /*
> + * There are 4 types of PEs:
> + * - PNV_IODA_PE_BUS: a downstream port with an adapter,
> + * created from pnv_pci_setup_bridge();
> + * - PNV_IODA_PE_BUS_ALL: a PCI-PCIX bridge with devices behind it,
> + * created from pnv_pci_setup_bridge();
> + * - PNV_IODA_PE_VF: a SRIOV virtual function,
> + * created from pnv_pcibios_sriov_enable();
> + * - PNV_IODA_PE_DEV: an NPU or OCAPI device,
> + * created from pnv_pci_ioda_fixup().
> + *
> + * Normally a PE is represented by an IOMMU group, however for
> + * devices with side channels the groups need to be more strict.
> + */
> + list_for_each_entry(hose, &hose_list, list_node) {
> + phb = hose->private_data;
> +
> + if (phb->type == PNV_PHB_NPU_NVLINK)
> + continue;
> +
> + list_for_each_entry(pe, &phb->ioda.pe_list, list)
> + pnv_ioda_setup_bus_iommu_group(pe);
> + }
> +
> /*
> * Now we have all PHBs discovered, time to add NPU devices to
> * the corresponding IOMMU groups.
> @@ -2759,6 +2813,7 @@ static void pnv_pci_ioda_setup_iommu_api(void)
> }
> }
> #else /* !CONFIG_IOMMU_API */
> +static void pnv_ioda_setup_bus_iommu_group(struct pnv_ioda_pe *pe) { }
> static void pnv_pci_ioda_setup_iommu_api(void) { };
> #endif
>
> @@ -2801,9 +2856,6 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
> /* TVE #1 is selected by PCI address bit 59 */
> pe->tce_bypass_base = 1ull << 59;
>
> - iommu_register_group(&pe->table_group, phb->hose->global_number,
> - pe->pe_number);
> -
> /* The PE will reserve all possible 32-bits space */
> pe_info(pe, "Setting up 32-bit TCE table at 0..%08x\n",
> phb->ioda.m32_pci_base);
> @@ -2824,7 +2876,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
> return;
>
> if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))
> - pnv_ioda_setup_bus_dma(pe, pe->pbus, true);
> + pnv_ioda_setup_bus_dma(pe, pe->pbus);
> }
>
> #ifdef CONFIG_PCI_MSI
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20181119/af8533f6/attachment-0001.sig>
More information about the Linuxppc-dev
mailing list