[PATCH kernel v3 07/22] powerpc/powernv/npu: Move OPAL calls away from context manipulation
Alistair Popple
alistair at popple.id.au
Wed Nov 14 15:57:37 AEDT 2018
> - /*
> - * Setup the NPU context table for a particular GPU. These need to be
> - * per-GPU as we need the tables to filter ATSDs when there are no
> - * active contexts on a particular GPU. It is safe for these to be
> - * called concurrently with destroy as the OPAL call takes appropriate
> - * locks and refcounts on init/destroy.
> - */
> - rc = opal_npu_init_context(nphb->opal_id, mm->context.id, flags,
> - PCI_DEVID(gpdev->bus->number, gpdev->devfn));
> - if (rc < 0)
> - return ERR_PTR(-ENOSPC);
> -
This will prevent any drivers from setting up contexts with different MSR
values (which is what the flags argument is for) than a standard userspace
context (MSR_DR | MSR_PR | MSR_HV). In practice this currently never happens
and I'm unsure if that's ever likely to change.
We should at least return an error if flags != (MSR_DR | MSR_PR | MSR_HV).
> /*
> * We store the npu pci device so we can more easily get at the
> * associated npus.
> @@ -755,9 +738,6 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev
> *gpdev, if (npu_context->release_cb != cb ||
> npu_context->priv != priv) {
> spin_unlock(&npu_context_lock);
> - opal_npu_destroy_context(nphb->opal_id, mm->context.id,
> - PCI_DEVID(gpdev->bus->number,
> - gpdev->devfn));
> return ERR_PTR(-EINVAL);
> }
>
> @@ -783,9 +763,6 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev
> *gpdev,
>
> if (rc) {
> kfree(npu_context);
> - opal_npu_destroy_context(nphb->opal_id, mm->context.id,
> - PCI_DEVID(gpdev->bus->number,
> - gpdev->devfn));
> return ERR_PTR(rc);
> }
>
> @@ -838,7 +815,6 @@ void pnv_npu2_destroy_context(struct npu_context
> *npu_context, struct pci_dev *gpdev)
> {
> int removed;
> - struct pnv_phb *nphb;
> struct npu *npu;
> struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
> struct device_node *nvlink_dn;
> @@ -847,10 +823,6 @@ void pnv_npu2_destroy_context(struct npu_context
> *npu_context, if (WARN_ON(!npdev))
> return;
>
> - if (!firmware_has_feature(FW_FEATURE_OPAL))
> - return;
> -
> - nphb = pci_bus_to_host(npdev->bus)->private_data;
> npu = npdev_to_npu(npdev);
> if (!npu)
> return;
> @@ -859,8 +831,6 @@ void pnv_npu2_destroy_context(struct npu_context
> *npu_context, &nvlink_index)))
> return;
> WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], NULL);
> - opal_npu_destroy_context(nphb->opal_id, npu_context->mm->context.id,
> - PCI_DEVID(gpdev->bus->number, gpdev->devfn));
> spin_lock(&npu_context_lock);
> removed = kref_put(&npu_context->kref, pnv_npu2_release_context);
> spin_unlock(&npu_context_lock);
> @@ -892,9 +862,6 @@ int pnv_npu2_handle_fault(struct npu_context *context,
> uintptr_t *ea, /* mmap_sem should be held so the struct_mm must be present
> */
> struct mm_struct *mm = context->mm;
>
> - if (!firmware_has_feature(FW_FEATURE_OPAL))
> - return -ENODEV;
> -
> WARN_ON(!rwsem_is_locked(&mm->mmap_sem));
>
> for (i = 0; i < count; i++) {
> @@ -923,15 +890,11 @@ int pnv_npu2_handle_fault(struct npu_context *context,
> uintptr_t *ea, }
> EXPORT_SYMBOL(pnv_npu2_handle_fault);
>
> -int pnv_npu2_init(struct pnv_phb *phb)
> +int pnv_npu2_init(struct pci_controller *hose)
> {
> unsigned int i;
> u64 mmio_atsd;
> - struct device_node *dn;
> - struct pci_dev *gpdev;
> static int npu_index;
> - uint64_t rc = 0;
> - struct pci_controller *hose = phb->hose;
> struct npu *npu;
> int ret;
>
> @@ -940,18 +903,6 @@ int pnv_npu2_init(struct pnv_phb *phb)
> return -ENOMEM;
>
> npu->nmmu_flush = of_property_read_bool(hose->dn, "ibm,nmmu-flush");
> - for_each_child_of_node(phb->hose->dn, dn) {
> - gpdev = pnv_pci_get_gpu_dev(get_pci_dev(dn));
> - if (gpdev) {
> - rc = opal_npu_map_lpar(phb->opal_id,
> - PCI_DEVID(gpdev->bus->number, gpdev->devfn),
> - 0, 0);
> - if (rc)
> - dev_err(&gpdev->dev,
> - "Error %lld mapping device to LPAR\n",
> - rc);
> - }
> - }
>
> for (i = 0; !of_property_read_u64_index(hose->dn, "ibm,mmio-atsd",
> i, &mmio_atsd); i++)
> @@ -981,3 +932,57 @@ int pnv_npu2_init(struct pnv_phb *phb)
>
> return ret;
> }
> +
> +int pnv_npu2_map_lpar_dev(struct pci_dev *gpdev, unsigned int lparid,
> + unsigned long msr)
> +{
> + int ret;
> + struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
> + struct pci_controller *hose;
> + struct pnv_phb *nphb;
> +
> + if (!npdev)
> + return -ENODEV;
> +
> + hose = pci_bus_to_host(npdev->bus);
> + nphb = hose->private_data;
> +
> + dev_dbg(&gpdev->dev, "Map LPAR opalid=%llu lparid=%u\n",
> + nphb->opal_id, lparid);
> + /*
> + * Currently we only support radix and non-zero LPCR only makes sense
> + * for hash tables so skiboot expects the LPCR parameter to be a zero.
> + */
> + ret = opal_npu_map_lpar(nphb->opal_id,
> + PCI_DEVID(gpdev->bus->number, gpdev->devfn), lparid,
> + 0 /* LPCR bits */);
> + if (ret) {
> + dev_err(&gpdev->dev, "Error %d mapping device to LPAR\n", ret);
> + return ret;
> + }
> +
> + dev_dbg(&gpdev->dev, "init context opalid=%llu msr=%lx\n",
> + nphb->opal_id, msr);
> + ret = opal_npu_init_context(nphb->opal_id, 0/*__unused*/, msr,
> + PCI_DEVID(gpdev->bus->number, gpdev->devfn));
> + if (ret < 0)
> + dev_err(&gpdev->dev, "Failed to init context: %d\n", ret);
> + else
> + ret = 0;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(pnv_npu2_map_lpar_dev);
> +
> +void pnv_npu2_map_lpar(struct pnv_ioda_pe *gpe, unsigned long msr)
> +{
> + int ret;
> + struct pci_dev *gpdev;
> +
> + list_for_each_entry(gpdev, &gpe->pbus->devices, bus_list) {
> + ret = pnv_npu2_map_lpar_dev(gpdev, 0, msr);
> + if (ret < 0)
> + dev_err(&gpdev->dev, "Failed to init context: %d\n",
> + ret);
> + }
> +}
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c
> b/arch/powerpc/platforms/powernv/pci-ioda.c index c78c204..ec235ca 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -1271,19 +1271,20 @@ static void pnv_ioda_setup_npu_PEs(struct pci_bus
> *bus)
>
> static void pnv_pci_ioda_setup_PEs(void)
> {
> - struct pci_controller *hose, *tmp;
> + struct pci_controller *hose;
> struct pnv_phb *phb;
> struct pci_bus *bus;
> struct pci_dev *pdev;
> + struct pnv_ioda_pe *pe;
>
> - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
> + list_for_each_entry(hose, &hose_list, list_node) {
> phb = hose->private_data;
> if (phb->type == PNV_PHB_NPU_NVLINK) {
> /* PE#0 is needed for error reporting */
> pnv_ioda_reserve_pe(phb, 0);
> pnv_ioda_setup_npu_PEs(hose->bus);
> if (phb->model == PNV_PHB_MODEL_NPU2)
> - pnv_npu2_init(phb);
> + pnv_npu2_init(hose);
> }
> if (phb->type == PNV_PHB_NPU_OCAPI) {
> bus = hose->bus;
> @@ -1291,6 +1292,14 @@ static void pnv_pci_ioda_setup_PEs(void)
> pnv_ioda_setup_dev_PE(pdev);
> }
> }
> + list_for_each_entry(hose, &hose_list, list_node) {
> + phb = hose->private_data;
> + if (phb->type != PNV_PHB_IODA2)
> + continue;
> +
> + list_for_each_entry(pe, &phb->ioda.pe_list, list)
> + pnv_npu2_map_lpar(pe, MSR_DR | MSR_PR | MSR_HV);
> + }
> }
>
> #ifdef CONFIG_PCI_IOV
More information about the Linuxppc-dev
mailing list