[PATCH kernel 4/5] powerpc/powernv/npu: Factor out OPAL calls from context manipulation
David Gibson
david at gibson.dropbear.id.au
Thu Nov 8 16:05:40 AEDT 2018
On Mon, Oct 15, 2018 at 08:33:00PM +1100, Alexey Kardashevskiy wrote:
> At the moment the NPU context init/destroy code calls OPAL. The init
> handler in OPAL configures the NPU to pass ATS requests to nested MMU,
> the destroy handler does nothing besides sanity checks.
>
> Since the init handler programs the NPU with a wildcard for LPID/PID,
> this can be done at the point where a GPU is mapped to an LPAR; it also
> makes calling opal_npu_destroy_context() unnecessary in this context
> (this will change with VFIO later though).
I think this wants a bit more explanation. It certainly makes me
nervous removing the destroy_context calls with nothing replacing
them.
> Also, the pnv_npu2_init() helper does not really need to call OPAL as
> well as it inialized an NPU structure and does not interact with GPU or
> NPU at that moment.
>
> This moves OPAL calls to a separate helper. With this change, the API
> for GPUs does not do any OPAL calls and therefore can be used by both
> pseries and powernv platforms. The new pnv_npu2_map_lpar_phb() helper
> should be called on powernv only as it does OPAL calls and it takes
> an MSR mask which NPU adds to ATS requests so nested MMU knows what
> translations are permitted; the VFIO/KVM will not set MSR_HV.
>
> This removes the check for FW_FEATURE_OPAL as pnv_npu2_init_context/
> pnv_npu2_release_context/pnv_npu2_init do not call OPAL anymore.
>
> Signed-off-by: Alexey Kardashevskiy <aik at ozlabs.ru>
> ---
> arch/powerpc/include/asm/pci.h | 1 +
> arch/powerpc/platforms/powernv/pci.h | 2 +-
> arch/powerpc/platforms/powernv/npu-dma.c | 100 +++++++++++++++---------------
> arch/powerpc/platforms/powernv/pci-ioda.c | 7 ++-
> 4 files changed, 57 insertions(+), 53 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
> index 1a96075..f196df6 100644
> --- a/arch/powerpc/include/asm/pci.h
> +++ b/arch/powerpc/include/asm/pci.h
> @@ -130,5 +130,6 @@ extern void pcibios_scan_phb(struct pci_controller *hose);
> extern struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev);
> extern struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index);
> extern void pnv_npu2_devices_init(void);
> +extern int pnv_npu2_init(struct pci_controller *hose);
>
> #endif /* __ASM_POWERPC_PCI_H */
> diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
> index 3b7617d..ca2ce4b 100644
> --- a/arch/powerpc/platforms/powernv/pci.h
> +++ b/arch/powerpc/platforms/powernv/pci.h
> @@ -224,7 +224,7 @@ extern long pnv_npu_set_window(struct pnv_ioda_pe *npe, int num,
> extern long pnv_npu_unset_window(struct pnv_ioda_pe *npe, int num);
> extern void pnv_npu_take_ownership(struct pnv_ioda_pe *npe);
> extern void pnv_npu_release_ownership(struct pnv_ioda_pe *npe);
> -extern int pnv_npu2_init(struct pnv_phb *phb);
> +extern void pnv_npu2_map_lpar_phb(struct pnv_phb *nphb, unsigned long msr);
>
> /* pci-ioda-tce.c */
> #define POWERNV_IOMMU_DEFAULT_LEVELS 1
> diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
> index cb2b4f9..677f30a 100644
> --- a/arch/powerpc/platforms/powernv/npu-dma.c
> +++ b/arch/powerpc/platforms/powernv/npu-dma.c
> @@ -762,7 +762,6 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
> u32 nvlink_index;
> struct device_node *nvlink_dn;
> struct mm_struct *mm = current->mm;
> - struct pnv_phb *nphb;
> struct npu *npu;
> struct npu_context *npu_context;
>
> @@ -772,9 +771,6 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
> */
> struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
>
> - if (!firmware_has_feature(FW_FEATURE_OPAL))
> - return ERR_PTR(-ENODEV);
> -
> if (!npdev)
> /* No nvlink associated with this GPU device */
> return ERR_PTR(-ENODEV);
> @@ -792,22 +788,9 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
> return ERR_PTR(-EINVAL);
> }
>
> - nphb = pci_bus_to_host(npdev->bus)->private_data;
> npu = npdev_to_npu(npdev);
>
> /*
> - * Setup the NPU context table for a particular GPU. These need to be
> - * per-GPU as we need the tables to filter ATSDs when there are no
> - * active contexts on a particular GPU. It is safe for these to be
> - * called concurrently with destroy as the OPAL call takes appropriate
> - * locks and refcounts on init/destroy.
> - */
> - rc = opal_npu_init_context(nphb->opal_id, mm->context.id,
> flags,
AFAICT this was the only use of 'flags' in this function, so it should
be removed from the signature, no?
> - PCI_DEVID(gpdev->bus->number, gpdev->devfn));
> - if (rc < 0)
> - return ERR_PTR(-ENOSPC);
> -
> - /*
> * We store the npu pci device so we can more easily get at the
> * associated npus.
> */
> @@ -817,9 +800,6 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
> if (npu_context->release_cb != cb ||
> npu_context->priv != priv) {
> spin_unlock(&npu2_devices.context_lock);
> - opal_npu_destroy_context(nphb->opal_id, mm->context.id,
> - PCI_DEVID(gpdev->bus->number,
> - gpdev->devfn));
> return ERR_PTR(-EINVAL);
> }
>
> @@ -845,9 +825,6 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
>
> if (rc) {
> kfree(npu_context);
> - opal_npu_destroy_context(nphb->opal_id, mm->context.id,
> - PCI_DEVID(gpdev->bus->number,
> - gpdev->devfn));
> return ERR_PTR(rc);
> }
>
> @@ -900,7 +877,6 @@ void pnv_npu2_destroy_context(struct npu_context *npu_context,
> struct pci_dev *gpdev)
> {
> int removed;
> - struct pnv_phb *nphb;
> struct npu *npu;
> struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
> struct device_node *nvlink_dn;
> @@ -909,18 +885,12 @@ void pnv_npu2_destroy_context(struct npu_context *npu_context,
> if (WARN_ON(!npdev))
> return;
>
> - if (!firmware_has_feature(FW_FEATURE_OPAL))
> - return;
> -
> - nphb = pci_bus_to_host(npdev->bus)->private_data;
> npu = npdev_to_npu(npdev);
> nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0);
> if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
> &nvlink_index)))
> return;
> WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], NULL);
> - opal_npu_destroy_context(nphb->opal_id, npu_context->mm->context.id,
> - PCI_DEVID(gpdev->bus->number, gpdev->devfn));
> spin_lock(&npu2_devices.context_lock);
> removed = kref_put(&npu_context->kref, pnv_npu2_release_context);
> spin_unlock(&npu2_devices.context_lock);
> @@ -952,9 +922,6 @@ int pnv_npu2_handle_fault(struct npu_context *context, uintptr_t *ea,
> /* mmap_sem should be held so the struct_mm must be present */
> struct mm_struct *mm = context->mm;
>
> - if (!firmware_has_feature(FW_FEATURE_OPAL))
> - return -ENODEV;
> -
> WARN_ON(!rwsem_is_locked(&mm->mmap_sem));
>
> for (i = 0; i < count; i++) {
> @@ -983,15 +950,11 @@ int pnv_npu2_handle_fault(struct npu_context *context, uintptr_t *ea,
> }
> EXPORT_SYMBOL(pnv_npu2_handle_fault);
>
> -int pnv_npu2_init(struct pnv_phb *phb)
> +int pnv_npu2_init(struct pci_controller *hose)
> {
> unsigned int i;
> u64 mmio_atsd;
> - struct device_node *dn;
> - struct pci_dev *gpdev;
> static int npu_index;
> - uint64_t rc = 0;
> - struct pci_controller *hose = phb->hose;
> struct npu *npu;
> int ret;
>
> @@ -1006,18 +969,6 @@ int pnv_npu2_init(struct pnv_phb *phb)
> }
>
> npu->nmmu_flush = of_property_read_bool(hose->dn, "ibm,nmmu-flush");
> - for_each_child_of_node(phb->hose->dn, dn) {
> - gpdev = pnv_pci_get_gpu_dev(get_pci_dev(dn));
> - if (gpdev) {
> - rc = opal_npu_map_lpar(phb->opal_id,
> - PCI_DEVID(gpdev->bus->number, gpdev->devfn),
> - 0, 0);
> - if (rc)
> - dev_err(&gpdev->dev,
> - "Error %lld mapping device to LPAR\n",
> - rc);
> - }
> - }
>
> for (i = 0; !of_property_read_u64_index(hose->dn, "ibm,mmio-atsd",
> i, &mmio_atsd); i++)
> @@ -1047,3 +998,52 @@ int pnv_npu2_init(struct pnv_phb *phb)
>
> return ret;
> }
> +
> +void pnv_npu2_map_lpar_phb(struct pnv_phb *nphb, unsigned long msr)
> +{
> + struct pci_dev *gpdev;
> + struct device_node *dn;
> + int ret;
> + struct pci_controller *hose = nphb->hose;
> +
> + for_each_child_of_node(hose->dn, dn) {
> + gpdev = pnv_pci_get_gpu_dev(get_pci_dev(dn));
> + if (!gpdev)
> + continue;
> +
> + dev_dbg(&gpdev->dev, "Map LPAR opalid=%llu\n", nphb->opal_id);
> + ret = opal_npu_map_lpar(nphb->opal_id,
> + PCI_DEVID(gpdev->bus->number, gpdev->devfn),
> + 0, 0);
> + if (!ret)
> + continue;
> + dev_err(&gpdev->dev, "Error %d mapping device to LPAR\n", ret);
> + }
> +
> + /*
> + * It seems that touching NPU2_XTS_BDF_MAP in the way
> + * the opal_npu_map_lpar() does somehow affects the result of
> + * what opal_npu_init_context() does so let's put the latter in
> + * a separate loop.
> + */
> + for_each_child_of_node(hose->dn, dn) {
> + gpdev = pnv_pci_get_gpu_dev(get_pci_dev(dn));
> + if (!gpdev)
> + continue;
> +
> + /*
> + * Setup the NPU context table for a particular GPU. These need
> + * to be per-GPU as we need the tables to filter ATSDs when
> + * there are no active contexts on a particular GPU. It is safe
> + * for these to be called concurrently with destroy as the OPAL
> + * call takes appropriate locks and refcounts on init/destroy.
> + */
> + dev_dbg(&gpdev->dev, "init context opalid=%llu\n",
> + nphb->opal_id);
> + ret = opal_npu_init_context(nphb->opal_id, 0/*__unused*/, msr,
> + PCI_DEVID(gpdev->bus->number, gpdev->devfn));
> + if (!ret)
> + continue;
> + dev_err(&gpdev->dev, "Failed to init context: %d\n", ret);
> + }
> +}
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index 0cc81c0..56a1398 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -1287,8 +1287,11 @@ static void pnv_pci_ioda_setup_PEs(void)
> /* PE#0 is needed for error reporting */
> pnv_ioda_reserve_pe(phb, 0);
> pnv_ioda_setup_npu_PEs(hose->bus);
> - if (phb->model == PNV_PHB_MODEL_NPU2)
> - pnv_npu2_init(phb);
> + if (phb->model == PNV_PHB_MODEL_NPU2) {
> + pnv_npu2_init(hose);
> + pnv_npu2_map_lpar_phb(phb,
> + MSR_DR | MSR_PR | MSR_HV);
This is the only caller of pnv_np2_map_lpar_phb(), do we need the
second parameter? I take it those "flags" to the function are
actually an MSR value; that wasn't clear from the previous code.
> + }
> }
> if (phb->type == PNV_PHB_NPU_OCAPI) {
> bus = hose->bus;
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20181108/63b73c68/attachment-0001.sig>
More information about the Linuxppc-dev
mailing list