[PATCH] powerpc/64s: Clear PCR on boot

Guenter Roeck linux at roeck-us.net
Fri May 25 23:33:08 AEST 2018


On Fri, May 18, 2018 at 11:37:42AM +1000, Michael Neuling wrote:
> Clear the PCR (Processor Compatibility Register) on boot to ensure we
> are not running in a compatibility mode.
> 
> We've seen this cause problems when a crash (and kdump) occurs while
> running compat mode guests. The kdump kernel then runs with the PCR
> set and causes problems. The symptom in the kdump kernel (also seen in
> petitboot after fast-reboot) is early userspace programs taking
> sigills on newer instructions (seen in libc).
> 

Hi folks,

this patch causes qemu to bail out with

Trying to write privileged spr 338 (0x152) at c000000000033454

when running it with "-M powernv -cpu POWER8" and powernv_defconfig.

Can you confirm that this is a bug in qemu ?

Thanks,
Guenter

> Signed-off-by: Michael Neuling <mikey at neuling.org>
> Cc: stable at vger.kernel.org
> Signed-off-by: Michael Ellerman <mpe at ellerman.id.au>
> ---
>  arch/powerpc/kernel/cpu_setup_power.S | 6 ++++++
>  arch/powerpc/kernel/dt_cpu_ftrs.c     | 1 +
>  2 files changed, 7 insertions(+)
> 
> diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
> index 3f30c994e931..458b928dbd84 100644
> --- a/arch/powerpc/kernel/cpu_setup_power.S
> +++ b/arch/powerpc/kernel/cpu_setup_power.S
> @@ -28,6 +28,7 @@ _GLOBAL(__setup_cpu_power7)
>  	beqlr
>  	li	r0,0
>  	mtspr	SPRN_LPID,r0
> +	mtspr	SPRN_PCR,r0
>  	mfspr	r3,SPRN_LPCR
>  	li	r4,(LPCR_LPES1 >> LPCR_LPES_SH)
>  	bl	__init_LPCR_ISA206
> @@ -41,6 +42,7 @@ _GLOBAL(__restore_cpu_power7)
>  	beqlr
>  	li	r0,0
>  	mtspr	SPRN_LPID,r0
> +	mtspr	SPRN_PCR,r0
>  	mfspr	r3,SPRN_LPCR
>  	li	r4,(LPCR_LPES1 >> LPCR_LPES_SH)
>  	bl	__init_LPCR_ISA206
> @@ -57,6 +59,7 @@ _GLOBAL(__setup_cpu_power8)
>  	beqlr
>  	li	r0,0
>  	mtspr	SPRN_LPID,r0
> +	mtspr	SPRN_PCR,r0
>  	mfspr	r3,SPRN_LPCR
>  	ori	r3, r3, LPCR_PECEDH
>  	li	r4,0 /* LPES = 0 */
> @@ -78,6 +81,7 @@ _GLOBAL(__restore_cpu_power8)
>  	beqlr
>  	li	r0,0
>  	mtspr	SPRN_LPID,r0
> +	mtspr	SPRN_PCR,r0
>  	mfspr   r3,SPRN_LPCR
>  	ori	r3, r3, LPCR_PECEDH
>  	li	r4,0 /* LPES = 0 */
> @@ -99,6 +103,7 @@ _GLOBAL(__setup_cpu_power9)
>  	mtspr	SPRN_PSSCR,r0
>  	mtspr	SPRN_LPID,r0
>  	mtspr	SPRN_PID,r0
> +	mtspr	SPRN_PCR,r0
>  	mfspr	r3,SPRN_LPCR
>  	LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE  | LPCR_HEIC)
>  	or	r3, r3, r4
> @@ -123,6 +128,7 @@ _GLOBAL(__restore_cpu_power9)
>  	mtspr	SPRN_PSSCR,r0
>  	mtspr	SPRN_LPID,r0
>  	mtspr	SPRN_PID,r0
> +	mtspr	SPRN_PCR,r0
>  	mfspr   r3,SPRN_LPCR
>  	LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE | LPCR_HEIC)
>  	or	r3, r3, r4
> diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
> index 8ab51f6ca03a..c904477abaf3 100644
> --- a/arch/powerpc/kernel/dt_cpu_ftrs.c
> +++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
> @@ -101,6 +101,7 @@ static void __restore_cpu_cpufeatures(void)
>  	if (hv_mode) {
>  		mtspr(SPRN_LPID, 0);
>  		mtspr(SPRN_HFSCR, system_registers.hfscr);
> +		mtspr(SPRN_PCR, 0);
>  	}
>  	mtspr(SPRN_FSCR, system_registers.fscr);
>  
> -- 
> 2.7.4


More information about the Linuxppc-dev mailing list