[PATCH v2 5/5] powerpc/lib: inline memcmp() for small constant sizes

[Segher Boessenkool]

On Thu, May 17, 2018 at 12:49:58PM +0200, Christophe Leroy wrote:
> In my 8xx configuration, I get 208 calls to memcmp()
> Within those 208 calls, about half of them have constant sizes,
> 46 have a size of 8, 17 have a size of 16, only a few have a
> size over 16. Other fixed sizes are mostly 4, 6 and 10.
> 
> This patch inlines calls to memcmp() when size
> is constant and lower than or equal to 16
> 
> In my 8xx configuration, this reduces the number of calls
> to memcmp() from 208 to 123
> 
> The following table shows the number of TB timeticks to perform
> a constant size memcmp() before and after the patch depending on
> the size
> 
> 	Before	After	Improvement
> 01:	 7577	 5682	25%
> 02:	41668	 5682	86%
> 03:	51137	13258	74%
> 04:	45455	 5682	87%
> 05:	58713	13258	77%
> 06:	58712	13258	77%
> 07:	68183	20834	70%
> 08:	56819	15153	73%
> 09:	70077	28411	60%
> 10:	70077	28411	60%
> 11:	79546	35986	55%
> 12:	68182	28411	58%
> 13:	81440	35986	55%
> 14:	81440	39774	51%
> 15:	94697	43562	54%
> 16:	79546	37881	52%

Could you show results with a more recent GCC?  What version was this?

What is this really measuring?  I doubt it takes 7577 (or 5682) timebase
ticks to do a 1-byte memcmp, which is just 3 instructions after all.


Segher