[PATCH v2 2/2] powerpc/32be: use stmw/lmw for registers save/restore in asm

[Christophe LEROY]

Le 17/05/2018 à 15:15, Segher Boessenkool a écrit :
> On Thu, May 17, 2018 at 10:10:21PM +1000, Michael Ellerman wrote:
>> Christophe Leroy <christophe.leroy at c-s.fr> writes:
>>> arch/powerpc/Makefile activates -mmultiple on BE PPC32 configs
>>> in order to use multiple word instructions in functions entry/exit
>>
>> True, though that could be a lot simpler because the MULTIPLEWORD value
>> is only used for PPC32, which is always big endian. I'll send a patch
>> for that.
> 
> Do you mean in the kernel?  Many 32-bit processors can do LE, and many
> do not implement multiple or string insns in LE mode.
> 
>>> The patch does the same for the asm parts, for consistency
>>>
>>> On processors like the 8xx on which insn fetching is pretty slow,
>>> this speeds up registers save/restore
>>
>> OK. I've always heard that they should be avoided, but that's coming
>> from 64-bit land.
>>
>> I guess we've been enabling this for all 32-bit targets for ever so it
>> must be a reasonable option.
> 
> On 603, load multiple (and string) are one cycle slower than doing all the
> loads separately, and store is essentially the same as separate stores.
> On 7xx and 7xxx both loads and stores are one cycle slower as multiple
> than as separate insns.

That's in theory when the instructions are already in the cache.

But loading several instructions into the cache takes time.

Christophe

> 
> load/store multiple are nice for saving/storing registers.
> 
> 
> Segher
>