[PATCH 2/9] armv8: pm: Fix issue of rcpm driver wrongly program other IP control bits

Yinbo Zhu yinbo.zhu at nxp.com
Fri May 11 13:35:23 AEST 2018


From: Ran Wang <ran.wang_1 at nxp.com>

When rcpm driver get target register data from DTS property 'fsl,
rcpm-wakeup' (second value), it directly write that data to register
RCPM_IPPDEXPCRx rather than 'OR' the value read from it before. This
operation will over-write those non-related IP control bit which
might have been programmed, should be prevented.

Signed-off-by: Ran Wang <ran.wang_1 at nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu at nxp.com>
---
 drivers/soc/fsl/rcpm.c |   10 +++++++---
 1 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c
index ff0477b..39eabfb 100644
--- a/drivers/soc/fsl/rcpm.c
+++ b/drivers/soc/fsl/rcpm.c
@@ -75,6 +75,7 @@ static void rcpm_wakeup_fixup(struct device *dev, void *data)
 static int rcpm_suspend_prepare(void)
 {
 	int i;
+	u32 val;
 
 	WARN_ON(!rcpm);
 
@@ -84,9 +85,12 @@ static int rcpm_suspend_prepare(void)
 	dpm_for_each_dev(NULL, rcpm_wakeup_fixup);
 
 	for (i = 0; i < rcpm->ipp_num; i++) {
-		rcpm_reg_write(rcpm->ippdexpcr_offset + 4 * i,
-			       rcpm->ippdexpcr[i]);
-		pr_debug("ippdexpcr%d = 0x%x\n", i, rcpm->ippdexpcr[i]);
+		if (rcpm->ippdexpcr[i]) {
+			val = rcpm_reg_read(rcpm->ippdexpcr_offset + 4 * i);
+			rcpm_reg_write(rcpm->ippdexpcr_offset + 4 * i,
+					       val | rcpm->ippdexpcr[i]);
+			pr_debug("ippdexpcr%d = 0x%x\n", i, rcpm->ippdexpcr[i]);
+		}
 	}
 
 	return 0;
-- 
1.7.1



More information about the Linuxppc-dev mailing list