[PATCH 11/15] tty: hvc: hvc_poll break hv read loop
Nicholas Piggin
npiggin at gmail.com
Tue May 1 00:55:54 AEST 2018
Avoid looping with the spinlock held while there is read data
being returned from the hv driver. Instead note if the entire
size returned by tty_buffer_request_room was read, and request
another read poll.
This limits the critical section lengths, and provides more
even service to other consoles in case there is a pathological
condition.
Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
drivers/tty/hvc/hvc_console.c | 88 ++++++++++++++++++-----------------
1 file changed, 45 insertions(+), 43 deletions(-)
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index fddb63322c67..745ac220fce8 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -592,7 +592,7 @@ static u32 timeout = MIN_TIMEOUT;
int hvc_poll(struct hvc_struct *hp)
{
struct tty_struct *tty;
- int i, n, poll_mask = 0;
+ int i, n, count, poll_mask = 0;
char buf[N_INBUF] __ALIGNED__;
unsigned long flags;
int read_total = 0;
@@ -618,7 +618,7 @@ int hvc_poll(struct hvc_struct *hp)
/* Now check if we can get data (are we throttled ?) */
if (tty_throttled(tty))
- goto throttled;
+ goto out;
/* If we aren't notifier driven and aren't throttled, we always
* request a reschedule
@@ -627,56 +627,58 @@ int hvc_poll(struct hvc_struct *hp)
poll_mask |= HVC_POLL_READ;
/* Read data if any */
- for (;;) {
- int count = tty_buffer_request_room(&hp->port, N_INBUF);
- /* If flip is full, just reschedule a later read */
- if (count == 0) {
+ count = tty_buffer_request_room(&hp->port, N_INBUF);
+
+ /* If flip is full, just reschedule a later read */
+ if (count == 0) {
+ poll_mask |= HVC_POLL_READ;
+ goto out;
+ }
+
+ n = hp->ops->get_chars(hp->vtermno, buf, count);
+ if (n <= 0) {
+ /* Hangup the tty when disconnected from host */
+ if (n == -EPIPE) {
+ spin_unlock_irqrestore(&hp->lock, flags);
+ tty_hangup(tty);
+ spin_lock_irqsave(&hp->lock, flags);
+ } else if ( n == -EAGAIN ) {
+ /*
+ * Some back-ends can only ensure a certain min
+ * num of bytes read, which may be > 'count'.
+ * Let the tty clear the flip buff to make room.
+ */
poll_mask |= HVC_POLL_READ;
- break;
}
+ goto out;
+ }
- n = hp->ops->get_chars(hp->vtermno, buf, count);
- if (n <= 0) {
- /* Hangup the tty when disconnected from host */
- if (n == -EPIPE) {
- spin_unlock_irqrestore(&hp->lock, flags);
- tty_hangup(tty);
- spin_lock_irqsave(&hp->lock, flags);
- } else if ( n == -EAGAIN ) {
- /*
- * Some back-ends can only ensure a certain min
- * num of bytes read, which may be > 'count'.
- * Let the tty clear the flip buff to make room.
- */
- poll_mask |= HVC_POLL_READ;
- }
- break;
- }
- for (i = 0; i < n; ++i) {
+ for (i = 0; i < n; ++i) {
#ifdef CONFIG_MAGIC_SYSRQ
- if (hp->index == hvc_console.index) {
- /* Handle the SysRq Hack */
- /* XXX should support a sequence */
- if (buf[i] == '\x0f') { /* ^O */
- /* if ^O is pressed again, reset
- * sysrq_pressed and flip ^O char */
- sysrq_pressed = !sysrq_pressed;
- if (sysrq_pressed)
- continue;
- } else if (sysrq_pressed) {
- handle_sysrq(buf[i]);
- sysrq_pressed = 0;
+ if (hp->index == hvc_console.index) {
+ /* Handle the SysRq Hack */
+ /* XXX should support a sequence */
+ if (buf[i] == '\x0f') { /* ^O */
+ /* if ^O is pressed again, reset
+ * sysrq_pressed and flip ^O char */
+ sysrq_pressed = !sysrq_pressed;
+ if (sysrq_pressed)
continue;
- }
+ } else if (sysrq_pressed) {
+ handle_sysrq(buf[i]);
+ sysrq_pressed = 0;
+ continue;
}
-#endif /* CONFIG_MAGIC_SYSRQ */
- tty_insert_flip_char(&hp->port, buf[i], 0);
}
-
- read_total += n;
+#endif /* CONFIG_MAGIC_SYSRQ */
+ tty_insert_flip_char(&hp->port, buf[i], 0);
}
- throttled:
+ if (n == count)
+ poll_mask |= HVC_POLL_READ;
+ read_total = n;
+
+ out:
/* Wakeup write queue if necessary */
if (hp->do_wakeup) {
hp->do_wakeup = 0;
--
2.17.0
More information about the Linuxppc-dev
mailing list