[PATCH v2 2/9] powerpc/eeh: Manage EEH_PE_RECOVERING inside eeh_handle_normal_event()

[Alexey Kardashevskiy]

On 19/3/18 1:46 pm, Sam Bobroff wrote:
> Currently the EEH_PE_RECOVERING flag for a PE is managed by both the
> caller and callee of eeh_handle_normal_event() (among other places not
> considered here). This is complicated by the fact that the PE may
> or may not have been invalidated by the call.
> 
> So move the callee's handling into eeh_handle_normal_event(), which
> clarifies it and allows the return type to be changed to void (because
> it no longer needs to indicate at the PE has been invalidated).
> 
> This should not change behaviour except in eeh_event_handler() where
> it was previously possible to cause eeh_pe_state_clear() to be called
> on an invalid PE, which is now avoided.
> 
> Signed-off-by: Sam Bobroff <sam.bobroff at au1.ibm.com>

Reviewed-by: Alexey Kardashevskiy <aik at ozlabs.ru>


> ---
>  arch/powerpc/include/asm/eeh_event.h |  2 +-
>  arch/powerpc/kernel/eeh_driver.c     | 29 +++++++++++------------------
>  arch/powerpc/kernel/eeh_event.c      |  2 --
>  3 files changed, 12 insertions(+), 21 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/eeh_event.h b/arch/powerpc/include/asm/eeh_event.h
> index 0a168038882d..9884e872686f 100644
> --- a/arch/powerpc/include/asm/eeh_event.h
> +++ b/arch/powerpc/include/asm/eeh_event.h
> @@ -34,7 +34,7 @@ struct eeh_event {
>  int eeh_event_init(void);
>  int eeh_send_failure_event(struct eeh_pe *pe);
>  void eeh_remove_event(struct eeh_pe *pe, bool force);
> -bool eeh_handle_normal_event(struct eeh_pe *pe);
> +void eeh_handle_normal_event(struct eeh_pe *pe);
>  void eeh_handle_special_event(void);
>  
>  #endif /* __KERNEL__ */
> diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
> index 51b21c97910f..5b7a5ed4db4d 100644
> --- a/arch/powerpc/kernel/eeh_driver.c
> +++ b/arch/powerpc/kernel/eeh_driver.c
> @@ -733,7 +733,8 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus,
>  
>  /**
>   * eeh_handle_normal_event - Handle EEH events on a specific PE
> - * @pe: EEH PE
> + * @pe: EEH PE - which should not be used after we return, as it may
> + * have been invalidated.
>   *
>   * Attempts to recover the given PE.  If recovery fails or the PE has failed
>   * too many times, remove the PE.
> @@ -750,10 +751,8 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus,
>   * & devices under this slot, and then finally restarting the device
>   * drivers (which cause a second set of hotplug events to go out to
>   * userspace).
> - *
> - * Returns true if @pe should no longer be used, else false.
>   */
> -bool eeh_handle_normal_event(struct eeh_pe *pe)
> +void eeh_handle_normal_event(struct eeh_pe *pe)
>  {
>  	struct pci_bus *frozen_bus;
>  	struct eeh_dev *edev, *tmp;
> @@ -765,9 +764,11 @@ bool eeh_handle_normal_event(struct eeh_pe *pe)
>  	if (!frozen_bus) {
>  		pr_err("%s: Cannot find PCI bus for PHB#%x-PE#%x\n",
>  			__func__, pe->phb->global_number, pe->addr);
> -		return false;
> +		return;
>  	}
>  
> +	eeh_pe_state_mark(pe, EEH_PE_RECOVERING);
> +
>  	eeh_pe_update_time_stamp(pe);
>  	pe->freeze_count++;
>  	if (pe->freeze_count > eeh_max_freezes) {
> @@ -904,7 +905,7 @@ bool eeh_handle_normal_event(struct eeh_pe *pe)
>  	pr_info("EEH: Notify device driver to resume\n");
>  	eeh_pe_dev_traverse(pe, eeh_report_resume, NULL);
>  
> -	return false;
> +	goto final;
>  
>  hard_fail:
>  	/*
> @@ -940,12 +941,12 @@ bool eeh_handle_normal_event(struct eeh_pe *pe)
>  			pci_lock_rescan_remove();
>  			pci_hp_remove_devices(frozen_bus);
>  			pci_unlock_rescan_remove();
> -
>  			/* The passed PE should no longer be used */
> -			return true;
> +			return;
>  		}
>  	}
> -	return false;
> +final:
> +	eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
>  }
>  
>  /**
> @@ -1018,15 +1019,7 @@ void eeh_handle_special_event(void)
>  		 */
>  		if (rc == EEH_NEXT_ERR_FROZEN_PE ||
>  		    rc == EEH_NEXT_ERR_FENCED_PHB) {
> -			/*
> -			 * eeh_handle_normal_event() can make the PE stale if it
> -			 * determines that the PE cannot possibly be recovered.
> -			 * Don't modify the PE state if that's the case.
> -			 */
> -			if (eeh_handle_normal_event(pe))
> -				continue;
> -
> -			eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
> +			eeh_handle_normal_event(pe);
>  		} else {
>  			pci_lock_rescan_remove();
>  			list_for_each_entry(hose, &hose_list, list_node) {
> diff --git a/arch/powerpc/kernel/eeh_event.c b/arch/powerpc/kernel/eeh_event.c
> index 872bcfe8f90e..61c9356bf9c9 100644
> --- a/arch/powerpc/kernel/eeh_event.c
> +++ b/arch/powerpc/kernel/eeh_event.c
> @@ -73,7 +73,6 @@ static int eeh_event_handler(void * dummy)
>  		/* We might have event without binding PE */
>  		pe = event->pe;
>  		if (pe) {
> -			eeh_pe_state_mark(pe, EEH_PE_RECOVERING);
>  			if (pe->type & EEH_PE_PHB)
>  				pr_info("EEH: Detected error on PHB#%x\n",
>  					 pe->phb->global_number);
> @@ -82,7 +81,6 @@ static int eeh_event_handler(void * dummy)
>  					"PHB#%x-PE#%x\n",
>  					pe->phb->global_number, pe->addr);
>  			eeh_handle_normal_event(pe);
> -			eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
>  		} else {
>  			eeh_handle_special_event();
>  		}
> 


-- 
Alexey