[PATCH v4 1/6] powerpc/pseries: Defer the logging of rtas error to irq work queue.

[Mahesh Jagannath Salgaonkar]

On 06/28/2018 06:49 PM, Laurent Dufour wrote:
> On 28/06/2018 13:10, Mahesh J Salgaonkar wrote:
>> From: Mahesh Salgaonkar <mahesh at linux.vnet.ibm.com>
>>
>> rtas_log_buf is a buffer to hold RTAS event data that are communicated
>> to kernel by hypervisor. This buffer is then used to pass RTAS event
>> data to user through proc fs. This buffer is allocated from vmalloc
>> (non-linear mapping) area.
>>
>> On Machine check interrupt, register r3 points to RTAS extended event
>> log passed by hypervisor that contains the MCE event. The pseries
>> machine check handler then logs this error into rtas_log_buf. The
>> rtas_log_buf is a vmalloc-ed (non-linear) buffer we end up taking up a
>> page fault (vector 0x300) while accessing it. Since machine check
>> interrupt handler runs in NMI context we can not afford to take any
>> page fault. Page faults are not honored in NMI context and causes
>> kernel panic. Apart from that, as Nick pointed out, pSeries_log_error()
>> also takes a spin_lock while logging error which is not safe in NMI
>> context. It may endup in deadlock if we get another MCE before releasing
>> the lock. Fix this by deferring the logging of rtas error to irq work queue.
>>
>> Current implementation uses two different buffers to hold rtas error log
>> depending on whether extended log is provided or not. This makes bit
>> difficult to identify which buffer has valid data that needs to logged
>> later in irq work. Simplify this using single buffer, one per paca, and
>> copy rtas log to it irrespective of whether extended log is provided or
>> not. Allocate this buffer below RMA region so that it can be accessed
>> in real mode mce handler.
>>
>> Fixes: b96672dd840f ("powerpc: Machine check interrupt is a non-maskable interrupt")
>> Cc: stable at vger.kernel.org
>> Signed-off-by: Mahesh Salgaonkar <mahesh at linux.vnet.ibm.com>
>> ---
>>  arch/powerpc/include/asm/paca.h        |    3 ++
>>  arch/powerpc/platforms/pseries/ras.c   |   39 +++++++++++++++++++++-----------
>>  arch/powerpc/platforms/pseries/setup.c |   16 +++++++++++++
>>  3 files changed, 45 insertions(+), 13 deletions(-)
>>
>> diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
>> index 3f109a3e3edb..b441fef53077 100644
>> --- a/arch/powerpc/include/asm/paca.h
>> +++ b/arch/powerpc/include/asm/paca.h
>> @@ -251,6 +251,9 @@ struct paca_struct {
>>  	void *rfi_flush_fallback_area;
>>  	u64 l1d_flush_size;
>>  #endif
>> +#ifdef CONFIG_PPC_PSERIES
>> +	u8 *mce_data_buf;		/* buffer to hold per cpu rtas errlog */
>> +#endif /* CONFIG_PPC_PSERIES */
>>  } ____cacheline_aligned;
>>
>>  extern void copy_mm_to_paca(struct mm_struct *mm);
>> diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
>> index 5e1ef9150182..f6ba9a2a4f84 100644
>> --- a/arch/powerpc/platforms/pseries/ras.c
>> +++ b/arch/powerpc/platforms/pseries/ras.c
>> @@ -22,6 +22,7 @@
>>  #include <linux/of.h>
>>  #include <linux/fs.h>
>>  #include <linux/reboot.h>
>> +#include <linux/irq_work.h>
>>
>>  #include <asm/machdep.h>
>>  #include <asm/rtas.h>
>> @@ -32,11 +33,13 @@
>>  static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX];
>>  static DEFINE_SPINLOCK(ras_log_buf_lock);
>>
>> -static char global_mce_data_buf[RTAS_ERROR_LOG_MAX];
>> -static DEFINE_PER_CPU(__u64, mce_data_buf);
>> -
>>  static int ras_check_exception_token;
>>
>> +static void mce_process_errlog_event(struct irq_work *work);
>> +static struct irq_work mce_errlog_process_work = {
>> +	.func = mce_process_errlog_event,
>> +};
>> +
>>  #define EPOW_SENSOR_TOKEN	9
>>  #define EPOW_SENSOR_INDEX	0
>>
>> @@ -336,10 +339,9 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id)
>>   * the actual r3 if possible, and a ptr to the error log entry
>>   * will be returned if found.
>>   *
>> - * If the RTAS error is not of the extended type, then we put it in a per
>> - * cpu 64bit buffer. If it is the extended type we use global_mce_data_buf.
>> + * Use one buffer mce_data_buf per cpu to store RTAS error.
>>   *
>> - * The global_mce_data_buf does not have any locks or protection around it,
>> + * The mce_data_buf does not have any locks or protection around it,
>>   * if a second machine check comes in, or a system reset is done
>>   * before we have logged the error, then we will get corruption in the
>>   * error log.  This is preferable over holding off on calling
>> @@ -362,20 +364,19 @@ static struct rtas_error_log *fwnmi_get_errinfo(struct pt_regs *regs)
>>  	savep = __va(regs->gpr[3]);
>>  	regs->gpr[3] = savep[0];	/* restore original r3 */
>>
>> -	/* If it isn't an extended log we can use the per cpu 64bit buffer */
>>  	h = (struct rtas_error_log *)&savep[1];
>> +	/* Use the per cpu buffer from paca to store rtas error log */
>> +	memset(local_paca->mce_data_buf, 0, RTAS_ERROR_LOG_MAX);
>>  	if (!rtas_error_extended(h)) {
>> -		memcpy(this_cpu_ptr(&mce_data_buf), h, sizeof(__u64));
>> -		errhdr = (struct rtas_error_log *)this_cpu_ptr(&mce_data_buf);
>> +		memcpy(local_paca->mce_data_buf, h, sizeof(__u64));
>>  	} else {
>>  		int len, error_log_length;
>>
>>  		error_log_length = 8 + rtas_error_extended_log_length(h);
>>  		len = max_t(int, error_log_length, RTAS_ERROR_LOG_MAX);
>> -		memset(global_mce_data_buf, 0, RTAS_ERROR_LOG_MAX);
>> -		memcpy(global_mce_data_buf, h, len);
>> -		errhdr = (struct rtas_error_log *)global_mce_data_buf;
>> +		memcpy(local_paca->mce_data_buf, h, len);
>>  	}
>> +	errhdr = (struct rtas_error_log *)local_paca->mce_data_buf;
> 
> You should drop errhdr in this function and simply do
> 	return (struct rtas_error_log *)local_paca->mce_data_buf;

sure, will do that in next revision.

Thanks,
-Mahesh.