[RFC PATCH 03/23] genirq: Introduce IRQF_DELIVER_AS_NMI

[Ricardo Neri]

On Fri, Jun 15, 2018 at 09:01:02AM +0100, Julien Thierry wrote:
> Hi Ricardo,
> 
> On 15/06/18 03:12, Ricardo Neri wrote:
> >On Wed, Jun 13, 2018 at 11:06:25AM +0100, Marc Zyngier wrote:
> >>On 13/06/18 10:20, Thomas Gleixner wrote:
> >>>On Wed, 13 Jun 2018, Julien Thierry wrote:
> >>>>On 13/06/18 09:34, Peter Zijlstra wrote:
> >>>>>On Tue, Jun 12, 2018 at 05:57:23PM -0700, Ricardo Neri wrote:
> >>>>>>diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
> >>>>>>index 5426627..dbc5e02 100644
> >>>>>>--- a/include/linux/interrupt.h
> >>>>>>+++ b/include/linux/interrupt.h
> >>>>>>@@ -61,6 +61,8 @@
> >>>>>>    *                interrupt handler after suspending interrupts. For
> >>>>>>system
> >>>>>>    *                wakeup devices users need to implement wakeup
> >>>>>>detection in
> >>>>>>    *                their interrupt handlers.
> >>>>>>+ * IRQF_DELIVER_AS_NMI - Configure interrupt to be delivered as
> >>>>>>non-maskable, if
> >>>>>>+ *                supported by the chip.
> >>>>>>    */
> >>>>>
> >>>>>NAK on the first 6 patches. You really _REALLY_ don't want to expose
> >>>>>NMIs to this level.
> >>>>>
> >>>>
> >>>>I've been working on something similar on arm64 side, and effectively the one
> >>>>thing that might be common to arm64 and intel is the interface to set an
> >>>>interrupt as NMI. So I guess it would be nice to agree on the right approach
> >>>>for this.
> >>>>
> >>>>The way I did it was by introducing a new irq_state and let the irqchip driver
> >>>>handle most of the work (if it supports that state):
> >>>>
> >>>>https://lkml.org/lkml/2018/5/25/181
> >>>>
> >>>>This has not been ACKed nor NAKed. So I am just asking whether this is a more
> >>>>suitable approach, and if not, is there any suggestions on how to do this?
> >>>
> >>>I really didn't pay attention to that as it's burried in the GIC/ARM series
> >>>which is usually Marc's playground.
> >>
> >>I'm working my way through it ATM now that I have some brain cycles back.
> >>
> >>>Adding NMI delivery support at low level architecture irq chip level is
> >>>perfectly fine, but the exposure of that needs to be restricted very
> >>>much. Adding it to the generic interrupt control interfaces is not going to
> >>>happen. That's doomed to begin with and a complete abuse of the interface
> >>>as the handler can not ever be used for that.
> >>
> >>I can only agree with that. Allowing random driver to use request_irq()
> >>to make anything an NMI ultimately turns it into a complete mess ("hey,
> >>NMI is *faster*, let's use that"), and a potential source of horrible
> >>deadlocks.
> >>
> >>What I'd find more palatable is a way for an irqchip to be able to
> >>prioritize some interrupts based on a set of architecturally-defined
> >>requirements, and a separate NMI requesting/handling framework that is
> >>separate from the IRQ API, as the overall requirements are likely to
> >>completely different.
> >>
> >>It shouldn't have to be nearly as complex as the IRQ API, and require
> >>much stricter requirements in terms of what you can do there (flow
> >>handling should definitely be different).
> >
> >Marc, Julien, do you plan to actively work on this? Would you mind keeping
> >me in the loop? I also need this work for this watchdog. In the meantime,
> >I will go through Julien's patches and try to adapt it to my work.
> 
> We are going to work on this and of course your input is most welcome to
> make sure we have an interface usable across different architectures.

Great! Thanks! I will keep an eye to future version of your "arm64: provide
pseudo NMI with GICv3" series.
> 
> In my patches, I'm not sure there is much to adapt to your work as most of
> it is arch specific (although I wont say no to another pair of eyes looking
> at them). From what I've seen of your patches, the point where we converge
> is that need for some code to be able to tell the irqchip "I want that
> particular interrupt line to be treated/setup as an NMI".

Indeed, there has to be a generic way for the irqchip to announce that it
supports configuring an interrupt as NMI... and a way to actually configuring
it.

> 
> We'll make sure to keep you in the loop for discussions/suggestions on this.

Thank you!

Thanks and BR,
Ricardo