[RFC 3/5] powerpc/mpic: Add support for non-contiguous irq ranges
Bharat Bhushan
Bharat.Bhushan at nxp.com
Fri Jul 27 19:47:59 AEST 2018
Freescale MPIC h/w may not support all interrupt sources reported
by hardware, "last-interrupt-source" or platform. On these platforms
a misconfigured device tree that assigns one of the reserved
interrupts leaves a non-functioning system without warning.
This patch adds "supported-irq-ranges" property in device tree to
provide the range of supported source of interrupts. If a reserved
interrupt used then it will not be programming h/w, which it does
currently, and through warning.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan at nxp.com>
---
.../devicetree/bindings/powerpc/fsl/mpic.txt | 8 ++
arch/powerpc/include/asm/mpic.h | 9 ++
arch/powerpc/sysdev/mpic.c | 113 +++++++++++++++++++--
3 files changed, 121 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
index dc57446..bd6da54 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
@@ -77,6 +77,14 @@ PROPERTIES
in the global feature registers. If specified, this field will
override the value read from MPIC_GREG_FEATURE_LAST_SRC.
+ - supported-irq-ranges
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: This encodes arbitrary number of start-irq and end-irq
+ pairs, both including. Interrupt source supported by an MPIC
+ may not be contigous, in that case this property will be used
+ to pass supported source of interrupt ranges.
+
INTERRUPT SPECIFIER DEFINITION
Interrupt specifiers consists of 4 cells encoded as
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index fad8ddd..4080c98 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -252,6 +252,11 @@ struct mpic_irq_save {
#endif
};
+struct mpic_irq_range {
+ u32 start_irq;
+ u32 end_irq;
+};
+
/* The instance data of a given MPIC */
struct mpic
{
@@ -281,6 +286,10 @@ struct mpic
/* Number of sources */
unsigned int num_sources;
+ /* Supported source ranges */
+ unsigned int num_ranges;
+ struct mpic_irq_range *irq_ranges;
+
/* vector numbers used for internal sources (ipi/timers) */
unsigned int ipi_vecs[4];
unsigned int timer_vecs[8];
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index d503887..cbf3a51 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -155,6 +155,23 @@ struct bus_type mpic_subsys = {
#endif /* CONFIG_MPIC_WEIRD */
+static int mpic_irq_source_invalid(struct mpic *mpic, unsigned int irq)
+{
+ int i;
+
+ for (i = 0; i < mpic->num_ranges; i++) {
+ if ((irq >= mpic->irq_ranges[i].start_irq) &&
+ (irq <= mpic->irq_ranges[i].end_irq))
+ return 0;
+ }
+
+ /* if not supported irq-ranges then check for num_sources */
+ if (!mpic->num_ranges && irq < mpic->num_sources)
+ return 0;
+
+ return -EINVAL;
+}
+
static inline unsigned int mpic_processor_id(struct mpic *mpic)
{
unsigned int cpu = 0;
@@ -873,8 +890,10 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type)
DBG("mpic: set_irq_type(mpic:@%p,virq:%d,src:0x%x,type:0x%x)\n",
mpic, d->irq, src, flow_type);
- if (src >= mpic->num_sources)
+ if (mpic_irq_source_invalid(mpic, src)) {
+ WARN(1, "mpic: Reserved IRQ source %d\n", src);
return -EINVAL;
+ }
vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
@@ -933,8 +952,10 @@ void mpic_set_vector(unsigned int virq, unsigned int vector)
DBG("mpic: set_vector(mpic:@%p,virq:%d,src:%d,vector:0x%x)\n",
mpic, virq, src, vector);
- if (src >= mpic->num_sources)
+ if (mpic_irq_source_invalid(mpic, src)) {
+ WARN(1, "mpic: Reserved IRQ source %d\n", src);
return;
+ }
vecpri = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
vecpri = vecpri & ~MPIC_INFO(VECPRI_VECTOR_MASK);
@@ -950,8 +971,10 @@ static void mpic_set_destination(unsigned int virq, unsigned int cpuid)
DBG("mpic: set_destination(mpic:@%p,virq:%d,src:%d,cpuid:0x%x)\n",
mpic, virq, src, cpuid);
- if (src >= mpic->num_sources)
+ if (mpic_irq_source_invalid(mpic, src)) {
+ WARN(1, "mpic: Reserved IRQ source %d\n", src);
return;
+ }
mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid);
}
@@ -1038,7 +1061,7 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq,
if (mpic_map_error_int(mpic, virq, hw))
return 0;
- if (hw >= mpic->num_sources) {
+ if (mpic_irq_source_invalid(mpic, hw)) {
pr_warn("mpic: Mapping of source 0x%x failed, source out of range !\n",
(unsigned int)hw);
return -EINVAL;
@@ -1210,6 +1233,52 @@ u32 fsl_mpic_primary_get_version(void)
return 0;
}
+static u32 mpic_last_irq_from_ranges(struct mpic *mpic)
+{
+ int i;
+ u32 last_irq = 0;
+
+ for (i = 0; i < mpic->num_ranges; i++)
+ if (last_irq < mpic->irq_ranges[i].end_irq)
+ last_irq = mpic->irq_ranges[i].end_irq;
+
+ return last_irq;
+}
+
+static int __init mpic_init_irq_ranges(struct mpic *mpic)
+{
+ const u32 *irq_ranges;
+ u32 len, count;
+ int i;
+
+ irq_ranges = of_get_property(mpic->node, "supported-irq-ranges", &len);
+ if (irq_ranges == NULL) {
+ pr_info("%s : supported-irq-ranges not found in mpic(%p)\n",
+ __func__, mpic->node);
+ return -1;
+ }
+
+ if (len % (2 * sizeof(u32)) != 0) {
+ pr_info("%s : incorrect irq ranges in mpic(%p)\n",
+ __func__, mpic->node);
+ return -1;
+ }
+
+ count = len / (2 * sizeof(u32));
+ mpic->irq_ranges = kcalloc(count, sizeof(struct mpic_irq_range),
+ GFP_KERNEL);
+ if (mpic->irq_ranges == NULL)
+ return -1;
+
+ mpic->num_ranges = count;
+ for (i = 0; i < count; i++) {
+ mpic->irq_ranges[i].start_irq = *irq_ranges++;
+ mpic->irq_ranges[i].end_irq = *irq_ranges++;
+ }
+
+ return 0;
+}
+
static int mpic_get_last_irq_source(struct mpic *mpic,
unsigned int irq_count,
unsigned int isu_size)
@@ -1219,14 +1288,18 @@ static int mpic_get_last_irq_source(struct mpic *mpic,
/* Current priority order for getting last irq:
* 1) irq_count from platform
- * 2) "last-interrupt-source" from device tree
- * 3) isu_size from platform
- * 4) MPIC h/w GREG_FEATURE_0 register
+ * 2) "supported-irq-ranges" from device tree
+ * 3) "last-interrupt-source" from device tree
+ * 4) isu_size from platform
+ * 5) MPIC h/w GREG_FEATURE_0 register
*/
if (irq_count)
return (irq_count - 1);
+ if (!mpic_init_irq_ranges(mpic))
+ return mpic_last_irq_from_ranges(mpic);
+
if (!of_property_read_u32(mpic->node, "last-interrupt-source",
&last_irq)) {
return last_irq;
@@ -1632,6 +1705,10 @@ void __init mpic_init(struct mpic *mpic)
u32 vecpri = MPIC_VECPRI_MASK | i |
(8 << MPIC_VECPRI_PRIORITY_SHIFT);
+ /* Skip if source irq not valid */
+ if (mpic_irq_source_invalid(mpic, i))
+ continue;
+
/* check if protected */
if (mpic->protected && test_bit(i, mpic->protected))
continue;
@@ -1732,9 +1809,14 @@ void mpic_setup_this_cpu(void)
* values of irq_desc[].affinity in irq.c.
*/
if (distribute_irqs && !(mpic->flags & MPIC_SINGLE_DEST_CPU)) {
- for (i = 0; i < mpic->num_sources ; i++)
+ for (i = 0; i < mpic->num_sources ; i++) {
+ /* Skip if irq source is not valid */
+ if (mpic_irq_source_invalid(mpic, i))
+ continue;
+
mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) | msk);
+ }
}
/* Set current processor priority to 0 */
@@ -1772,9 +1854,14 @@ void mpic_teardown_this_cpu(int secondary)
raw_spin_lock_irqsave(&mpic_lock, flags);
/* let the mpic know we don't want intrs. */
- for (i = 0; i < mpic->num_sources ; i++)
+ for (i = 0; i < mpic->num_sources ; i++) {
+ /* Skip if irq not valid */
+ if (mpic_irq_source_invalid(mpic, i))
+ continue;
+
mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) & ~msk);
+ }
/* Set current processor priority to max */
mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
@@ -1958,6 +2045,10 @@ static void mpic_suspend_one(struct mpic *mpic)
int i;
for (i = 0; i < mpic->num_sources; i++) {
+ /* Skip if irq source not valid */
+ if (mpic_irq_source_invalid(mpic, i))
+ continue;
+
mpic->save_data[i].vecprio =
mpic_irq_read(i, MPIC_INFO(IRQ_VECTOR_PRI));
mpic->save_data[i].dest =
@@ -1982,6 +2073,10 @@ static void mpic_resume_one(struct mpic *mpic)
int i;
for (i = 0; i < mpic->num_sources; i++) {
+ /* Skip if irq source not valid */
+ if (mpic_irq_source_invalid(mpic, i))
+ continue;
+
mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI),
mpic->save_data[i].vecprio);
mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
--
1.9.3
More information about the Linuxppc-dev
mailing list