[PATCH] powerpc/pasemi: Use pr_err/pr_warn... for kernel messages
Darren Stevens
darren at stevens-zone.net
Thu Jul 26 06:45:01 AEST 2018
Pasemi code still uses printk(KERN_ERR/KERN_WARN ... change these to
pr_err(, pr_warn(... to match other powerpc arch code.
No functional changes.
Signed-off-by: Darren Stevens <darren at stevens-zone.net>
---
arch/powerpc/platforms/pasemi/dma_lib.c | 6 ++--
arch/powerpc/platforms/pasemi/gpio_mdio.c | 2 +-
arch/powerpc/platforms/pasemi/idle.c | 4 +--
arch/powerpc/platforms/pasemi/iommu.c | 2 +-
arch/powerpc/platforms/pasemi/misc.c | 3 +-
arch/powerpc/platforms/pasemi/pci.c | 4 +--
arch/powerpc/platforms/pasemi/setup.c | 53 ++++++++++++++---------------
7 files changed, 36 insertions(+), 38 deletions(-)
diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c
index 2c72263..c80f72c 100644
--- a/arch/powerpc/platforms/pasemi/dma_lib.c
+++ b/arch/powerpc/platforms/pasemi/dma_lib.c
@@ -531,7 +531,7 @@ int pasemi_dma_init(void)
iob_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
if (!iob_pdev) {
BUG();
- printk(KERN_WARNING "Can't find I/O Bridge\n");
+ pr_warn("Can't find I/O Bridge\n");
err = -ENODEV;
goto out;
}
@@ -540,7 +540,7 @@ int pasemi_dma_init(void)
dma_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa007, NULL);
if (!dma_pdev) {
BUG();
- printk(KERN_WARNING "Can't find DMA controller\n");
+ pr_warn("Can't find DMA controller\n");
err = -ENODEV;
goto out;
}
@@ -623,7 +623,7 @@ int pasemi_dma_init(void)
pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 0xffffffff);
pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 0xffffffff);
- printk(KERN_INFO "PA Semi PWRficient DMA library initialized "
+ pr_info("PA Semi PWRficient DMA library initialized "
"(%d tx, %d rx channels)\n", num_txch, num_rxch);
out:
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
index c23e609..6f35a2a 100644
--- a/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -256,7 +256,7 @@ static int gpio_mdio_probe(struct platform_device *ofdev)
err = of_mdiobus_register(new_bus, np);
if (err != 0) {
- printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
+ pr_err("%s: Cannot register as MDIO bus, err %d\n",
new_bus->name, err);
goto out_free_irq;
}
diff --git a/arch/powerpc/platforms/pasemi/idle.c b/arch/powerpc/platforms/pasemi/idle.c
index 44e0d92..8bb4e80 100644
--- a/arch/powerpc/platforms/pasemi/idle.c
+++ b/arch/powerpc/platforms/pasemi/idle.c
@@ -78,13 +78,13 @@ static int pasemi_system_reset_exception(struct pt_regs *regs)
static int __init pasemi_idle_init(void)
{
#ifndef CONFIG_PPC_PASEMI_CPUFREQ
- printk(KERN_WARNING "No cpufreq driver, powersavings modes disabled\n");
+ pr_warn("No cpufreq driver, powersavings modes disabled\n");
current_mode = 0;
#endif
ppc_md.system_reset_exception = pasemi_system_reset_exception;
ppc_md.power_save = modes[current_mode].entry;
- printk(KERN_INFO "Using PA6T idle loop (%s)\n", modes[current_mode].name);
+ pr_info("Using PA6T idle loop (%s)\n", modes[current_mode].name);
return 0;
}
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 78b80cb..f06c83f 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -210,7 +210,7 @@ static int __init iob_init(struct device_node *dn)
/* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */
iob_l2_base = (u32 *)__va(memblock_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
- printk(KERN_INFO "IOBMAP L2 allocated at: %p\n", iob_l2_base);
+ pr_info("IOBMAP L2 allocated at: %p\n", iob_l2_base);
/* Allocate a spare page to map all invalid IOTLB pages. */
tmp = memblock_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
diff --git a/arch/powerpc/platforms/pasemi/misc.c b/arch/powerpc/platforms/pasemi/misc.c
index 8571e7b..f60f4b7 100644
--- a/arch/powerpc/platforms/pasemi/misc.c
+++ b/arch/powerpc/platforms/pasemi/misc.c
@@ -69,8 +69,7 @@ static int __init pasemi_register_i2c_devices(void)
addr = of_get_property(node, "reg", &len);
if (!addr || len < sizeof(int) ||
*addr > (1 << 10) - 1) {
- printk(KERN_WARNING
- "pasemi_register_i2c_devices: "
+ pr_warn("pasemi_register_i2c_devices: "
"invalid i2c device entry\n");
continue;
}
diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
index aea9ff2..c7c8607 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -205,7 +205,7 @@ static int __init pas_add_bridge(struct device_node *dev)
setup_pa_pxp(hose);
- printk(KERN_INFO "Found PA-PXP PCI host bridge.\n");
+ pr_info("Found PA-PXP PCI host bridge.\n");
/* Interpret the "ranges" property */
pci_process_bridge_OF_ranges(hose, dev, 1);
@@ -219,7 +219,7 @@ void __init pas_pci_init(void)
root = of_find_node_by_path("/");
if (!root) {
- printk(KERN_CRIT "pas_pci_init: can't find root "
+ pr_crit("pas_pci_init: can't find root "
"of device tree\n");
return;
}
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index d0b8ae5..9a6eb04 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -207,8 +207,7 @@ static __init void pas_init_IRQ(void)
break;
}
if (!mpic_node) {
- printk(KERN_ERR
- "Failed to locate the MPIC interrupt controller\n");
+ pr_err("Failed to locate the MPIC interrupt controller\n");
return;
}
@@ -217,12 +216,12 @@ static __init void pas_init_IRQ(void)
naddr = of_n_addr_cells(root);
opprop = of_get_property(root, "platform-open-pic", &opplen);
if (!opprop) {
- printk(KERN_ERR "No platform-open-pic property.\n");
+ pr_err("No platform-open-pic property.\n");
of_node_put(root);
return;
}
openpic_addr = of_read_number(opprop, naddr);
- printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
+ pr_debug("OpenPIC addr: %lx\n", openpic_addr);
mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS | MPIC_NO_RESET;
@@ -265,72 +264,72 @@ static int pas_machine_check_handler(struct pt_regs *regs)
srr1 = regs->msr;
if (nmi_virq && mpic_get_mcirq() == nmi_virq) {
- printk(KERN_ERR "NMI delivered\n");
+ pr_err("NMI delivered\n");
debugger(regs);
mpic_end_irq(irq_get_irq_data(nmi_virq));
goto out;
}
dsisr = mfspr(SPRN_DSISR);
- printk(KERN_ERR "Machine Check on CPU %d\n", cpu);
- printk(KERN_ERR "SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1);
- printk(KERN_ERR "DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar);
- printk(KERN_ERR "BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER),
+ pr_err("Machine Check on CPU %d\n", cpu);
+ pr_err("SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1);
+ pr_err("DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar);
+ pr_err("BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER),
mfspr(SPRN_PA6T_MER));
- printk(KERN_ERR "IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER),
+ pr_err("IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER),
mfspr(SPRN_PA6T_DER));
- printk(KERN_ERR "Cause:\n");
+ pr_err("Cause:\n");
if (srr1 & 0x200000)
- printk(KERN_ERR "Signalled by SDC\n");
+ pr_err("Signalled by SDC\n");
if (srr1 & 0x100000) {
- printk(KERN_ERR "Load/Store detected error:\n");
+ pr_err("Load/Store detected error:\n");
if (dsisr & 0x8000)
- printk(KERN_ERR "D-cache ECC double-bit error or bus error\n");
+ pr_err("D-cache ECC double-bit error or bus error\n");
if (dsisr & 0x4000)
- printk(KERN_ERR "LSU snoop response error\n");
+ pr_err("LSU snoop response error\n");
if (dsisr & 0x2000) {
- printk(KERN_ERR "MMU SLB multi-hit or invalid B field\n");
+ pr_err("MMU SLB multi-hit or invalid B field\n");
dump_slb = 1;
}
if (dsisr & 0x1000)
- printk(KERN_ERR "Recoverable Duptags\n");
+ pr_err("Recoverable Duptags\n");
if (dsisr & 0x800)
- printk(KERN_ERR "Recoverable D-cache parity error count overflow\n");
+ pr_err("Recoverable D-cache parity error count overflow\n");
if (dsisr & 0x400)
- printk(KERN_ERR "TLB parity error count overflow\n");
+ pr_err("TLB parity error count overflow\n");
}
if (srr1 & 0x80000)
- printk(KERN_ERR "Bus Error\n");
+ pr_err("Bus Error\n");
if (srr1 & 0x40000) {
- printk(KERN_ERR "I-side SLB multiple hit\n");
+ pr_err("I-side SLB multiple hit\n");
dump_slb = 1;
}
if (srr1 & 0x20000)
- printk(KERN_ERR "I-cache parity error hit\n");
+ pr_err("I-cache parity error hit\n");
if (num_mce_regs == 0)
- printk(KERN_ERR "No MCE registers mapped yet, can't dump\n");
+ pr_err("No MCE registers mapped yet, can't dump\n");
else
- printk(KERN_ERR "SoC debug registers:\n");
+ pr_err("SoC debug registers:\n");
for (i = 0; i < num_mce_regs; i++)
- printk(KERN_ERR "%s: 0x%08x\n", mce_regs[i].name,
+ pr_err("%s: 0x%08x\n", mce_regs[i].name,
in_le32(mce_regs[i].addr));
if (dump_slb) {
unsigned long e, v;
int i;
- printk(KERN_ERR "slb contents:\n");
+ pr_err("slb contents:\n");
for (i = 0; i < mmu_slb_size; i++) {
asm volatile("slbmfee %0,%1" : "=r" (e) : "r" (i));
asm volatile("slbmfev %0,%1" : "=r" (v) : "r" (i));
- printk(KERN_ERR "%02d %016lx %016lx\n", i, e, v);
+ pr_err("%02d %016lx %016lx\n", i, e, v);
}
}
More information about the Linuxppc-dev
mailing list