[PATCH v5 2/2] hwmon: ibmpowernv: Add attributes to enable/disable sensor groups
Shilpasri G Bhat
shilpa.bhat at linux.vnet.ibm.com
Wed Jul 18 16:57:59 AEST 2018
Hi,
On 07/17/2018 07:17 PM, Guenter Roeck wrote:
> On 07/14/2018 11:54 PM, Shilpasri G Bhat wrote:
>> On-Chip-Controller(OCC) is an embedded micro-processor in POWER9 chip
>> which measures various system and chip level sensors. These sensors
>> comprises of environmental sensors (like power, temperature, current
>> and voltage) and performance sensors (like utilization, frequency).
>> All these sensors are copied to main memory at a regular interval of
>> 100ms. OCC provides a way to select a group of sensors that is copied
>> to the main memory to increase the update frequency of selected sensor
>> groups. When a sensor-group is disabled, OCC will not copy it to main
>> memory and those sensors read 0 values.
>>
>> This patch provides support for enabling/disabling the sensor groups
>> like power, temperature, current and voltage. This patch adds new
>> per-senor sysfs attribute to disable and enable them.
>>
>> Signed-off-by: Shilpasri G Bhat <shilpa.bhat at linux.vnet.ibm.com>
>> ---
>> Changes from v4:
>> - As per Mpe's suggestion store device_node instead of phandles and
>> clean it after init
>> - s/sg_data/sgrp_data
>>
>> Documentation/hwmon/ibmpowernv | 43 ++++++-
>> drivers/hwmon/ibmpowernv.c | 256 +++++++++++++++++++++++++++++++++++------
>> 2 files changed, 265 insertions(+), 34 deletions(-)
>>
>> diff --git a/Documentation/hwmon/ibmpowernv b/Documentation/hwmon/ibmpowernv
>> index 8826ba2..5646825 100644
>> --- a/Documentation/hwmon/ibmpowernv
>> +++ b/Documentation/hwmon/ibmpowernv
>> @@ -33,9 +33,48 @@ fanX_input Measured RPM value.
>> fanX_min Threshold RPM for alert generation.
>> fanX_fault 0: No fail condition
>> 1: Failing fan
>> +
>> tempX_input Measured ambient temperature.
>> tempX_max Threshold ambient temperature for alert generation.
>> -inX_input Measured power supply voltage
>> +tempX_highest Historical maximum temperature
>> +tempX_lowest Historical minimum temperature
>> +tempX_enable Enable/disable all temperature sensors belonging to the
>> + sub-group. In POWER9, this attribute corresponds to
>> + each OCC. Using this attribute each OCC can be asked to
>> + disable/enable all of its temperature sensors.
>> + 1: Enable
>> + 0: Disable
>> +
>> +inX_input Measured power supply voltage (millivolt)
>> inX_fault 0: No fail condition.
>> 1: Failing power supply.
>> -power1_input System power consumption (microWatt)
>> +inX_highest Historical maximum voltage
>> +inX_lowest Historical minimum voltage
>> +inX_enable Enable/disable all voltage sensors belonging to the
>> + sub-group. In POWER9, this attribute corresponds to
>> + each OCC. Using this attribute each OCC can be asked to
>> + disable/enable all of its voltage sensors.
>> + 1: Enable
>> + 0: Disable
>> +
>> +powerX_input Power consumption (microWatt)
>> +powerX_input_highest Historical maximum power
>> +powerX_input_lowest Historical minimum power
>> +powerX_enable Enable/disable all power sensors belonging to the
>> + sub-group. In POWER9, this attribute corresponds to
>> + each OCC. Using this attribute each OCC can be asked to
>> + disable/enable all of its power sensors.
>> + 1: Enable
>> + 0: Disable
>> +
>> +currX_input Measured current (milliampere)
>> +currX_highest Historical maximum current
>> +currX_lowest Historical minimum current
>> +currX_enable Enable/disable all current sensors belonging to the
>> + sub-group. In POWER9, this attribute corresponds to
>> + each OCC. Using this attribute each OCC can be asked to
>> + disable/enable all of its current sensors.
>> + 1: Enable
>> + 0: Disable
>> +
>> +energyX_input Cumulative energy (microJoule)
>> diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c
>> index f829dad..a509b9b 100644
>> --- a/drivers/hwmon/ibmpowernv.c
>> +++ b/drivers/hwmon/ibmpowernv.c
>> @@ -90,11 +90,23 @@ struct sensor_data {
>> char label[MAX_LABEL_LEN];
>> char name[MAX_ATTR_LEN];
>> struct device_attribute dev_attr;
>> + struct sensor_group_data *sgrp_data;
>> +};
>> +
>> +struct sensor_group_data {
>> + struct mutex mutex;
>> + struct device_node **of_nodes;
>> + u32 gid;
>> + u32 nr_nodes;
>> + enum sensors type;
>> + bool enable;
>> };
>> struct platform_data {
>> const struct attribute_group *attr_groups[MAX_SENSOR_TYPE + 1];
>> + struct sensor_group_data *sgrp_data;
>> u32 sensors_count; /* Total count of sensors from each group */
>> + u32 nr_sensor_groups; /* Total number of sensor groups */
>> };
>> static ssize_t show_sensor(struct device *dev, struct device_attribute
>> *devattr,
>> @@ -105,6 +117,9 @@ static ssize_t show_sensor(struct device *dev, struct
>> device_attribute *devattr,
>> ssize_t ret;
>> u64 x;
>> + if (sdata->sgrp_data && !sdata->sgrp_data->enable)
>> + return -ENODATA;
>> +
>> ret = opal_get_sensor_data_u64(sdata->id, &x);
>> if (ret)
>> @@ -120,6 +135,46 @@ static ssize_t show_sensor(struct device *dev, struct
>> device_attribute *devattr,
>> return sprintf(buf, "%llu\n", x);
>> }
>> +static ssize_t show_enable(struct device *dev,
>> + struct device_attribute *devattr, char *buf)
>> +{
>> + struct sensor_data *sdata = container_of(devattr, struct sensor_data,
>> + dev_attr);
>> +
>> + return sprintf(buf, "%u\n", sdata->sgrp_data->enable);
>> +}
>> +
>> +static ssize_t store_enable(struct device *dev,
>> + struct device_attribute *devattr,
>> + const char *buf, size_t count)
>> +{
>> + struct sensor_data *sdata = container_of(devattr, struct sensor_data,
>> + dev_attr);
>> + struct sensor_group_data *sgrp_data = sdata->sgrp_data;
>> + bool data;
>> + int ret;
>> +
>> + ret = kstrtobool(buf, &data);
>> + if (ret)
>> + return ret;
>> +
>> + ret = mutex_lock_interruptible(&sgrp_data->mutex);
>> + if (ret)
>> + return ret;
>> +
>> + if (data != sgrp_data->enable) {
>> + ret = sensor_group_enable(sgrp_data->gid, data);
>> + if (!ret)
>> + sgrp_data->enable = data;
>> + }
>> +
>> + if (!ret)
>> + ret = count;
>> +
>> + mutex_unlock(&sgrp_data->mutex);
>> + return ret;
>> +}
>> +
>> static ssize_t show_label(struct device *dev, struct device_attribute *devattr,
>> char *buf)
>> {
>> @@ -292,12 +347,129 @@ static u32 get_sensor_hwmon_index(struct sensor_data
>> *sdata,
>> return ++sensor_groups[sdata->type].hwmon_index;
>> }
>> +static int init_sensor_group_data(struct platform_device *pdev,
>> + struct platform_data *pdata)
>> +{
>> + struct sensor_group_data *sgrp_data;
>> + struct device_node *groups, *sgrp;
>> + enum sensors type;
>> + int count = 0, ret = 0;
>> +
>> + groups = of_find_node_by_path("/ibm,opal/sensor-groups");
>> + if (!groups)
>> + return ret;
>> +
>> + for_each_child_of_node(groups, sgrp) {
>> + type = get_sensor_type(sgrp);
>> + if (type != MAX_SENSOR_TYPE)
>> + pdata->nr_sensor_groups++;
>> + }
>> +
>> + if (!pdata->nr_sensor_groups)
>> + goto out;
>> +
>> + sgrp_data = devm_kcalloc(&pdev->dev, pdata->nr_sensor_groups,
>> + sizeof(*sgrp_data), GFP_KERNEL);
>> + if (!sgrp_data) {
>> + ret = -ENOMEM;
>> + goto out;
>> + }
>> +
>> + for_each_child_of_node(groups, sgrp) {
>> + const __be32 *phandles;
>> + int len, gid, i, k = 0;
>> +
>> + type = get_sensor_type(sgrp);
>> + if (type == MAX_SENSOR_TYPE)
>> + continue;
>> +
>> + if (of_property_read_u32(sgrp, "sensor-group-id", &gid))
>> + continue;
>> +
>> + phandles = of_get_property(sgrp, "sensors", &len);
>> + if (!phandles)
>> + continue;
>> +
>> + len /= sizeof(u32);
>> + if (!len)
>> + continue;
>> +
>> + sgrp_data[count].of_nodes = devm_kcalloc(&pdev->dev,
>> + sizeof(struct device_node *),
>> + len, GFP_KERNEL);
>> + if (!sgrp_data[count].of_nodes) {
>> + ret = -ENOMEM;
>> + of_node_put(sgrp);
>> + goto out;
>> + }
>> +
>> + for (i = 0; i < len; i++) {
>> + struct device_node *node;
>> +
>> + node = of_parse_phandle(sgrp, "sensors", i);
>> + if (!node)
>> + continue;
>> + sgrp_data[count].of_nodes[k++] = node;
>
> I don't immediately see where "node" is used later. As mentioned below,
> I'll need to have a much closer look into the code to understand what
> is going on here.
sgrp_data[count].of_nodes is used to store the pointers to sensor nodes
belonging to sensor-group 'sgrp_data[count]' . This is being used later in
to find the sensor-group of each sensor in create_device_attrs()
>
>> + }
>> +
>> + sensor_groups[type].attr_count++;
>> + sgrp_data[count].gid = gid;
>> + sgrp_data[count].type = type;
>> + sgrp_data[count].nr_nodes = len;
>> + mutex_init(&sgrp_data[count].mutex);
>> + sgrp_data[count++].enable = false;
>> + }
>> + pdata->sgrp_data = sgrp_data;
>> +out:
>> + of_node_put(groups);
>> + return ret;
>> +}
>> +
>> +static struct sensor_group_data *get_sensor_group(struct platform_data *pdata,
>> + struct device_node *node,
>> + enum sensors type)
>> +{
>> + struct sensor_group_data *sgrp_data = pdata->sgrp_data;
>> + int i, j;
>> +
>> + for (i = 0; i < pdata->nr_sensor_groups; i++) {
>> + if (type != sgrp_data[i].type)
>> + continue;
>> +
>> + for (j = 0; j < sgrp_data[i].nr_nodes; j++)
>> + if (sgrp_data[i].of_nodes[j] == node)
>> + return &sgrp_data[i];
>> + }
>> +
>> + return NULL;
>> +}
>> +
>> +static void clean_sensor_group_of_node(struct platform_device *pdev)
>> +{
>> + struct platform_data *pdata = platform_get_drvdata(pdev);
>> + struct sensor_group_data *sgrp_data = pdata->sgrp_data;
>> + int i, j;
>> +
>> + for (i = 0; i < pdata->nr_sensor_groups; i++) {
>> + for (j = 0; j < sgrp_data[i].nr_nodes; j++)
>> + of_node_put(sgrp_data[i].of_nodes[j]);
>> +
>> + devm_kfree(&pdev->dev, sgrp_data[i].of_nodes);
>
> The whole point of calling devm_kzalloc() is that calling devm_kfree()
> is not necessary. Any call to devm_kfree() is a strong indication
> that something is wrong.
>
>> + sgrp_data[i].of_nodes = NULL;
>> + }
>> +}
>> +
>
> Ok, this will require a detailed review. I don't understand what this
> function is about. It seems that sgrp_data[].of_nodes is only allocated
> to be freed at the end of create_dev_attrs(), suggesting that the cleared
> data isn't needed for runtime and thus should not be stored in an
> array in the first place. I'll have to understand this much better
> than I do right now before approving it.
>
Yeah sgrp_data[].of_nodes is not required at runtime. This can be defined locally.
Thanks and Regards,
Shilpa
> Guenter
>
>> static int populate_attr_groups(struct platform_device *pdev)
>> {
>> struct platform_data *pdata = platform_get_drvdata(pdev);
>> const struct attribute_group **pgroups = pdata->attr_groups;
>> struct device_node *opal, *np;
>> enum sensors type;
>> + int ret;
>> +
>> + ret = init_sensor_group_data(pdev, pdata);
>> + if (ret)
>> + return ret;
>> opal = of_find_node_by_path("/ibm,opal/sensors");
>> for_each_child_of_node(opal, np) {
>> @@ -344,7 +516,10 @@ static int populate_attr_groups(struct platform_device
>> *pdev)
>> static void create_hwmon_attr(struct sensor_data *sdata, const char *attr_name,
>> ssize_t (*show)(struct device *dev,
>> struct device_attribute *attr,
>> - char *buf))
>> + char *buf),
>> + ssize_t (*store)(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count))
>> {
>> snprintf(sdata->name, MAX_ATTR_LEN, "%s%d_%s",
>> sensor_groups[sdata->type].name, sdata->hwmon_index,
>> @@ -352,23 +527,33 @@ static void create_hwmon_attr(struct sensor_data *sdata,
>> const char *attr_name,
>> sysfs_attr_init(&sdata->dev_attr.attr);
>> sdata->dev_attr.attr.name = sdata->name;
>> - sdata->dev_attr.attr.mode = S_IRUGO;
>> sdata->dev_attr.show = show;
>> + if (store) {
>> + sdata->dev_attr.store = store;
>> + sdata->dev_attr.attr.mode = 0664;
>> + } else {
>> + sdata->dev_attr.attr.mode = 0444;
>> + }
>> }
>> static void populate_sensor(struct sensor_data *sdata, int od, int hd, int
>> sid,
>> const char *attr_name, enum sensors type,
>> const struct attribute_group *pgroup,
>> + struct sensor_group_data *sgrp_data,
>> ssize_t (*show)(struct device *dev,
>> struct device_attribute *attr,
>> - char *buf))
>> + char *buf),
>> + ssize_t (*store)(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count))
>> {
>> sdata->id = sid;
>> sdata->type = type;
>> sdata->opal_index = od;
>> sdata->hwmon_index = hd;
>> - create_hwmon_attr(sdata, attr_name, show);
>> + create_hwmon_attr(sdata, attr_name, show, store);
>> pgroup->attrs[sensor_groups[type].attr_count++] = &sdata->dev_attr.attr;
>> + sdata->sgrp_data = sgrp_data;
>> }
>> static char *get_max_attr(enum sensors type)
>> @@ -403,24 +588,23 @@ static int create_device_attrs(struct platform_device
>> *pdev)
>> const struct attribute_group **pgroups = pdata->attr_groups;
>> struct device_node *opal, *np;
>> struct sensor_data *sdata;
>> - u32 sensor_id;
>> - enum sensors type;
>> u32 count = 0;
>> - int err = 0;
>> + u32 group_attr_id[MAX_SENSOR_TYPE] = {0};
>> - opal = of_find_node_by_path("/ibm,opal/sensors");
>> sdata = devm_kcalloc(&pdev->dev,
>> pdata->sensors_count, sizeof(*sdata),
>> GFP_KERNEL);
>> - if (!sdata) {
>> - err = -ENOMEM;
>> - goto exit_put_node;
>> - }
>> + if (!sdata)
>> + return -ENOMEM;
>> + opal = of_find_node_by_path("/ibm,opal/sensors");
>> for_each_child_of_node(opal, np) {
>> + struct sensor_group_data *sgrp_data;
>> const char *attr_name;
>> - u32 opal_index;
>> + u32 opal_index, hw_id;
>> + u32 sensor_id;
>> const char *label;
>> + enum sensors type;
>> if (np->name == NULL)
>> continue;
>> @@ -456,14 +640,12 @@ static int create_device_attrs(struct platform_device
>> *pdev)
>> opal_index = INVALID_INDEX;
>> }
>> - sdata[count].opal_index = opal_index;
>> - sdata[count].hwmon_index =
>> - get_sensor_hwmon_index(&sdata[count], sdata, count);
>> -
>> - create_hwmon_attr(&sdata[count], attr_name, show_sensor);
>> -
>> - pgroups[type]->attrs[sensor_groups[type].attr_count++] =
>> - &sdata[count++].dev_attr.attr;
>> + hw_id = get_sensor_hwmon_index(&sdata[count], sdata, count);
>> + sgrp_data = get_sensor_group(pdata, np, type);
>> + populate_sensor(&sdata[count], opal_index, hw_id, sensor_id,
>> + attr_name, type, pgroups[type], sgrp_data,
>> + show_sensor, NULL);
>> + count++;
>> if (!of_property_read_string(np, "label", &label)) {
>> /*
>> @@ -474,35 +656,44 @@ static int create_device_attrs(struct platform_device
>> *pdev)
>> */
>> make_sensor_label(np, &sdata[count], label);
>> - populate_sensor(&sdata[count], opal_index,
>> - sdata[count - 1].hwmon_index,
>> + populate_sensor(&sdata[count], opal_index, hw_id,
>> sensor_id, "label", type, pgroups[type],
>> - show_label);
>> + NULL, show_label, NULL);
>> count++;
>> }
>> if (!of_property_read_u32(np, "sensor-data-max", &sensor_id)) {
>> attr_name = get_max_attr(type);
>> - populate_sensor(&sdata[count], opal_index,
>> - sdata[count - 1].hwmon_index,
>> + populate_sensor(&sdata[count], opal_index, hw_id,
>> sensor_id, attr_name, type,
>> - pgroups[type], show_sensor);
>> + pgroups[type], sgrp_data, show_sensor,
>> + NULL);
>> count++;
>> }
>> if (!of_property_read_u32(np, "sensor-data-min", &sensor_id)) {
>> attr_name = get_min_attr(type);
>> - populate_sensor(&sdata[count], opal_index,
>> - sdata[count - 1].hwmon_index,
>> + populate_sensor(&sdata[count], opal_index, hw_id,
>> sensor_id, attr_name, type,
>> - pgroups[type], show_sensor);
>> + pgroups[type], sgrp_data, show_sensor,
>> + NULL);
>> + count++;
>> + }
>> +
>> + if (sgrp_data && !sgrp_data->enable) {
>> + sgrp_data->enable = true;
>> + hw_id = ++group_attr_id[type];
>> + populate_sensor(&sdata[count], opal_index, hw_id,
>> + sgrp_data->gid, "enable", type,
>> + pgroups[type], sgrp_data, show_enable,
>> + store_enable);
>> count++;
>> }
>> }
>> -exit_put_node:
>> of_node_put(opal);
>> - return err;
>> + clean_sensor_group_of_node(pdev);
>> + return 0;
>> }
>> static int ibmpowernv_probe(struct platform_device *pdev)
>> @@ -517,6 +708,7 @@ static int ibmpowernv_probe(struct platform_device *pdev)
>> platform_set_drvdata(pdev, pdata);
>> pdata->sensors_count = 0;
>> + pdata->nr_sensor_groups = 0;
>> err = populate_attr_groups(pdev);
>> if (err)
>> return err;
>>
>
More information about the Linuxppc-dev
mailing list