[PATCH 1/3] powerpc/powernv/pci: Track largest available TCE order per PHB

[Alexey Kardashevskiy]

On Fri, 29 Jun 2018 17:34:35 +1000
Russell Currey <ruscur at russell.cc> wrote:

> Knowing the largest possible TCE size of a PHB is useful, so get it out
> of the device tree.  This relies on the property being added in OPAL.
> 
> It is assumed that any PHB4 or later machine would be running firmware
> that implemented this property, and otherwise assumed to be PHB3, which
> has a maximum TCE order of 28 bits or 256MB TCEs.
> 
> This is used later in the series.
> 
> Signed-off-by: Russell Currey <ruscur at russell.cc>
> ---
>  arch/powerpc/platforms/powernv/pci-ioda.c | 16 ++++++++++++++++
>  arch/powerpc/platforms/powernv/pci.h      |  3 +++
>  2 files changed, 19 insertions(+)
> 
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index 5bd0eb6681bc..17c590087279 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -3873,11 +3873,13 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
>  	struct resource r;
>  	const __be64 *prop64;
>  	const __be32 *prop32;
> +	struct property *prop;
>  	int len;
>  	unsigned int segno;
>  	u64 phb_id;
>  	void *aux;
>  	long rc;
> +	u32 val;
>  
>  	if (!of_device_is_available(np))
>  		return;
> @@ -4016,6 +4018,20 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
>  	}
>  	phb->ioda.pe_array = aux + pemap_off;
>  
> +	phb->ioda.max_tce_order = 0;
> +	/* Get TCE order from the DT.  If it's not present, assume P8 */
> +	if (!of_get_property(np, "ibm,supported-tce-sizes", NULL)) {
> +		phb->ioda.max_tce_order = 28; /* assume P8 256mb TCEs */
> +	} else {
> +		of_property_for_each_u32(np, "ibm,supported-tce-sizes", prop,
> +					 prop32, val) {
> +			if (val > phb->ioda.max_tce_order)
> +				phb->ioda.max_tce_order = val;
> +		}
> +		pr_debug("PHB%llx Found max TCE order of %d bits\n",
> +			 phb->opal_id, phb->ioda.max_tce_order);
> +	}


pnv_ioda_parse_tce_sizes() does this, use it. It even reports 256MB pages for P8 as in v4.18-rc3. And since this is going to be used once per device driver bind operation, there is no need at all to cache it, just call ilog2(pnv_ioda_parse_tce_sizes()) whenever you want to know the maximum page size.


> +
>  	/*
>  	 * Choose PE number for root bus, which shouldn't have
>  	 * M64 resources consumed by its child devices. To pick
> diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
> index eada4b6068cb..c9952def5e93 100644
> --- a/arch/powerpc/platforms/powernv/pci.h
> +++ b/arch/powerpc/platforms/powernv/pci.h
> @@ -173,6 +173,9 @@ struct pnv_phb {
>  		struct list_head	pe_list;
>  		struct mutex            pe_list_mutex;
>  
> +		/* Largest supported TCE order bits */
> +		uint8_t			max_tce_order;
> +
>  		/* Reverse map of PEs, indexed by {bus, devfn} */
>  		unsigned int		pe_rmap[0x10000];
>  	} ioda;
> -- 
> 2.17.1
> 



--
Alexey