[PATCH v2 14/16] ASoC: fsl_ssi: Remove cpu_dai_drv from fsl_ssi structure

Maciej S. Szmigiero mail at maciej.szmigiero.name
Mon Jan 15 09:42:59 AEDT 2018


On 11.01.2018 07:43, Nicolin Chen wrote:
> The cpu_dai_drv is only used for symmetric_rates. So this patch replaces
> it with a synchronous boolean flag.

You make cpu_dai_drv common to all SSI instances instead of per-instance.

What if you have multiple SSIs in the system with different
symmetric_{rates,samplebits,channels} settings?

Maciej

> Signed-off-by: Nicolin Chen <nicoleotsuka at gmail.com>
> Tested-by: Caleb Crome <caleb at crome.org>
> ---
>  sound/soc/fsl/fsl_ssi.c | 32 ++++++++++++++++----------------
>  1 file changed, 16 insertions(+), 16 deletions(-)
> 
> diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
> index 213962a..716603c 100644
> --- a/sound/soc/fsl/fsl_ssi.c
> +++ b/sound/soc/fsl/fsl_ssi.c
> @@ -208,11 +208,11 @@ struct fsl_ssi_soc_data {
>   *
>   * @regs: Pointer to the regmap registers
>   * @irq: IRQ of this SSI
> - * @cpu_dai_drv: CPU DAI driver for this device
>   *
>   * @dai_fmt: DAI configuration this device is currently used with
>   * @streams: Mask of current active streams: BIT(TX) and BIT(RX)
>   * @i2s_net: I2S and Network mode configurations of SCR register
> + * @synchronous: Use synchronous mode - both of TX and RX use STCK and SFCK
>   * @use_dma: DMA is used or FIQ with stream filter
>   * @use_dual_fifo: DMA with support for dual FIFO mode
>   * @has_ipg_clk_name: If "ipg" is in the clock name list of device tree
> @@ -253,11 +253,11 @@ struct fsl_ssi_soc_data {
>  struct fsl_ssi {
>  	struct regmap *regs;
>  	int irq;
> -	struct snd_soc_dai_driver cpu_dai_drv;
>  
>  	unsigned int dai_fmt;
>  	u8 streams;
>  	u8 i2s_net;
> +	bool synchronous;
>  	bool use_dma;
>  	bool use_dual_fifo;
>  	bool has_ipg_clk_name;
> @@ -668,7 +668,6 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
>  	bool tx2, tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
>  	struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(dai);
>  	struct regmap *regs = ssi->regs;
> -	int synchronous = ssi->cpu_dai_drv.symmetric_rates, ret;
>  	u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
>  	unsigned long clkrate, baudrate, tmprate;
>  	unsigned int slots = params_channels(hw_params);
> @@ -676,6 +675,7 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
>  	u64 sub, savesub = 100000;
>  	unsigned int freq;
>  	bool baudclk_is_used;
> +	int ret;
>  
>  	/* Override slots and slot_width if being specifically set... */
>  	if (ssi->slots)
> @@ -754,7 +754,7 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
>  	mask = SSI_SxCCR_PM_MASK | SSI_SxCCR_DIV2 | SSI_SxCCR_PSR;
>  
>  	/* STCCR is used for RX in synchronous mode */
> -	tx2 = tx || synchronous;
> +	tx2 = tx || ssi->synchronous;
>  	regmap_update_bits(regs, REG_SSI_SxCCR(tx2), mask, stccr);
>  
>  	if (!baudclk_is_used) {
> @@ -802,7 +802,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
>  	 * that should set separate configurations for STCCR and SRCCR
>  	 * despite running in the synchronous mode.
>  	 */
> -	if (enabled && ssi->cpu_dai_drv.symmetric_rates)
> +	if (enabled && ssi->synchronous)
>  		return 0;
>  
>  	if (fsl_ssi_is_i2s_master(ssi)) {
> @@ -834,7 +834,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
>  	}
>  
>  	/* In synchronous mode, the SSI uses STCCR for capture */
> -	tx2 = tx || ssi->cpu_dai_drv.symmetric_rates;
> +	tx2 = tx || ssi->synchronous;
>  	regmap_update_bits(regs, REG_SSI_SxCCR(tx2), SSI_SxCCR_WL_MASK, wl);
>  
>  	return 0;
> @@ -959,7 +959,7 @@ static int _fsl_ssi_set_dai_fmt(struct fsl_ssi *ssi, unsigned int fmt)
>  	srcr = strcr;
>  
>  	/* Set SYN mode and clear RXDIR bit when using SYN or AC97 mode */
> -	if (ssi->cpu_dai_drv.symmetric_rates || fsl_ssi_is_ac97(ssi)) {
> +	if (ssi->synchronous || fsl_ssi_is_ac97(ssi)) {
>  		srcr &= ~SSI_SRCR_RXDIR;
>  		scr |= SSI_SCR_SYN;
>  	}
> @@ -1360,6 +1360,7 @@ static void fsl_ssi_imx_clean(struct platform_device *pdev, struct fsl_ssi *ssi)
>  
>  static int fsl_ssi_probe(struct platform_device *pdev)
>  {
> +	struct snd_soc_dai_driver *cpu_dai_drv;
>  	struct fsl_ssi *ssi;
>  	int ret = 0;
>  	struct device_node *np = pdev->dev.of_node;
> @@ -1394,14 +1395,12 @@ static int fsl_ssi_probe(struct platform_device *pdev)
>  	ssi->use_dma = !of_property_read_bool(np, "fsl,fiq-stream-filter");
>  
>  	if (fsl_ssi_is_ac97(ssi)) {
> -		memcpy(&ssi->cpu_dai_drv, &fsl_ssi_ac97_dai,
> -		       sizeof(fsl_ssi_ac97_dai));
> +		cpu_dai_drv = &fsl_ssi_ac97_dai;
>  		fsl_ac97_data = ssi;
>  	} else {
> -		memcpy(&ssi->cpu_dai_drv, &fsl_ssi_dai_template,
> -		       sizeof(fsl_ssi_dai_template));
> +		cpu_dai_drv = &fsl_ssi_dai_template;
>  	}
> -	ssi->cpu_dai_drv.name = dev_name(dev);
> +	cpu_dai_drv->name = dev_name(dev);
>  
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	iomem = devm_ioremap_resource(dev, res);
> @@ -1439,11 +1438,12 @@ static int fsl_ssi_probe(struct platform_device *pdev)
>  	/* Set software limitations for synchronous mode */
>  	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
>  		if (!fsl_ssi_is_ac97(ssi)) {
> -			ssi->cpu_dai_drv.symmetric_rates = 1;
> -			ssi->cpu_dai_drv.symmetric_samplebits = 1;
> +			cpu_dai_drv->symmetric_rates = 1;
> +			cpu_dai_drv->symmetric_samplebits = 1;
> +			ssi->synchronous = true;
>  		}
>  
> -		ssi->cpu_dai_drv.symmetric_channels = 1;
> +		cpu_dai_drv->symmetric_channels = 1;
>  	}
>  
>  	/* Fetch FIFO depth; Set to 8 for older DT without this property */
> @@ -1498,7 +1498,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
>  	}
>  
>  	ret = devm_snd_soc_register_component(dev, &fsl_ssi_component,
> -					      &ssi->cpu_dai_drv, 1);
> +					      cpu_dai_drv, 1);
>  	if (ret) {
>  		dev_err(dev, "failed to register DAI: %d\n", ret);
>  		goto error_asoc_register;
> 



More information about the Linuxppc-dev mailing list