[PATCH v3] powerpc/64s: Improve local TLB flush for boot and MCE on POWER9

[Nicholas Piggin]

On Wed, 03 Jan 2018 12:34:34 +0530
"Aneesh Kumar K.V" <aneesh.kumar at linux.vnet.ibm.com> wrote:

> Nicholas Piggin <npiggin at gmail.com> writes:
> 
> > There are several cases outside the normal address space management
> > where a CPU's entire local TLB is to be flushed:
> >
> >   1. Booting the kernel, in case something has left stale entries in
> >      the TLB (e.g., kexec).
> >
> >   2. Machine check, to clean corrupted TLB entries.
> >
> > One other place where the TLB is flushed, is waking from deep idle
> > states. The flush is a side-effect of calling ->cpu_restore with the
> > intention of re-setting various SPRs. The flush itself is unnecessary
> > because in the first case, the TLB should not acquire new corrupted
> > TLB entries as part of sleep/wake (though they may be lost).
> >
> > This type of TLB flush is coded inflexibly, several times for each CPU
> > type, and they have a number of problems with ISA v3.0B:
> >
> > - The current radix mode of the MMU is not taken into account, it is
> >   always done as a hash flushn For IS=2 (LPID-matching flush from host)
> >   and IS=3 with HV=0 (guest kernel flush), tlbie(l) is undefined if
> >   the R field does not match the current radix mode.
> >
> > - ISA v3.0B hash must flush the partition and process table caches as
> >   well.
> >
> > - ISA v3.0B radix must flush partition and process scoped translations,
> >   partition and process table caches, and also the page walk cache.
> >
> > So consolidate the flushing code and implement it in C and inline asm
> > under the mm/ directory with the rest of the flush code. Add ISA v3.0B
> > cases for radix and hash, and use the radix flush in radix environment.
> >
> > Provide a way for IS=2 (LPID flush) to specify the radix mode of the
> > partition. Have KVM pass in the radix mode of the guest.
> >
> > Take out the flushes from early cputable/dt_cpu_ftrs detection hooks,
> > and move it later in the boot process after, the MMU registers are set
> > up and before relocation is first turned on.
> >
> > The TLB flush is no longer called when restoring from deep idle states.
> > This was not be done as a separate step because booting secondaries
> > uses the same cpu_restore as idle restore, which needs the TLB flush.
> >
> > Signed-off-by: Nicholas Piggin <npiggin at gmail.com>  
> 
> ......
> 
> > diff --git a/arch/powerpc/kvm/book3s_hv_ras.c b/arch/powerpc/kvm/book3s_hv_ras.c
> > index c356f9a40b24..e61066bb6725 100644
> > --- a/arch/powerpc/kvm/book3s_hv_ras.c
> > +++ b/arch/powerpc/kvm/book3s_hv_ras.c
> > @@ -87,8 +87,7 @@ static long kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu)
> >  				   DSISR_MC_SLB_PARITY | DSISR_MC_DERAT_MULTI);
> >  		}
> >  		if (dsisr & DSISR_MC_TLB_MULTI) {
> > -			if (cur_cpu_spec && cur_cpu_spec->flush_tlb)
> > -				cur_cpu_spec->flush_tlb(TLB_INVAL_SCOPE_LPID);
> > +			tlbiel_all_lpid(vcpu->kvm->arch.radix);  
> 
> Why use vcpu->kvm-arch.radix? why not TLB_INVAL_SCOPE_LPID?

tlbiel_all_lpid always does TLB_INVAL_SCOPE_LPID. The radix field needs to
be supplied to LPID flushes because by the ISA, the operation is undefined
if R field does not match the radix mode of the target partition. This is
the first dot point of problems in the changelog.

Thanks,
Nick