[PATCH v3 3/7] platforms/pseries: Set eeh_pe of EEH_PE_VF type

[Bryant G. Ly]

To correctly use EEH code one has to make
sure that the EEH_PE_VF is set for dynamic created
VFs. Therefore this patch allocates an eeh_pe of
eeh type EEH_PE_VF and associates PE with parent.

Signed-off-by: Bryant G. Ly <bryantly at linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare at linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/pci-bridge.h        |  5 ++++-
 arch/powerpc/platforms/pseries/eeh_pseries.c | 14 +++++++++++++-
 2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 9f66ddebb799..16d70740a76f 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -211,7 +211,10 @@ struct pci_dn {
 	unsigned int *pe_num_map;	/* PE# for the first VF PE or array */
 	bool    m64_single_mode;	/* Use M64 BAR in Single Mode */
 #define IODA_INVALID_M64        (-1)
-	int     (*m64_map)[PCI_SRIOV_NUM_BARS];
+	union {
+		int     (*m64_map)[PCI_SRIOV_NUM_BARS]; /*Only used in powernv */
+		int     last_allow_rc;	/* Only used in pSeries */
+	};
 #endif /* CONFIG_PCI_IOV */
 	int	mps;			/* Maximum Payload Size */
 	struct list_head child_list;
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index a671ef4f57f5..686e9c7feab5 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -58,6 +58,8 @@ static int ibm_configure_pe;
 void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 {
 	struct pci_dn *pdn = pci_get_pdn(pdev);
+	struct pci_dn *physfn_pdn;
+	struct eeh_dev *edev;
 
 	if (!pdev->is_virtfn)
 		return;
@@ -65,6 +67,14 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 	pdn->device_id  =  pdev->device;
 	pdn->vendor_id  =  pdev->vendor;
 	pdn->class_code =  pdev->class;
+	/* Last allow unfreeze return code used for retrieval
+	 * by user space in eeh-sysfs to show the last command
+	 * completion from platform
+	 */
+	pdn->last_allow_rc =  0;
+	physfn_pdn      =  pci_get_pdn(pdev->physfn);
+	pdn->pe_number  =  physfn_pdn->pe_num_map[pdn->vf_index];
+	edev = pdn_to_eeh_dev(pdn);
 
 	/*
 	 * The following operations will fail if VF's sysfs files
@@ -72,8 +82,10 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 	 */
 	eeh_add_device_early(pdn);
 	eeh_add_device_late(pdev);
+	edev->pe_config_addr =  (pdn->busno << 16) | (pdn->devfn << 8);
+	eeh_rmv_from_parent_pe(edev); /* Remove as it is adding to bus pe */
+	eeh_add_to_parent_pe(edev);   /* Add as VF PE type */
 	eeh_sysfs_add_device(pdev);
-
 }
 
 /*
-- 
2.14.3 (Apple Git-98)